1. عرض جديد خاص بالإشتراك في سيرفر الأحلام و IPTV

كيف تغيرsettingslist الدريم بوكس الىsettingslist الريلوك

الموضوع في 'باقي اجهزة اللنوكس' بواسطة Rambo, بتاريخ ‏31 أوت 2006.

حالة الموضوع:
مغلق
  1. Rambo

    Rambo كبار الشخصيات

    إنضم إلينا في:
    ‏19 نوفمبر 2005
    المشاركات:
    1.556
    الإعجابات المتلقاة:
    126
      31-08-2006 14:26
    Until things are streamlined this is a trial and error job….



    Recipe

    Ingredients:

    • One dreambox settingslist (enigma)

    • One relook settingslist

    • The latest version of Channelmaster

    • The latest version of JonDoe's Relook editor





    Step 1

    - Open channelmaster

    - Import your dreamboxsettingslist into channelmaster

    - Delete all satellites you won't use

    - In left window, select satellites, right click mouse, select: remove duplicated channels, do it on all three options. Unfortunately duplicate transponders are not removed, to do that you do the following:

    Select File>export>DGStation. If you are lucky you can export immediately, but I'm sure you're not Channelmaster will be nagging there are duplicate transponders found, so you have to delete them. Depending on how many are found, this can be a time consuming and boring job (most dreamboxsettings are messy…)

    After a while Channelmaster has finally agreed you can export the settingslist into a relook list.

    BUT it needs a relookchannellist before you can export properly ( because of the difference between satellite setup), so choose your relooksettingslist (with proper satellite/disecq setup)

    Channelmaster is creating a relook .dat file.



    Step 2

    Open Jondoe's settingseditor

    Select the created .dat file, open it

    Select LNB settings (left pane)

    Double click on LNB1

    Local freq. is set to 0, double click on UNIV_LNB, set local freq to 9750/10600 (for Europe, NA may need other settings), set 22khz to auto, choose your disecq-type/number ( will probably be OK already because of the selected relooksettings you imported, while exporting the channelmasters settings into relook settings, but you can change it as you like)

    Repeat this for all LNB's

    Save the file (normally this will be database 1.10 which is ok.)

    And you are ready to put the file into the relook… ​
    سأقوم بترجمته إلى العربية عندما يكون لي متسع من الوقت
    مع أجمل تحياتي :kiss:
     

حالة الموضوع:
مغلق

مشاركة هذه الصفحة

جاري تحميل الصفحة...