:

الموضوع في 'الموديلات الصينية Chinese Models' بواسطة winzou, بتاريخ ‏19 نوفمبر 2007.

  1. winzou

    winzou صديق المنتدى

    إنضم إلينا في:
    ‏8 فيفري 2007
    المشاركات:
    7.502
    الإعجابات المتلقاة:
    18.000
      19-11-2007 03:52
    :besmellah2:

    default user code: 1122, 3344, 1234, 5678

    Engineer mode: *#110*01#

    Factory mode: *#987#

    Enable test mode COM port: *#110*01# -> Device Set UART -> PS Config -> UART1/115200

    Restore factory settings: *#987*99#

    LCD contrast: *#369#

    software version: *#800#

    software version: *#900#

    software version: *#300#

    test mode: *#302*20040615#
     
    mino19hd ،SLIMON ،GSMSOFTWAR و 28آخرون معجبون بهذا.
    • 20-01-2008 23:46
    :besmellah1:


    *.::Some Service codes "Chinese" models::.*
    * default user code: 1122, 3344, 1234, 5678
    * Engineer mode: *#110*01#
    * Factory mode: *#987#
    * Enable test mode COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
    * Restore factory settings: *#987*99#
    * LCD contrast: *#369#
    * software version: *#800#
    * software version: *#900#

    Service codes BenQ:

    * software version: *#300#
    * test mode: *#302*20040615#

    Service codes Pantech:

    * software version: *01763*79837#
    * service menu: *01763*476#
    * reset defaults (phone/user code reset to default): *01763*737381#

    Service codes 3xx, 5xx:

    * software version: *#79#
    * software version: *#837#

    Service codes VK200, VK2000, VK2010, VK2020, VK4000:

    * software version: *#79#
    * service menu: *#9998*8336# (hold #)
    * reset defaults (phone/user code reset to default): *#9998*7328# (hold #)

    Service codes LG:

    * software version: 2945#*#

    Service codes Sony-Ericsson:

    * J100 software version: #82#

    Service codes Fly:

    * M100 software version: ####0000#
    * 2040(i) reset defaults: *#987*99# Send
    * MX200 reset defaults: *#987*99# Send
    * MX200 software version: *#900# Send
    * SL300m reset defaults: *#987*99# Send
    * SL300m software version: *#900# Send
    * SL500m reset defaults: *#987*99# Send
    * SL500m software version: *#900# Send
    * MP500 reset defaults: *#987*99# Send
    * MP500 software version: *#900# Send
    * Set language to English: *#0044#
    * Set language to Russian: *#0007#

    Service codes Konka:

    * C926 software version: *320# Send
    * C926 set default language: *#0000# Send
    * C926 set English language: *#0044# Send

    Service codes GStar:

    * GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
    * Set language to English: *#0044#
    * Set language to Russian: *#0007#

    Service codes Motorola

    * Motofone F3 software version: **9999* Send
    * C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
    * C138, C139, C140 software version: #02#*
    * C155, C156, C157 software version: #02#*
    * C257, C261 software version: #02#*
    * V171, V172, V173 software version: #02#*
    * V175, V176, V176 software version: #02#*
    * C168, W220 software version: *#**837#
    * W208, W375 software version: #02#*​





    [​IMG]
    MAHMOOMABARCHA
    .............................................
    TOMORROW IS ANOTHER DAY
     
    17 شخص معجب بهذا.
    • 08-02-2008 21:29
    *#66*# Set Factory Mode CONFIRMED
    *#8375# Show Software Version CONFIRMED
    *#1234# A2DP ACP Mode CONFIRMED
    *#1234# A2DP INT Mode CONFIRMED
    *#0000# + Send : Set Default Language CONFIRMED
    *#0007# + Send : Set Language to Russian CONFIRMED
    *#0033# + Send : Set Language to French CONFIRMED
    *#0034# + Send : Set Language to Spanish CONFIRMED
    *#0039# + Send : Set Language to Italian CONFIRMED
    *#0044# + Send : Set Language to English CONFIRMED
    *#0049# + Send : Set Language to German CONFIRMED
    *#0066# + Send : Set Language to Thai CONFIRMED
    *#0084# + Send : Set Language to Vietnamese CONFIRMED
    *#0966# + Send : Set Language to Arabic CONFIRMED






    resetcodes mobile china
    *#77218114#
    *#881188#
    *#94267357#
    *#9426*357#
    *#19912006#
    *#118811#
    *#3646633#




    CHINESE MODELS:

    default user code: 1122, 3344, 1234, 5678

    Engineer mode: *#110*01#

    Factory mode: *#987#

    Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200

    Restore factory settings: *#987*99#

    LCD contrast: *#369#

    software version: *#800#

    software version: *#900#

    set default language: *#0000# Send

    set English language: *#0044# Send

    set English language (new firmware): *#001# Send





    Service codes BenQ:
    software version: *#300#
    test mode: *#302*20040615#

    Service codes Pantech:
    software version: *01763*79837#
    service menu: *01763*476#
    reset defaults (phone/user code reset to default): *01763*737381#

    Service codes 3xx, 5xx:
    software version: *#79#
    software version: *#837#
    Service codes VK200, VK2000, VK2010, VK2020, VK4000:
    software version: *#79#
    service menu: *#9998*8336# (hold #)
    reset defaults (phone/user code reset to default): *#9998*7328# (hold #)

    Service codes LG:
    software version: 2945#*#

    Service codes Sony-Ericsson:
    J100 software version: #82#

    Service codes Fly:
    2040(i) reset defaults: *#987*99# Send
    MX200 reset defaults: *#987*99# Send
    MX200 software version: *#900# Send
    SL300m reset defaults: *#987*99# Send
    SL300m software version: *#900# Send
    SL500m reset defaults: *#987*99# Send
    SL500m software version: *#900# Send
    MP500 reset defaults: *#987*99# Send
    MP500 software version: *#900# Send
    Set language to English: *#0044#
    Set language to Russian: *#0007#




    Service codes Konka:
    C926 software version: *320# Send
    C926 set default language: *#0000# Send
    C926 set English language: *#0044# Send

    Service codes GStar:
    GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
    Set language to English: *#0044#
    Set language to Russian: *#0007#

    ZTE Mobile:>1- *938*737381#
    2- PHONE WILL DIPLAYED DONE
    3- POWER OFF YOUR PHONE AND POWER ON AGAIN
    alcatel:>E205
    unlocking phone code,only press***847# without simcard



    E900 software version: *#5002*8376263#
    E900 full reset: *2767*3855#
    Service codes Spice:
    S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200
    S410 engineer mode: *#3646633#
    S900 software version: *#8375#
    S900 serial no: *#33778#
    Service codes Philips:
    S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200

    Service codes "Chinese" models:
    default user code: 1122, 3344, 1234, 5678
    Engineer mode: *#110*01#
    Factory mode: *#987#
    Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
    Restore factory settings: *#987*99#
    LCD contrast: *#369#
    software version: *#800#
    software version: *#900#

    Service codes BenQ:
    software version: *#300#
    test mode: *#302*20040615#

    Service codes Pantech:
    software version: *01763*79837#
    service menu: *01763*476#
    reset defaults (phone/user code reset to default): *01763*737381#
    Service codes VK-Mobile 3xx, 5xx:
    software version: *#79#
    software version: *#837#
    service menu: *#85*364# (hold #)
    Service codes VK200, VK2000, VK2010, VK2020, VK4000:
    software version: *#79#
    service menu: *#9998*8336# (hold #)
    reset defaults (phone/user code reset to default): *#9998*7328# (hold #)






    Service codes LG:
    software version: 2945#*#
    KG300 NVRAM format: 2945#*# -> menu 15

    Service codes Sony-Ericsson:
    J100 software version: #82#

    Service codes Fly:
    M100 software version: ####0000#
    2040(i) reset defaults: *#987*99# Send
    MX200 reset defaults: *#987*99# Send
    MX200 software version: *#900# Send
    SL300m reset defaults: *#987*99# Send
    SL300m software version: *#900# Send
    SL500m reset defaults: *#987*99# Send
    SL500m software version: *#900# Send
    MP500 reset defaults: *#987*99# Send
    MP500 software version: *#900# Send
    Set language to English: *#0044#
    Set language to Russian: *#0007#

    Service codes Konka:
    C926 software version: *320# Send
    C926 set default language: *#0000# Send
    C926 set English language: *#0044# Send

    Service codes GStar:
    GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
    Set language to English: *#0044#
    Set language to Russian: *#0007#

    Service codes Motofone-F3:
    Motofone F3 software version: **9999* Send
    ***300* Set SIM Pin
    ***310* / ***311* SIM Pin ON | OFF
    ***000* Reset Factory settings
    ***644* Set Voicemail number
    ***260* / ***261* Auto keypad lock ON | OFF
    ***510* / ***511* Voice Prompts ON | OFF
    ***160* / ***161* Restricted Calling (Phonebook only) ON | OFF
    ***200608* Send: software version
    ***200606* Send: software version
    ***200806* Send: flex version
    ***250* / ***251* Keypad tones ON | OFF
    ***470* Select time format
    ***500* /***501* Prepaid Balance Display ON | OFF
    ***520* Change language

    Service codes Motorola:
    C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
    C138, C139, C140 software version: #02#*
    C155, C156, C157 software version: #02#*
    C257, C261 software version: #02#*
    V171, V172, V173 software version: #02#*
    V175, V176, V176 software version: #02#*
    C168, W220 software version: *#**837#
    W208, W375 software version: #02#*
    and "yes"''







    -mobile Inno30, 55, 89, 90, 99, 100, A10, A20, P10, Vk200
    - Set full factory *741*737381#
    - Set full factory *741*7373868#
    - Set full factory *741*2878#
    - Set Engineer Mode *888*888#
    - Check software version *888*837#
    I-mobile 100 ,200 , 313
    - Check software version #*888#
    I-mobile 309, 310
    - Check software version *0*4636#
    - Test Mode *0*6268#
    I-mobile 311
    - Check software version #*878#
    I-mobile 511
    - Check software version *1222*1#
    I-mobile 301, 302,308, 508, 601, 602, 603, 604, 606, 611, 901, 902
    - Check software version *#159#
    - Set Factory Mode *#32787#
    - Set Engineer Mode *#3646633#

    I-mobile 503, 506, 605, 600, 607, 608
    - Set Engineer Mode ***503#
    - Set Factory Mode ***504#
    - Set Auto Test ***505#
    I-mobile 509, 612
    - Set Factory Mode *#66*#
    I-mobile 504, 505, 803
    - Check software version *68*48#
    - Set full factory *789#
    - Test Mode *#789#
    I-mobile 305, 306, 315, 510, 609, 609i,516
    - Check software version *#8375#
    - Set Factory Mode 878
    I-mobile 610
    - Check software version *#22#
    I-mobile J101, J102
    - Test Mode *23638777*783781#
    I-mobile 502, 502i, 505, k9, 802
    - Check software version *201206*4636#
     
    13 شخص معجب بهذا.
  2. fizawi

    fizawi عضو جديد

    إنضم إلينا في:
    ‏18 نوفمبر 2005
    المشاركات:
    8
    الإعجابات المتلقاة:
    2
      12-02-2008 16:52
    code pour formate nokia n82 china meci d'avance
    merci pour le forum
    mes freres quand je mis la carte sim il etteind puis s'allume tout seul
     
  3. fizawi

    fizawi عضو جديد

    إنضم إلينا في:
    ‏18 نوفمبر 2005
    المشاركات:
    8
    الإعجابات المتلقاة:
    2
      12-02-2008 18:18
    ca marche pas mon frere
    meci pour la repence ya t'il un autre solution aider moi
    svp merci beaucoup
     
    1 person likes this.
  4. fizawi

    fizawi عضو جديد

    إنضم إلينا في:
    ‏18 نوفمبر 2005
    المشاركات:
    8
    الإعجابات المتلقاة:
    2
      15-02-2008 19:53
    merci mon frere pour la repence
    maleuresement ne marche pas ce code
    cherche moi un autre code svp
    merci beaucoup
    mon mobile est n82 china deux carte sim et merci un autre fois
     
    1 person likes this.

مشاركة هذه الصفحة

جاري تحميل الصفحة...