حصريا حكايات كمان وحكايات زمان على النايل سات ابتداء من الي

إنضم
21 ديسمبر 2007
المشاركات
330
مستوى التفاعل
33
السلام عليكم

اليوم 11\2

سيتم اعادة ترتيب قنوات التردد 12034 على النايل سات

مع اضافة قناتين وهما حكايات كمان وحكايات زمان

المصدر موقع artonline

http://www.artonline.tv/ART/LineUp.aspx
إعادة ضبط قنوات ART bouquet على UEC 900z, zi, z3 , 725 and Humax IR-ACE

سيتم ابتداء من 11 فبراير إعادة ضبط وتغيير ترتيب قنوات ART على "التراسبوندر" 12034. يبين الجدول التالي ترتيب القنوات الحالية وتلك بعد التغيير متوفرة فقط لأجهزة الاستقبال (UEC and Humax IR-ACE decoders).
لإعادة تحديث ترتيب القنوات على أجهزة (UEC و Humax IR- ACE) تحتاج فقط إلى إعادة تشغيل من الطاقة الكهربائية، اقطع التيار وشغل من جديد. إذا لم يتم التحديث بعد هذه العملية فلا بد من العملية اليدوية. أما بالنسبة للأجهزة الأخرى فالعملية اليدوية لإعادة ترتيب القنوات مطلوبة كما هو مبين أدناه.

LINE UP OF ART BOUQUET ON UEC 900z, zi, z3 , 725 and Humax IR-ACE

The channels line up of the transponder 12034 will be changed. The current and the new line up of the ART bouquet (Bouquets available only on UEC and Humax IR-ACE decoders) are as below. To update the channel order on UEC and Humax IR- ACE, only a power reboot is required. If it is not updated after a power reboot, a retuning has to be done. For the decoders other than UEC and Humax IR-Ace, a retuning is required to update the channel list.


Current line up New Line up ART bouquet slot
EIN Iqraa 15
Hekayat EIN 16
Hekayat 2 Teenz 17
TeenZ Hekayat 18
Aflam 1 Hekayat Kaman 19
Aflam 2 Hekayat Zaman 20
Cinema Aflam 1 21
Tarab Aflam 2 22
ART MW Cinema 23
Iqraa ART MW 24
Jordan Tarab 25
Future TV Jordan 26
BNTV BNTV 27
JSC JSC 28
Melody Aflam Melody Aflam 29


تعليمات إعادة ضبط القنوات

UEC 700
Press MENU.
Select Advanced Options, Press OK.
Select Change Dish installation, Press OK
Key in the Pin code 9949.
Select Tune IRD, Press OK.
اضغط القائمة MENU
اختر Advanced Options ثم اضغط OK
اختر Change Dish installation ثم اضغط OK
ادخل الرمز الرقمي 9949
اختر Tune IRD ثم اضغط OK


UEC 900 z,zi,z3,725
Press Menu
Select Advanced Options and Press OK.
Key in Pincode 9949.
Select Scan All Networks and Press OK.
اضغط القائمة MENU
اختر Advanced Options ثم اضغط OK
ادخل الرمز الرقمي 9949
اختر Scan All Networks ثم اضغط OK


Eurobox 9200
Press Menu
Select Change Dish Installation, Press OK.
Key in the pin “9949”.
Select Auto scan, Press OK.
Select the satellite Nilesat101 using the Down and Up arrow and Press OK. اضغط القائمة MENU
اختر Change Dish installation ثم اضغط OK
ادخل الرمز الرقمي 9949
اختر Auto scan ثم اضغط OK
اختر قمر Nilesat101 بمفاتيح الأسهم الأعلى والأسفل ثم اضغط OK


TECHNOSAT IR-7000
Press MENU
Press Right arrow key to select Installation.
Press Down arrow key to select Manual Search and Press OK
If it asks for the Pin code key in ‘0000’
Select TP and Press the Right Arrow until the FRQUENCY shown is 12034
Press Down arrow key to select Network search.
Press Right arrow key to make it YES.
Press Down arrow to select SEARCH TP and Press OK
Select the Option: ALL and Press OK. اضغط القائمة MENU
اضغط مفتاح اليمين لاختيار installation
اضغط مفتاح الأسفل لاختيار Manual Search ثم اضغط OK
إذا سئلت عن الرمز الرقمي 0000
اختر TP ثم اضغط مفتاح الأيمن حتى يصل التردد FRQUENCY إلى 12034
اضغط مفتاح الأسفل لاختيار Network search
اضغط مفتاح اليمين لاختيار YES
اضغط مفتاح الأسفل لاختيار SEARCH TP ثم اضغط OK
اختر ALL ثم اضغط OK


ALFAGOLD AD9500
Press Menu.
Press the Right arrow to select System Installation.
Scroll to Automatic search, Press OK.
Press OK on the prompt 'Do you want to start Automatic search".
Once finished it will show the message “Automatic search ended”
Press Exit 4 times. اضغط القائمة MENU
اضغط مفتاح اليمين لاختيار System Installation
انزل في القائمة إلى Automatic search ثم اضغط OK
عندما تظهر لك عبارة ' Do you want to start Automatic search اضغط OK
عند الانتهاء من عملية الضبط ستظهر لك عبارة “Automatic search ended”
اضغط Exit 4 مرات


Humax IR ACE SII (software version HFSIR 1.00.07 )
Press Menu
Select Installation and press OK
Enter pin code 1234
Select Manual Search and press OK
Select Transponder
Press right arrow and select 12033 (H), 27500, 3/4 and press OK
Select Network Search
Press right arrow and select Enable
Select Search and press OK
After the tuning is completed press OK on SAVE. اضغط القائمة MENU
اختر installation ثم اضغط OK
ادخل الرمز الرقمي 1234
اختر Manual Search ثم اضغط OK
اختر Transponder
اضغط مفتاح اليمين لاختيار 12033 (H), 27500, ¾ ثم اضغط OK
اختر Network Search
اضغط مفتاح اليمين واختر Enable
اختر Search ثم اضغط OK
بعد إتمام عملية الضبط، قم بتخزين التغيرات الجديدة بضغط مفتاح مفتاح OK عند التخزين SAVE​
 
أش دخلنا في ART. كي نكسروا شفرتها أتوا نتلهاو بها.
 
أعلى