يلا يا شباب كل انواع الموبايلات بكل الاكواد اللي نفسك تلاقيها

الموضوع في 'صيانة الجوال' بواسطة LuNe, بتاريخ ‏3 جانفي 2006.

حالة الموضوع:
مغلق
  1. LuNe

    LuNe صديق المنتدى

    إنضم إلينا في:
    ‏1 جانفي 2006
    المشاركات:
    3.048
    الإعجابات المتلقاة:
    6.782
      03-01-2006 16:50
    Secret GSM Codes:
    Alcatel
    Bosch
    Ericsson

    Motorola
    Nokia
    Philips

    Panasonic
    Sagem
    Samsung

    Siemens
    Sony

    The following codes are the standard GSM codes for various services. Not all codes are functioning in all nets. It depends on what the operators have included in their software. Most Nokia phones have easier ways to activate these codes through the menus, check the guides for your model.
    Some characters explained : *ACTIVATE
    **REGISTER AND ACTIVATE
    *#CHECK STATUS
    #UNREGISTER
    ##UNREGISTER AND DEACTIVATE
    Codes :

    To check the IMEI (International Mobile Equipment Identity) type *#06#
    Information you get from the IMEI :
    XXXXXX XX XXXXXX X
    TAC FAC SNR SP
    TAC = Type approval code
    FAC = Final assembly code
    SNR = Serial number
    SP = Spare

    Press *#000000# to enter Service Menu

    To view Secret Menu type 000000 then press *

    Secret Menu Appears

    TRACES - Channel indicator menus
    ARRETS - I Dunno
    VIDER ARRETS - Press OK and the phone responds: This action is executed!
    CTRL CHARGE - It shows the charger voltage and battery voltage.
    DAMIER - Display TestEFR : to activate *3370#
    to deactivate #3370#

    HR : to activate *4720#
    to deactivate #4720#

    Talk time is reduced by 5% if Enhanced Full Rate is active, and increased by up to 30% if Half Rate is active.

    To cancel all diverting : ##002#Call Diverting
    All
    To Activate: * * 21 * NUMBER # [SEND]
    To Cancel: # # 21 # [SEND]
    To Check: * # 21 # [SEND]
    No Answer
    To Activate: * * 61 * NUMBER # [SEND]
    To Cancel: # # 61 # [SEND]
    To Check: * # 61 # [SEND]
    Unreachable
    To Activate: * * 62 * NUMBER # [SEND]
    To Cancel: # # 62 # [SEND]
    To Check: * # 62 # [SEND]
    Busy
    To Activate: * * 67 * NUMBER # [SEND]
    To Cancel: # # 67 # [SEND]
    To Check: * # 67 # [SEND]
    To Cancel All Call Forwarding # # 002 # [SEND]
    Diverting Data Calls
    All
    To Activate: * * 21 * NUMBER * 25 # [SEND]
    To Cancel: # # 21 # * 25 [SEND]
    To Check Status: * # 21 # * 25 # [SEND]
    No Answer
    To Activate: * * 61 * NUMBER * 25 # [SEND]
    To Cancel: # # 61 * 25 # [SEND]
    To Check Status: * # 61 # * 25 # [SEND]
    Unreachable
    To Activate: * * 62 * NUMBER * 25 # [SEND]
    To Cancel: # # 62 # * 25 # [SEND]
    To Check Status: * # 62 # * 25 # [SEND]
    Busy
    To Activate: * * 67 * NUMBER * 25 # [SEND]
    To Cancel: # # 67 # * 25 # [SEND]
    To Check Status: * # 67 # * 25 # [SEND]
    Diverting Fax Calls
    All
    To Activate: * * 21 * NUMBER * 13 #[SEND]
    To Cancel: # # 21 # * 13 # [SEND]
    To Check Status: * # 21 # * 13 # [SEND]
    No Answer
    To Activate: * * 61 * NUMBER * 13 # [SEND]
    To Cancel: # # 61 * 13 # [SEND]
    To Check Status: * # 61 # * 13 # [SEND]
    Unreachable
    To Activate: * * 62 * NUMBER * 13 # [SEND]
    To Cancel: # # 62 # * 13 # [SEND]
    To Check Status: * # 62 # * 13 # [SEND]
    Busy
    To Activate: * * 67 * NUMBER * 13 # [SEND]
    To Cancel: # # 67 # * 13 # [SEND]
    To Check Status: * # 67 # * 13 #[SEND]
    Call Barring
    Before you can activate these barring services you will need a barring code from your service provider.
    Call Barring can not be activated if Call Forwarding diverts are already in use.

    All Calls
    To Activate: * 330 * BARRING CODE # [SEND]
    To Cancel: # 330 * BARRING CODE # [SEND]
    To Check: * # 330 # [SEND]
    All Outgoing Calls
    To Activate: * 333 * BARRING CODE # [SEND]
    To Cancel: # 333 * BARRING CODE # [SEND]
    To Check: * # 333 # [SEND]
    All Incoming Calls
    To Activate: * 353 * BARRING CODE # [SEND]
    To Cancel: # 353 * BARRING CODE # [SEND]
    To Check: * # 353 # [SEND]
    All Outgoing Calls
    To Activate: * 33 * BARRING CODE# [SEND]
    To Cancel: # 33 * BARRING CODE # [SEND]
    To Check: * # 33 # [SEND]
    All Outgoing International Calls
    To Activate: * 331 * BARRING CODE# [SEND]
    To Cancel: # 331 * BARRING CODE # [SEND]
    To Check: * # 331 # [SEND]
    All Outgoing International Calls Except To Home Country
    To Activate: * 332 * BARRING CODE# [SEND]
    To Cancel: # 332 * BARRING CODE # [SEND]
    To Check: * # 332 # [SEND]
    All Incoming Calls
    To Activate: * 35 * BARRING CODE # [SEND]
    To Cancel: # 35 * BARRING CODE # [SEND]
    To Check: * # 35 # [SEND]
    All Incoming Calls When Outside Home Country
    To Activate: * 351 * BARRING CODE # [SEND]
    To Cancel: # 351 * BARRING CODE # [SEND]
    To Check: * # 351 # [SEND]
    Cancelling All Call Barring # 330 * BARRING CODE # [SEND]
    SMS
    Bar Incoming SMS Messages
    To Activate: * 35 * BARRING CODE* 16 # [SEND]
    To Cancel: # 35 * BARRING CODE* 16 # [SEND]
    Call Waiting
    To Activate: * 43 # [SEND]
    To Cancel: # 43 # [SEND]
    To Check: * # 43 # [SEND]
    Calling Line Identity
    Outgoing
    To Activate: * 31 # [SEND]
    To Cancel: # 31 # [SEND]
    To Check: * # 31 # [SEND]
    Incoming
    To Activate: * 30 # [SEND]
    To Cancel: # 30 # [SEND]
    To Check: * # 30 # [SEND]

    Siemens Secret GSM Codes
    SP unlock : *#0003*(secret code 8 digits)#
    if you lost your security code, you can get a 8-digit number from your siemens hotline, which will delete the security code
    Show IMEI code: *#06#
    Reset to factory defaults: *#9999# (does not change settings on your sim card or in your network)
    5 x "no catch": (remove sim card first)
    *#0606# + left softkey -> <number>
    possibly for sp lock: to allow further inputs
    !providername on your display:
    the ! means: transmission is unencrypted
    pay attention
    Resets language to automatic selection:*#0000# then green button
    Resets language to english:*#0001# then green button(useful, if you changed to a language you don't understand)
    How to distinguish a c25 from a c25 power:
    c25 handys have firmware versions:
    5,8,10,12
    c25 power handys have firmware versions:
    (41?),43,46
    In most cases, c25 power handys also have an isolated "P" on the sticker under the accu...go on reading..
    Show your firmware revision:
    switch off your handy, remove your sim card,
    switch on again and enter *#06# and then
    press the left display button,
    it will show you something like 12/XX/XX,
    where 12 is your version
    actual version C25: 12
    actual version C25 Power: 46









    Nokia Secret GSM Codes
    To check the IMEI (International Mobile Equipment Identity) type *#06#
    Information you get from the IMEI :
    XXXXXX XX XXXXXX X
    TAC FAC SNR SPTAC = Type approval code
    FAC = Final assembly code
    SNR = Serial number
    SP = SpareTo check the phones software revision type *#0000#
    Information you get from the software revision :
    V 05.31
    18-02-99
    NSE-3
    -1st line = software revision-2nd line = the date of the software release
    -3rd line = phone type(generation)
    TO ENTER THE SERVICE MENU type *#92702689# (*#WAROANTY#)-Serial number IMEI
    -Production date(MM/YY)
    -Purchase date (MM/YY) You can only enter the date once.
    -Date of last repair (0000=No repair)-Transfer user data to another Nokia phone via infra red
    NOKIA 1610/1611
    *#170602112302# show the software version
    NOKIA 2110
    *#3283# phone information
    for 2110i *#170602112302# or *#9999# to see the software version
    for 2110 *#682371158412125# to see the software version
    NOKIA 3110
    *#7780# make a reset
    *#3110# to see the software version
    *#92702689# to enter the secret menu
    NOKIA 5110
    *#0000# show the software version
    *#92702689# to enter the secret menu
    NOKIA 6110/6150
    *#0000# show the software version
    *#92702689# to enter the secret menu
    NOKIA 8110/8210/8810
    *#0000# show the software versionLatest versions:
    Nokia 1610 NHE-5NX 5,23
    Nokia 1611 NHE-5SX 4,05
    Nokia 2010 NHE-3 5,12
    Nokia 2110 NHE-1 4,97m
    Nokia 2110i/2118 NHE-4 5,70
    Nokia 3110 NHE-8 8,50
    Nokia 3210 NSE-8/9 5,01
    Nokia 5110 NSE-1 5,24
    Nokia 6080 NME-2 4,80
    Nokia 6081 NME-2A 5,14
    Nokia 6090 NSM-3 4,10
    Nokia 6110 NSE-3 5,48
    Nokia 6150 NSM-1 5,22
    Nokia 7110 NSE-5 4,73
    Nokia 8110 NHE-6BX 6,21
    Nokia 8110i NHE-6BM 5,20
    Nokia 8210 NSM-3 5,16
    Nokia 8810 NSE-6 5,00
    Nokia 8850 NSM-2 5,11
    Nokia 9110 RAE-2 5,02 / 4,15
    *#921702689# to enter the secret menu

    Motorola Secret GSM Codes
    MOTOROLA 6200/7500/8200/8400/8700 Secrets
    To activate RBS (Engineering Menus):

    [pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]
    (pause means the * key held in until box appears)
    You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the < or > keys, and enable it.

    To de-activate RBS (Engineering Menus):

    [pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]
    (pause means the * key held in until box appears)
    Works on 6200's,8200's,1-888's,7500's,8400's and GSM StarTacs with later than version .27 software.

    Options under Eng Field Options

    Eng Field Options

    Active Cell

    RxLev -55 Received powerlevel in dBm
    NCC 0 National Colour Code, used for identifying channel
    BCC 7 Broadcast Colour Code, also for identifying purposes
    MSTxPwr 35 Max allowed transmit power 35dBm about 3.2W
    C1 003 Is a calculated figure for the quality control signal which is constantly sent out from the RBS quality
    the signal returning from the phone has. If this value is negative for more than 5 sec then the system will make a cell switch.
    Time Adv xxx xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.




    __________________
     
    أعجب بهذه المشاركة kristeaux
  2. LuNe

    LuNe صديق المنتدى

    إنضم إلينا في:
    ‏1 جانفي 2006
    المشاركات:
    3.048
    الإعجابات المتلقاة:
    6.782
      03-01-2006 16:52
    Adjacent Cells

    Adj Cell 1
    Channel 0033 Channel Number
    RxLev -65 Received powerlevel in dBm
    BCCH Decode I think it means it is able to decode the channel information contained in the BCCH
    RxLevAM -104 Min allowed reception, compare with RxLev -65 and you get the C1 value which is 39 and
    reported back to base as measure of field strength.
    MTxPwr 35 Aain max allowed powerlevel
    C1 003 ??
    NCC 0 National Colour Code
    BCC 6 Broadcast Colour Code

    System Parameters

    Combined Off ??
    AcsClas 0000 Allows different priorities - this network doesn't support it.
    MCC 505 Mobile Country Code, 505 for Australia, 240 for Swedes etc
    MNC 01 Mobile Network Code, 01 for Mobilenet, 02 for Optus, 03 for Vodafone using MCC 505. MCC+MNC is often called Network Code
    LAC 08720 Location Area Code, shows which exchange your're in
    CellID 00473 Base Station Identity
    T3212 005 Time between periodic network updates (either hours between or time remaing until update, not sure)
    BS-PA-MFRM 4 ??
    XZQTY 14.3 ??


    Motorola Flip Pinout:
    ANT- (O) | | | | | | | | | |
    10 9 8 7 6 5 4 3 2 1
    Top of phone (screen)

    1) Audio Ground
    2) Ext b+
    3) T Data
    4) C Data
    5) R Data
    6) Logic Ground
    7) Audio Out - on/off
    8) Audio In
    9) Manual Test
    10) Battery Feedback

    Sony Secret GSM Codes
    Sony CMD-Z 1

    Press *#06# to view IMEI

    Show Software version and manufacturing date : Press # 8377466 # (#version#)

    Sony CMDX 1000

    Show Software date : Remove your SIM Card, then press : * # 06 #
    and finally press:
    [left softkey]
    To enter Monitor Mode on Network Option menu:
    Menu
    9 (Phone Options)
    7 (Phone Status)
    [Left Display Button] (left MENU key) 7684666 [HangUp Button] (Red HandSet key)

    Ericsson Secret GSM Codes
    Ericsson 628
    To view IMEI number enter * # 0 6 #

    To view Software Version enter -> * <- <- * <- *

    To read all programmed texts enter -> * <- <- * <- * ->

    To view phone network lock status enter < * * < (wait 3 sec)

    To fast dial press phone number pos nr and # (Example: 1 5 #)

    To fast dial last number press 0 #

    To reset main menu language to english enter * # 0 0 0 0 #

    To see battery level while phone is turned off quickly press and release on/off(NO button).

    To see Extended menus (on older versions) go to MISSED CALLS, empty directory, press and HOLD right arrow button, choose menu type

    To see Extended menus (on newer versions) go to READ, empty directory, press and HOLD left arrow button, choose menu type

    To edit phone book Turn on extended menus and choose "EditPh.Bk".Command set
    The following commands are recongnized by the phone.Use 9600 baud, 1 stopbit, 8 data bits, no parity.

    ATA Pick up phone during ring
    AT+GMI Manufacturer identification
    AT+GMO Request model Identification
    AT+GMR Request revision Identification
    AT+GMM
    ATDxxx; Dial number xxx
    ATH Hangup phone
    AT+CFUN=? Define levels of fuctionality in the order of power consumed
    AT+CFUN=0 Switches off the phone
    AT+CBC Query battery level
    Each command has to be followed by a 0x0A, 0x0D sequence, that is carriage return - line feed.
    These commands will be ackowledged with an 'OK' prompt. An
    incoming call is signalled by the string 'RING' sent by the phone at 9600b in normal mode.
    Portable Handsfree Unit
    1 Earphone: 16 Ohm
    2 Microphone: <- 2 kOhm
    5 Connected to 04 (GND)
    Ericsson 688
    To view IMEI number *#06#
    To view Software Version enter -> * <- <- * <- * CLR
    To reset phone language to English *#0000#
    >*<<*<*> 1-row text strings. If pressing YES you can check the phones 1-row text programming in currently selected language.

    >*<<*<*>> n-row text strings. If pressing YES you can check the phones n-row text programming in currently selected language.
    Ericsson 788To view IMEI number *#06#
    To view Software Version enter * -> * <- <- * <- *
    Service Provider Lock is * <- <- * but it is now called the ME lock.
    There are two options after selecting yes on another menu. These are lock to Network or lock to NetSubet.
    Command set
    The following commands are recongnized by the phone.Use 9600 baud, 1 stopbit, 8 data bits, no parity.

    ATA Pick up phone during ring
    AT+GMI Manufacturer identification
    AT+GMO Request model Identification
    AT+GMR Request revision Identification
    AT+GMM
    ATDxxx; Dial number xxx
    ATH Hangup phone
    AT+CFUN=? Define levels of fuctionality in the order of power consumed
    AT+CFUN=0 Switches off the phone
    AT+CBC Query battery level

    Each command has to be followed by a 0x0A, 0x0D sequence, that is carriage return - line feed.
    These commands will be ackowledged with an 'OK' prompt. An
    incoming call is signalled by the string 'RING' sent by the phone at 9600b in normal mode.
    Portable Handsfree Unit
    1 Earphone: 16 Ohm
    2 Microphone: <- 2 kOhm
    5 Connected to 04 (GND)
    Ericsson 888
    To view IMEI number *#06#
    To view Software Version enter * -> * <- <- * <- *
    Note: This code also shows version of Infrared driver software and text labels




    Panasonic Secret GSM Codes
    GD 90 :
    press *#9999 in the 10 sec after the pincode to see the software version.
    Samsung Secret GSM Codes
    enter *#9999# to see the software version
    enter *#0001# to see parameters.enter *

    #9999# to see the software version
    enter *#9125# to activate the smiley when the phone is charging
    enter *#0837# instruction for the serial paramaters.
    enter *#9998*228# to see battery informations.(capacity - voltage - temperature )
    enter *#9998*246# to see the software status
    enter *#9998*289# to change buzzer frequency
    enter *#9998*364# to have the dog watch
    enter *#9998*523# to change the contrast
    enter *#9998*872# to have a diagnostic
    enter *#9998*842# to make a vibrator test
    enter *#9998*947# to make a reset (fatal error)
    enter *#9998*9999# software version
    enter *2767*2878# to make choice between the reset options

    Alcatel Secret GSM Codes
    One touch easy :to enter the service menu : *#000000#
    All Alcatels :
    to enter the secret menu : 000000*
    TRACES : channel indicator menu
    ARRETS : phone error
    CLEAR ARRETS : press ok and the phone responds "this action is executed"
    CTRL CHARGE : it shows the charger voltage and battery voltage
    DAMIER : display test (except for Alcatel On Touch Pocket
    Philips Secret GSM Codes
    Philips DIGA phones:

    Blocking list *#3333*#
    Time connected *#2558*#
    Flags,something *#3377*#
    Security code *#7489*#

    Philips FIZZ phones:

    IMEI code *#06#
    SW info *#8377*#
    Security code *#1234*#

    Philips SPARK phones:

    IMEI: *#06#

    Philips GENIE phones:

    *#06# IMEI number
    *#2254*# Status register: C, BS, RR, MMI, CREAT.
    *#2255*# activate and deactivate the "DEBUG CALL"-Mode; when activated, make a call
    to a busy line an the phone will display some hex-codes on the display
    *#2558*# the time in days,hours and minutes you are connected to the net
    *#2562*# not clear; the phone reconnects to the net
    *#2565*# not clear; warmstart
    *#3333*# (NO) BLOCKING - list (15 items)
    *#2377*# "BEER": not clear, the phone waits a random time and reconnects to the net
    *#3377*# Init, Flags, SIM LCK
    *#3353*# resets the (NO) BLOCKING - list
    *#7378*# Name, Length, SIM phase
    *#7489*# SECURITY CODE
    *#7693*# activate and deactivate the SLEEP MODE (when deactivated the battery will go down!)
    *#7787*# SPURIOUS INTERRUPT
    *#7948*# SWITCH OFF
    *#8463*# Some information about the SLEEP MODE: Wake, Sleep Req., Sleep

    show info *#8377*#security code *#1234*#

    Sagem Secret GSM Codes
    press MENU - 5 - 1 - 1 - # to enter the secret menu
     
  3. LuNe

    LuNe صديق المنتدى

    إنضم إلينا في:
    ‏1 جانفي 2006
    المشاركات:
    3.048
    الإعجابات المتلقاة:
    6.782
      03-01-2006 16:54
    Bosch Secret GSM Codes
    Bosch 738 and Bosch 718, Bosch COM 607 and 908 Secrets
    Codes:

    *#06# to display the IMEI
    *#0000# to set the language automaticaly (To english)Reset
    *#3370# to set the Enhaced Full Rate
    #3370# to Reset the phone
    *#9000# to enter sim lock code
    *#9003# to enter the network code
    *#9004# to enter the subset code
    *#9100# to remove the sim lock permanently
    *#9101# to remove the corporate lock permanently
    *#9102# to remove the provider lock permanently
    *#9103# to remove the network lock permanently
    *#9104# to remove the subset lock permanently

    Reveal Engineering Menu

    Press *#3262255*8378# (equivalent to *#DANCALL*TEST#) to make secret Engineering menu
    (Menu 10) appear.
    Then you will be able to see the following information.

    10. Engineering
    10.1 MS Info
    10.1.1 on
    10.1.2 off
    10.2 Software details
    10.2.1 Software version
    10.2.2 EEPROM version
    10.2 Test / Production details
    10.3.1 Hardware data
    10.3.2 Production data
    10.3.3 Service data
    10.3.4 Mechanical data
    Samsung SGH-600 / SGH-2100
    Jun, 30 2000 - 04:47
    Secret Codes

    *#06# -> Show IMEI
    *#9999# -> Show Software Version
    *#0837# -> Show Software Version (instructions)
    *#0001# -> Show Serial Parameters
    *#9125# -> Activates the smiley when charging.

    *#9998*228# -> Battery status (capacity, voltage, temperature)
    *#9998*246# -> Program status
    *#9998*289# -> Change Alarm Buzzer Frequency
    *#9998*324# -> Debug screens
    *#9998*364# -> Watchdog
    *#9998*377# -> EEPROM Error Stack - Use side keys to select values. Cancel and ok.
    *#9998*427# -> Trace Watchdog
    *#9998*523# -> Change LCD contrast - Only with version G60RL01W
    *#9998*544# -> Jig detect
    *#9998*636# -> Memory status
    *#9998*746# -> SIM File Size
    *#9998*778# -> SIM Service Table
    *#9998*785# -> RTK (Run Time Kernel) errors - if ok then phn is reset, info is put in memory error. *#9998*786# -> Run, Last UP, Last DOWN
    *#9998*837# -> Software Version
    *#9998*842# -> Test Vibrator - Flash the screenligth during 10 seconds and vibration activated.
    *#9998*862# -> Vocoder Reg - Normal, Earphone or carkit can be selected
    *#9998*872# -> Diag
    *#9998*947# -> Reset On Fatal Error
    *#9998*999# -> Last/Chk

    *#9998*9266# -> Yann debug screen (=Debug Screens?)
    *#9998*9999# -> Software version

    *0001*s*f*t# -> Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete)
    *0002*?# -> unknown
    *0003*?# -> unknown

    SP-unlock SGH-600 and SGH 2100

    *2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!! )
    But also changes IMEI to 447967-89-400044-0, To restore your old IMEI use the IMEI program found on the software page.

    *2767*2878# -> Custom EEEPROM Reset

    These codes has been tested with version FLD_2C6 G60SB03X of Samsung SGH-600



    Alcatel One Touch Easy
    Jun, 30 2000 - 05:51
    Secret Codes

    To view IMEI (International Mobile Equipment Identity) number enter *#06#

    To Enter Service Menu enter: *#000000#

    To view Secret Menu type 000000 then press *

    Secret Menu Appears
    TRACES channel indicator menus
    ARRETS - ?
    VIDER ARRETS Press OK and the phone responds: This action is executed!
    CTRL CHARGE It show the charger voltage and battery voltage.
    DAMIER display test

    The Service provider (SP) lock is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

    Removing SP lock on Alcatel Easy
    This is how to remove the SP lock on Alcatel (one touch) Easy. (You wil need a cable, a eeprom device and some sw)

    Edit the eeprom:

    Address Replace with
    ------------- ---------------
    176h FFh
    177h FFh




    Alcatel unlock Generator
    Jun, 30 2000 - 07:05
    Here's a program that generates the lock/unlock codes for the alcatel phones (One Touch Easy ..)
    NB. The program may not work with 203 & newer versions of the software.

    Instructions for unlock.exe
    Once you enter your IMEI, you got 2 codes, ON, OFF plus phone type. ON is the code for turning on the SIMLOCK. We don't wanna do that, right? :) So let's go for the OFF code. This is supposed to be the one to remove the SIMLOCK, but it's incomplete, at least for the network providers in Spain. This number, as you have seen, is in HEX format. I think it's a kind of universal code in which any netword provide add another fixed number (always the same) and the correct UNLOCK CODE is the sum of both of them. Let's see this in an example.

    IMEI: 330020536226XXX
    ON: 50453d90
    OFF: 10453d90
    Phone type: Alcatel HC800
    Network provider: E MOVISTAR (214-07)

    If we introduce the OFF code, the phone won't accept it. We have to add another number to this code. In Spain and for 214-07 (MoviStar) this is 9FDFFA. So we have to sum this numbers. The easier way is by loading the windows's calc, use the Hex mode and realize the sum 10453d90+9FDFFA=10E51D8A 10E51D8A is the right number. So we type this in our phone and ... the SIMLOCK is removed
     
    أعجب بهذه المشاركة laabidikamel
  4. MASK

    MASK المدير العام طاقم الإدارة

    إنضم إلينا في:
    ‏15 نوفمبر 2005
    المشاركات:
    23.079
    الإعجابات المتلقاة:
    27.069
      03-01-2006 17:20
    رائع أخي الغالي أشرف ونتمنى منك كل ماهو جديد ومفيد
     
  5. hamza273

    hamza273 عضو نشيط

    إنضم إلينا في:
    ‏21 نوفمبر 2005
    المشاركات:
    238
    الإعجابات المتلقاة:
    16
      04-01-2006 14:17
    مشكوووووووووووور اخى
    عمل رائع
     
  6. alaoui

    alaoui عضو جديد

    إنضم إلينا في:
    ‏29 جانفي 2006
    المشاركات:
    47
    الإعجابات المتلقاة:
    6
      07-02-2006 12:07
    hi i want code siemans cf75 ok tty
     
  7. taher27

    taher27 عضو جديد

    إنضم إلينا في:
    ‏23 فيفري 2006
    المشاركات:
    4
    الإعجابات المتلقاة:
    1
      04-03-2006 23:49
    est-ce que vous pouvez m'aider a debloquer NOKIA6880
     
  8. beldimx

    beldimx عضو نشيط

    إنضم إلينا في:
    ‏3 أفريل 2006
    المشاركات:
    256
    الإعجابات المتلقاة:
    162
      06-04-2006 11:31
    merci beaucoup
     
  9. zoroking

    zoroking نجم المنتدى

    إنضم إلينا في:
    ‏19 نوفمبر 2005
    المشاركات:
    3.365
    الإعجابات المتلقاة:
    6.445
      07-04-2006 10:44
    شكرا علي المعلومات
     
حالة الموضوع:
مغلق

مشاركة هذه الصفحة

جاري تحميل الصفحة...