Domica10

anwar tamimi

عضو فعال
إنضم
4 نوفمبر 2012
المشاركات
399
مستوى التفاعل
147
please need the mgcamd for this image dm 8000
 
قانون القسم (يجب ان تكون اللغة العربية فقط)

تستطيع تحميل الأيمو من سيرفر الصورة
 
اعتذر لكم لعدم وجود كيبورد عربي .ارجو من حضرتكم توضيح الmultibootselect الموجود في الصوره وكيف يعمل.ثم توضيح سبب الك

عند استعمال الdvdburn علی صورة Domica 10 يحدث crash.من فضلكم التعليق.

هل تقبل domica 10 الmultiboot؟baerry allen?او اي بلجن؟
 
التعديل الأخير بواسطة المشرف:
بخصوص الايموهات أدخل على
menu
plugins
green button
Softcams
بخصوص الكراش يجب ان ترفق الكراش لوجو بدونه لن نستيع المساعدة ...
بخصوص بلجن BA نعم تستطيع تثبيت البلجن عليها ولكن البلجن المعدل من طرفي وليس الأصلي و كذلك تستطيع تثبيت الصورة على الخارجي بواسطة BA
meoboot ليس من اختصاصي عزيزي
 
كود:
omica10 r0.1 %h

]]>
        </imageissue>
    </image>
    <crashlogs>
        <enigma2crashlog>
            <![CDATA[
eable.
not pauseable.
new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x743e0e88
[eEPGCache] remove channel 0x743e0e88
[EPGC] abort caching events !!
allocate channel.. 0190:013e
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11278000 Pol 1 SR 27500000 INV 2 FEC 3 orbpos 130 system 1 modulation 2 pilot 2, rolloff 2
tuning to 1528 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:3315:190:13E:820000:0:0:0:
allocate demux
[SEC] set static current limiting
set sequence pos 3
[SEC] setVoltage 1
[SEC] sleep 20ms
set sequence pos 3
[SEC] invalidate current switch params
[SEC] sendDiseqc: e01038f8(?)
[SEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1, inversion off, m_tuning 2
(0)fe event: status 0, inversion off, m_tuning 3
(0)fe event: status 1f, inversion off, m_tuning 4
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x743e0e88 running
[eEPGCache] channel 0x743e0e88 running
[EPGC] next update in 2 sec
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0bb8), and 1 audio stream(s) (0c81), and the pcr pid is 0bb8, and the text pid is ffffffff
allocate demux
decoder state: play, vpid=3000, apid=3201
DMX_SET_PES_FILTER(0xbb8) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0xc81) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0xbb8) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles page ffffffffffffffff (und)
not pauseable.
not pauseable.
[eDVBCAService] new service 1:0:1:3315:190:13E:820000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:3315:190:13E:820000:0:0:0:
RemovePopup, id = ZapError
[SEC] set dynamic current limiting
PATready
use pmtpid 0435 for service_id 3315
action ->  InfobarChannelSelection switchChannelUp
eventNewProgramInfo 0 0
getResolvedKey config.autolanguage.audio_defaultddp failed !! (Typo??)
have 1 video stream(s) (0bb8), and 19 audio stream(s) (0c81, 0c83, 0c84, 0c85, 0c86, 0c87, 0c89, 0c8a, 0c8b, 0c8c, 0c8d, 0c8e, 0c8f, 0c90, 0c91, 0c93, 0c82, 0c88, 0c92), and the pcr pid is 0bb8, and the text pid is ffffffff
decoder state: play, vpid=3000, apid=3201
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
getResolvedKey config.autolanguage.audio_defaultddp failed !! (Typo??)
[eDVBCIInterfaces] gotPMT
False
False
[eDVBLocalTimerHandler] diff is -1029
[eDVBLocalTimerHandler] no correction found... store calced correction(1029)
[eDVBLocalTimerHandler] not changed
[Dish] tuning failed
False
False
sdt update done!
False
False
[EPGC] start caching events(1427727926)
False
False
False
False
False
False
action ->  OkCancelActions ok
playing 1:0:1:C21:1E78:71:820000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:3315:190:13E:820000:0:0:0:
[eDVBCAService] free service 1:0:1:3315:190:13E:820000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
not pauseable.
not pauseable.
new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x743e0e88
[eEPGCache] remove channel 0x743e0e88
[EPGC] abort caching events !!
allocate channel.. 1e78:0071
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 12265000 Pol 1 SR 27500000 INV 2 FEC 3 orbpos 130 system 1 modulation 2 pilot 2, rolloff 2
tuning to 1665 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:C21:1E78:71:820000:0:0:0:
allocate demux
[SEC] set static current limiting
set sequence pos 3
set sequence pos 7
[SEC] invalidate current switch params
[SEC] sendDiseqc: e01038f9(?)
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1, inversion off, m_tuning 2
(0)fe event: status 1f, inversion off, m_tuning 3
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x743e0e88 running
[eEPGCache] channel 0x743e0e88 running
stop release channel timer
ok ... now we start!!
[EPGC] next update in 2 sec
eventNewProgramInfo 0 0
have 1 video stream(s) (0191), and 1 audio stream(s) (019c), and the pcr pid is 0191, and the text pid is 0c38
allocate demux
decoder state: play, vpid=401, apid=412
DMX_SET_PES_FILTER(0x191) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x19c) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x191) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0xc38) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles page ffffffffffffffff (und)
not pauseable.
not pauseable.
[eDVBCAService] new service 1:0:1:C21:1E78:71:820000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:C21:1E78:71:820000:0:0:0:
RemovePopup, id = ZapError
PATready
use pmtpid 0021 for service_id 0c21
[SEC] set dynamic current limiting
[eDVBLocalTimerHandler] diff is -1028
[eDVBLocalTimerHandler] no correction found... store calced correction(1028)
[eDVBLocalTimerHandler] not changed
eventNewProgramInfo 0 0
getResolvedKey config.autolanguage.audio_defaultddp failed !! (Typo??)
have 1 video stream(s) (0191), and 2 audio stream(s) (019b, 019c), and the pcr pid is 0191, and the text pid is 0c38
decoder state: play, vpid=401, apid=412
getResolvedKey config.autolanguage.audio_defaultddp failed !! (Typo??)
[eDVBCIInterfaces] gotPMT
[Dish] tuning failed
sdt update done!
[EPGC] start caching events(1427727931)
action ->  HotkeyActions exit
unknown action HotkeyActions/exit! typo in keymap?
action ->  InfobarShowHideActions hide
action ->  InfobarChannelSelection switchChannelUp
False
False
False
False
False
False
False
False
False
False
action ->  OkCancelActions ok
playing 1:0:1:C2F:1E78:71:820000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:C21:1E78:71:820000:0:0:0:
[eDVBCAService] free service 1:0:1:C21:1E78:71:820000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
not pauseable.
not pauseable.
not pauseable.
new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:C2F:1E78:71:820000:0:0:0:
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (1001), and 1 audio stream(s) (1011), and the pcr pid is 1001, and the text pid is ffffffff
decoder state: play, vpid=4097, apid=4113
DMX_SET_PES_FILTER(0x1001) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x1011) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x1001) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles page ffffffffffffffff (und)
not pauseable.
not pauseable.
[eDVBCAService] new service 1:0:1:C2F:1E78:71:820000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:C2F:1E78:71:820000:0:0:0:
RemovePopup, id = ZapError
PATready
use pmtpid 0021 for service_id 0c2f
eventNewProgramInfo 0 0
getResolvedKey config.autolanguage.audio_defaultddp failed !! (Typo??)
have 1 video stream(s) (1001), and 2 audio stream(s) (1010, 1011), and the pcr pid is 1001, and the text pid is ffffffff
decoder state: play, vpid=4097, apid=4113
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
getResolvedKey config.autolanguage.audio_defaultddp failed !! (Typo??)
[eDVBCIInterfaces] gotPMT
[Dish] tuning failed
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1427727938)
action ->  HotkeyActions exit
unknown action HotkeyActions/exit! typo in keymap?
action ->  InfobarShowHideActions hide
action ->  InfobarChannelSelection switchChannelUp
False
False
False
False
False
False
False
False
False
False
False
False
False
False
action ->  OkCancelActions cancel
eStaticServiceDVBBouquetInformation::getName failed.. getBouquet failed!
False
False
action ->  GlobalActions volumeDown
Setvolume: 60 60 (raw)
Setvolume: 26 26 (-1db)
setValue 60
action ->  GlobalActions volumeDown
Setvolume: 55 55 (raw)
Setvolume: 29 29 (-1db)
setValue 55
action ->  GlobalActions volumeDown
Setvolume: 50 50 (raw)
Setvolume: 32 32 (-1db)
setValue 50
action ->  GlobalActions volumeDown
Setvolume: 45 45 (raw)
Setvolume: 35 35 (-1db)
setValue 45
action ->  InfobarShowHideActions toggleShow
action ->  InfobarShowHideActions toggleShow
action ->  InfobarShowHideActions toggleShow
action ->  InfobarShowHideActions toggleShow
action ->  InfobarShowHideActions toggleShow
action ->  HotkeyActions exit
unknown action HotkeyActions/exit! typo in keymap?
action ->  InfobarShowHideActions hide
action ->  InfobarChannelSelection switchChannelUp
False
False
action ->  ChannelSelectBaseActions showSatellites
eStaticServiceDVBBouquetInformation::getName failed.. getBouquet failed!
False
True
[ePNG] couldn't open /usr/share/enigma2/skin_default/bouquet.png
False
True
False
True
False
True
False
True
False
True
False
True
action ->  OkCancelActions ok
eStaticServiceDVBBouquetInformation::getName failed.. getBouquet failed!
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
False
action ->  OkCancelActions ok
playing 1:0:1:2:200:2BE:1040000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:C2F:1E78:71:820000:0:0:0:
[eDVBCAService] free service 1:0:1:C2F:1E78:71:820000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
not pauseable.
not pauseable.
new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x743e0e88
[eEPGCache] remove channel 0x743e0e88
[EPGC] abort caching events !!
allocate channel.. 0200:02be
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 11919000 Pol 0 SR 27500000 INV 2 FEC 3 orbpos 260 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1319 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:2:200:2BE:1040000:0:0:0:
allocate demux
[SEC] set static current limiting
[SEC] setTone 0
[SEC] sleep 25ms
[SEC] setVoltage 2
[SEC] sleep 20ms
set sequence pos 3
[SEC] invalidate current switch params
[SEC] sendDiseqc: e01038f7(?)
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1, inversion off, m_tuning 2
(0)fe event: status 1f, inversion off, m_tuning 3
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1f652a8 running
[eEPGCache] channel 0x1f652a8 running
stop release channel timer
ok ... now we start!!
[EPGC] next update in 2 sec
eventNewProgramInfo 0 0
have 1 video stream(s) (0192), and 1 audio stream(s) (025a), and the pcr pid is 0192, and the text pid is ffffffff
allocate demux
decoder state: play, vpid=402, apid=602
DMX_SET_PES_FILTER(0x192) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x25a) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x192) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles page ffffffffffffffff (und)
not pauseable.
not pauseable.
[eDVBCAService] new service 1:0:1:2:200:2BE:1040000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:2:200:2BE:1040000:0:0:0:
RemovePopup, id = ZapError
action ->  HotkeyActions exit
unknown action HotkeyActions/exit! typo in keymap?
action ->  InfobarShowHideActions hide
[eDVBLocalTimerHandler] diff is -966
[eDVBLocalTimerHandler] no correction found... store calced correction(966)
[eDVBLocalTimerHandler] not changed
PATready
use pmtpid 00ca for service_id 0002
eventNewProgramInfo 0 0
getResolvedKey config.autolanguage.audio_defaultddp failed !! (Typo??)
have 1 video stream(s) (0192), and 1 audio stream(s) (025a), and the pcr pid is 0192, and the text pid is ffffffff
decoder state: play, vpid=402, apid=602
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
getResolvedKey config.autolanguage.audio_defaultddp failed !! (Typo??)
[eDVBCIInterfaces] gotPMT
[SEC] set dynamic current limiting
sdt update done!
[Dish] tuning failed
VIDEO_GET_EVENT - ok
action ->  GlobalActions volumeDown
Setvolume: 40 40 (raw)
Setvolume: 38 38 (-1db)
setValue 40
[EPGC] start caching events(1427727968)
action ->  HotkeyActions mainMenu
unknown action HotkeyActions/mainMenu! typo in keymap?
action ->  InfobarMenuActions mainMenu
loading mainmenu XML...
TimerEdit TimerEditList
PluginBrowser PluginBrowser
[DeviceManager] fallback to default translation for: Device Manager
action ->  OkCancelActions ok
okbuttonClick
action ->  MsgBoxActions cancel
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1427727975)
action ->  WizardActions ok
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
  File "/usr/lib/enigma2/python/Screens/PluginBrowser.py", line 104, in save
  File "/usr/lib/enigma2/python/Screens/PluginBrowser.py", line 108, in run
  File "/usr/lib/enigma2/python/Plugins/Extensions/DVDBurn/plugin.py", line 4, in main
  File "/usr/lib/enigma2/python/Plugins/Extensions/DVDBurn/TitleList.py", line 1, in <module>
  File "/usr/lib/enigma2/python/Plugins/Extensions/DVDBurn/DVDProject.py", line 3, in <module>
  File "/usr/lib/enigma2/python/Plugins/Extensions/DVDBurn/DVDTitle.py", line 2, in <module>
  File "/usr/lib/enigma2/python/Plugins/Extensions/DVDBurn/TitleCutter.py", line 1, in <module>
ImportError: No module named CutListEditor.ui
(PyObject_CallObject(<bound method ActionMap.action of <Components.ActionMap.ActionMap instance at 0x1ffa8c8>>,('WizardActions', 'ok')) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
        </enigma2crashlog>
    </crashlogs>
</openpli>
 
المشكلة هي ان الصورة ينقصها ملف
كود:
CutListEditor.ui
تحتاج الى بلجن ذو إصدار اخرى ....
 
ماذا بخصوص barry allen الذي قمتم بتعديله.اين اجده .جهازي dm8000.
 
من فضلك احتاج الی بلجن باري الن من اعدادكم الخاص.مع الشكر الجزيل
 
موجود موضوع مثبت بهذا القسم أخى عن البارى الين
 
أعلى