@@BlackHole-3.X_Dm800se@@

الحالة
مغلق و غير مفتوح للمزيد من الردود.

fairman

كبير مراقبي فريق الدريم بوكس
طاقم الإدارة
إنضم
8 جانفي 2012
المشاركات
30.864
مستوى التفاعل
134.245
oakaxbdpdnq9siy6g.jpg


BlackHole-3.x

jx5r5x4x10g4ilv6g.jpg


ke0wm680z9qam616g.jpg


الصورة من بنائي الشخصي بالكامل ومعتمده على سورس 5 openpli وملفات البلاك هول الأصلية
GCC 6
Glibc 2.24
Kernel 3.2

Python 2.7.12

ke0wm680z9qam616g.jpg


تم بناء صورتين إلى الأجهزة التالية:


-الجهاز الأصلي

-جهاز مقلد سيم2 Sim2-SSl84D

ke0wm680z9qam616g.jpg


-تم بناء الصورة من الصفر
-دمج أحدث ملفات Gstreamer
-تعديل جميع الخصائص لتناسب جهاز الدريم بوكس وتصبح الصورة مخصصه له
-تعديل خاصية SpeedUP وأصبحت فقط الى الدريم بوكس بعيده عن اجهزة +VU
-عمل وبناء فيد خاص لصورة (الفيد قيد التطوير) لذلك ربما يكون هناك بعض البكيجات غير موجودة سوف تضاف على فترات
-خاصية Teleportation تم تعديلها لتعمل على سورس Openpli حتى الفرق الرسمي للبلاك هول صورهم OpenBH لا تعمل الخاصية (فقط هنا)
-وهذه بعض الإضافات


ke0wm680z9qam616g.jpg


مهم جداً لمستخدمي Wifi

تحمل الدرايفر الصحيح لقطعة الواي فاي لديكم وعمل restart enigma2 وسوف تحصلون على خيار الواير لس في منطقة Network في مسار
menu > setup > System > Expert settings
يجب أن يكون الجهاز متصل بالإنترنيت وتحمل الدرايفر من
menu > plugins > Download > Drivers
إذا كنتم لا تعلمون ما هو الدرايفر الصحيح لجهازكم او تحتاجون الدرايفر بشكل يدوي تثبيته أعطوا هذا الأمر في التلنت
وسوف تجد ملف اسمه logo في tmp/ ارفقهوه هنا

كود:
cat /proc/bus/usb/devices >/tmp/logo

ke0wm680z9qam616g.jpg


مهم جداً لمستخدمي خدمة IPTV


يجب تثبيت هذا البكيج ffmpeg من فيد الصورة أولاً قبل تثبيت أي بلجن او أستخدام اي خدمه معينه للـ IPTV
فهو مهم لثبات عملية الـ IPTV

ولكن قبل التثبيت تحتاج الى مساحة أقل تقدير 6MB وتستطيع معرفة المساحة المتاحة بهذا الأمر في التلنت

كود:
df -h /
وسوف تكون النتيجة كما يلي مثال من على جهازي

كود:
root@dm800se:/var/volatile/tmp# df -h /Filesystem                Size      Used Available Use% Mounted on
/dev/root                 3.7G      2.0G      1.5G  57% /

لدي مساحة متوفرة اكثر من 1.5GB لأن الصورة على الفلاش الخارجي

بعدها تستطيع تثبيت البكيج


أمر تثبيت البلجن من التلنت هو

كود:
opkg update
opkg install ffmpeg

وهنا توضيح من موقع openpli بخصوص البكيج وضرورته مع بلجن IPTVPlayer

تثبيت بلجن IPTVPlayer أخر إصدار من خلال
Green Button > Blue Button > IPTVPlayer

بعد تثيت البلجن وعمل restart enigma2 هذه أفضل إعدادات لجعل البلجن يعمل بثبات وبدون إنقطاع

adcc8hcwhmnx2126g.jpg


u1nqx8j4jjmz8jy6g.jpg


بعض التطبيقات في البلجن ربما تواجهون بها تقطيع كثير للافلام والمسلسلات لذلك اعملوا هذه الإعدادات الإضافية:
-الدخول على التطبيق الذي تريدونه
-الضغط على الزر الأزرق more
-الدخول على Set active movie player
-نختار الخيار الثاني external eplayer3 with buffering


بهذه الأعدادات الإضافية لن ينقطع عنكم البث للأفلام نهائياً


ke0wm680z9qam616g.jpg


لجعل المشغل الخارجي (explayer3) هو الذي يتحكم في تشغيل الفيديوهات سواء المسجلة او من بلاجن التشغيل مثل Youtube وهو الأفضل
لانه يدعم أغلب الصيغ يجب تطبيق ما يلي:

تحميل البكيج والبلجن التاليين

كود:
opkg update
opkg install exteplayer3

ملاحظة: البعض يريد فقط إستخدم البلجن مع المشغل خارجي وهو gstplayer لانه لا يريد إستنزاف الذاكرة وبالتالي لا يحتاج الى تحميل بكيج ffmpeg و ملف exteplayer3 فقط يحمل البلجن لا غير بهذين الأمرين
كود:
opkg update
opkg install enigma2-plugin-systemplugins-serviceapp
ثم يطبق الخطوات التالية وبدل أن يجعل exteplayer3 المشغل الخارجي يجعله gstplayer

بعد تثبيت البلجن نعمل restart enigma2
ثم نفتح إعدادات بلجن
serviceapp من خلال
menu > setup > system > serviceapp

ونطبق ما هو في الصورة من إعدادات ونعمل restart enigma2
وبهذه يصبح المشغل الإفتراضي هو explayer3

738926

ke0wm680z9qam616g.jpg


(أما الذين يريدون إستخدم بلجن IPTVPlayer فقط وبدون تحميل أي ملفات إضافية)

ولتفادي الإنقطاع النهائي وعدم تثبيت البكيجات يجب عمل هذه الإعدادات في البلجن كما توضح الصورتين

759864


759865


ke0wm680z9qam616g.jpg


للذين يستخدمون بلجن CrossEPG لم يدمج بالصورة لذلك يمكن تحميله وكذلك تحميل بعض البلاجن من خاصيةSpeed UP
الزر الأزرق ثم الزرق الأزرق كذلك ثم Black Hole Speed Up

تم تعديل الخاصية وإضافة بلاجن اخرى من تعديلي ...

ke0wm680z9qam616g.jpg

في هذا الموضوع فقط سوف يتم النقاش حول الصورة (الدعم فقط للفلاش الداخلي)
في حالة وجود مشكلة او كراش (يجب ثم يجب) إرفاق الكراش لوجو بدونه لن يتم المساعدة ...
تجدونه في tmp/ او في /home/root/ او في hdd/



ملاحظة: في حال تحويل الصورة الى الأجهزة الأخرى مثل 500HD او 800se V2 او خلافة لن تعمل بعض الخصائص مثل wifi وTeleportation .. لذلك لن يكون هناك دعم لتلك الأجهزة بسبب اختلاف الكيرنل والـ glib و الدرايفرات ... الدعم في هذا الموضوع فقط لجهاز 800se

ke0wm680z9qam616g.jpg


تستطيعون الدخول على فيد الصورة وتحميل ما تريدون من خلال التلنت او من خلال
(Menu > Plugins > Red Button (Download Plugins

ke0wm680z9qam616g.jpg

في حالة وجود تحديثات جديدة سوف تستطيعون تحميلها بدون الحاجة لتحميل الصورة من
Green Button > Yellow Button > Online Black Hole image update

ke0wm680z9qam616g.jpg


تحميل الإيموهات من خلال
menu > plugins > Green Button > SoftCams


ke0wm680z9qam616g.jpg


للدخول إلى ملفات الجهاز من الاندرويد

ke0wm680z9qam616g.jpg

ke0wm680z9qam616g.jpg


اخر إصدار 3.2.4
22 - 10 -2017

ke0wm680z9qam616g.jpg

ke0wm680z9qam616g.jpg


تحميل الصورة لجهاز الأصلي

تحميل الصورة لجهاز Japhar

تحميل الصورة لجهاز Sim2

بالمرفقات بلجن BarryAllen 11.93 معدل من طرفي ليعمل على الصورة فقط للاجهزة الأصلية البلجن
 

المرفقات

  • BarryAllen_11.93-MOD-RAED_Genuine-Box.ipk
    2,3 MB · المشاهدات: 36
التعديل الأخير:
هل يعمل فيها نظام بليند سكان اخي الغالي حسين ربي يكرمك وشكرا لما تقدمه
 
من المفروض جميع الخصائص تعمل لأن الصورة مبنية بالكامل لجهاز 800se وليست معدلة عزيزي احمد (جرب بنفسك وأعطيني النتيجة) وإذا كان هناك كراش او شيء أرفقه ليتم إصلاحه

ملاحظة: خاصية blind scan ليست موجوده بالصورة إفتراضياً يجب تحميلها من الفيد

1.jpg


2.jpg
 
التعديل الأخير:
شكرا لك اخي الغالي حسين البلاجين الموجود بالفيد ليس كالبلاجين المبني من الاساس الموجود بالفيد يعطيك خيارين الاول ان يعمل بنظام البحث الاعمى بشكل كامل وهو الرئيسي وعند اخياره يعطي بانه غير متوافق مع التيونر اما الخيار الثاني فيعطيك بحث اعمى لكن للترددات الموجوده في الرسيفر يعني لافائده منه
 
بعد تثبيت الصورة على الفلاش الخارجى و ضبط الاعدادات و عند الوصول إلى التحكم الابوى تعمل كراش و ترستر الجهاز بهذا الكراش
كود:
BlackHole Enigma2 crash log

crashdate=Wed Nov 16 16:16:17 2016
compiledate=Nov 15 2016
skin=skin.xml
sourcedate=2016-11-15
branch=master
rev=1ef370b
component=Enigma2

stbmodel=dm800se
kernelcmdline=root=/dev/mtdblock3 rootfstype=jffs2 rw console=ttyS0,115200 debug bmem=116M@140M
nimsockets=NIM Socket 0:
imageversion=version=1000201604070040
imageissue=[0;35m  [1;32m  .--.


612> [SecConfigure] Add sat 1082
<  277.612> [SecConfigure] Add sat 1083
<  277.613> [SecConfigure] Add sat 1106
<  277.613> [SecConfigure] Add sat 1130
<  277.614> [SecConfigure] Add sat 1131
<  277.615> [SecConfigure] Add sat 1156
<  277.615> [SecConfigure] Add sat 1160
<  277.616> [SecConfigure] Add sat 1195
<  277.617> [SecConfigure] Add sat 1201
<  277.617> [SecConfigure] Add sat 1222
<  277.618> [SecConfigure] Add sat 1223
<  277.618> [SecConfigure] Add sat 1240
<  277.619> [SecConfigure] Add sat 1251
<  277.620> [SecConfigure] Add sat 1280
<  277.620> [SecConfigure] Add sat 1285
<  277.621> [SecConfigure] Add sat 1320
<  277.621> [SecConfigure] Add sat 1321
<  277.622> [SecConfigure] Add sat 1340
<  277.622> [SecConfigure] Add sat 1341
<  277.623> [SecConfigure] Add sat 1380
<  277.624> [SecConfigure] Add sat 1381
<  277.624> [SecConfigure] Add sat 1400
<  277.625> [SecConfigure] Add sat 1401
<  277.625> [SecConfigure] Add sat 1440
<  277.626> [SecConfigure] Add sat 1520
<  277.626> [SecConfigure] Add sat 1540
<  277.627> [SecConfigure] Add sat 1560
<  277.628> [SecConfigure] Add sat 1590
<  277.628> [SecConfigure] Add sat 1591
<  277.629> [SecConfigure] Add sat 1600
<  277.629> [SecConfigure] Add sat 1620
<  277.630> [SecConfigure] Add sat 1660
<  277.631> [SecConfigure] Add sat 1661
<  277.631> [SecConfigure] Add sat 1690
<  277.632> [SecConfigure] Add sat 1691
<  277.632> [SecConfigure] Add sat 1720
<  277.633> [SecConfigure] Add sat 1721
<  277.633> [SecConfigure] Add sat 1800
<  277.634> [SecConfigure] Add sat 1801
<  277.635> [SecConfigure] Add sat 1829
<  277.636> [SecConfigure] Add sat 2209
<  277.636> [SecConfigure] Add sat 2249
<  277.637> [SecConfigure] Add sat 2269
<  277.637> [SecConfigure] Add sat 2289
<  277.638> [SecConfigure] Add sat 2310
<  277.638> [SecConfigure] Add sat 2329
<  277.639> [SecConfigure] Add sat 2330
<  277.640> [SecConfigure] Add sat 2349
<  277.640> [SecConfigure] Add sat 2350
<  277.641> [SecConfigure] Add sat 2369
<  277.641> [SecConfigure] Add sat 2370
<  277.642> [SecConfigure] Add sat 2389
<  277.643> [SecConfigure] Add sat 2390
<  277.643> [SecConfigure] Add sat 2409
<  277.644> [SecConfigure] Add sat 2410
<  277.644> [SecConfigure] Add sat 2431
<  277.645> [SecConfigure] Add sat 2432
<  277.645> [SecConfigure] Add sat 2469
<  277.646> [SecConfigure] Add sat 2470
<  277.647> [SecConfigure] Add sat 2487
<  277.647> [SecConfigure] Add sat 2488
<  277.648> [SecConfigure] Add sat 2489
<  277.648> [SecConfigure] Add sat 2500
<  277.649> [SecConfigure] Add sat 2526
<  277.649> [SecConfigure] Add sat 2549
<  277.650> [SecConfigure] Add sat 2550
<  277.651> [SecConfigure] Add sat 2569
<  277.651> [SecConfigure] Add sat 2570
<  277.652> [SecConfigure] Add sat 2589
<  277.652> [SecConfigure] Add sat 2590
<  277.653> [SecConfigure] Add sat 2607
<  277.654> [SecConfigure] Add sat 2608
<  277.654> [SecConfigure] Add sat 2629
<  277.655> [SecConfigure] Add sat 2630
<  277.656> [SecConfigure] Add sat 2649
<  277.656> [SecConfigure] Add sat 2650
<  277.657> [SecConfigure] Add sat 2689
<  277.657> [SecConfigure] Add sat 2690
<  277.658> [SecConfigure] Add sat 2709
<  277.658> [SecConfigure] Add sat 2710
<  277.659> [SecConfigure] Add sat 2728
<  277.660> [SecConfigure] Add sat 2729
<  277.660> [SecConfigure] Add sat 2769
<  277.661> [SecConfigure] Add sat 2780
<  277.661> [SecConfigure] Add sat 2790
<  277.662> [SecConfigure] Add sat 2812
<  277.662> [SecConfigure] Add sat 2819
<  277.663> [SecConfigure] Add sat 2820
<  277.664> [SecConfigure] Add sat 2830
<  277.664> [SecConfigure] Add sat 2849
<  277.665> [SecConfigure] Add sat 2850
<  277.665> [SecConfigure] Add sat 2873
<  277.666> [SecConfigure] Add sat 2881
<  277.667> [SecConfigure] Add sat 2899
<  277.667> [SecConfigure] Add sat 2900
<  277.668> [SecConfigure] Add sat 2930
<  277.668> [SecConfigure] Add sat 2949
<  277.669> [SecConfigure] Add sat 2950
<  277.670> [SecConfigure] Add sat 2970
<  277.670> [SecConfigure] Add sat 2985
<  277.671> [SecConfigure] Add sat 2989
<  277.671> [SecConfigure] Add sat 2990
<  277.672> [SecConfigure] Add sat 3019
<  277.672> [SecConfigure] Add sat 3020
<  277.673> [SecConfigure] Add sat 3044
<  277.674> [SecConfigure] Add sat 3069
<  277.675> [SecConfigure] Add sat 3070
<  277.675> [SecConfigure] Add sat 3099
<  277.676> [SecConfigure] Add sat 3100
<  277.676> [SecConfigure] Add sat 3124
<  277.677> [SecConfigure] Add sat 3149
<  277.677> [SecConfigure] Add sat 3150
<  277.678> [SecConfigure] Add sat 3168
<  277.679> [SecConfigure] Add sat 3169
<  277.679> [SecConfigure] Add sat 3194
<  277.680> [SecConfigure] Add sat 3195
<  277.681> [SecConfigure] Add sat 3224
<  277.681> [SecConfigure] Add sat 3225
<  277.682> [SecConfigure] Add sat 3254
<  277.682> [SecConfigure] Add sat 3255
<  277.683> [SecConfigure] Add sat 3284
<  277.683> [SecConfigure] Add sat 3285
<  277.684> [SecConfigure] Add sat 3300
<  277.685> [SecConfigure] Add sat 3324
<  277.685> [SecConfigure] Add sat 3325
<  277.686> [SecConfigure] Add sat 3354
<  277.686> [SecConfigure] Add sat 3355
<  277.687> [SecConfigure] Add sat 3379
<  277.687> [SecConfigure] Add sat 3380
<  277.688> [SecConfigure] Add sat 3400
<  277.689> [SecConfigure] Add sat 3419
<  277.689> [SecConfigure] Add sat 3420
<  277.690> [SecConfigure] Add sat 3450
<  277.690> [SecConfigure] Add sat 3460
<  277.691> [SecConfigure] Add sat 3475
<  277.691> [SecConfigure] Add sat 3489
<  277.692> [SecConfigure] Add sat 3490
<  277.693> [SecConfigure] Add sat 3519
<  277.693> [SecConfigure] Add sat 3520
<  277.694> [SecConfigure] Add sat 3530
<  277.695> [SecConfigure] Add sat 3549
<  277.695> [SecConfigure] Add sat 3550
<  277.696> [SecConfigure] Add sat 3560
<  277.697> [SecConfigure] Add sat 3569
<  277.697> [SecConfigure] Add sat 3570
<  277.698> [SecConfigure] Add sat 3591
<  277.698> [SecConfigure] Add sat 3592
<  277.699> [SecConfigure] sec config completed
<  277.704> finished
<  277.704> Updating values in step 7
<  277.706> playing None
<  277.711> keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
<  277.712> Updating values in step 8
<  277.715> keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
<  277.716> Updating values in step 9
<  277.719> keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
<  277.719> Updating values in step 10
<  277.722> keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
<  277.723> Updating values in step 11
<  277.725> keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
<  277.726> Updating values in step 12
<  277.729> keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
<  277.729> Updating values in step 13
<  277.732> keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
<  277.733> Updating values in step 14
<  277.736> keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
<  277.737> Updating values in step 15
<  277.740> keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
<  277.740> Updating values in step 16
<  277.743> keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
<  277.743> Updating values in step 17
<  277.747> wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("LEFT")\nself.selectKey("RIGHT")', 'text': 'Do you want to install a channel list?', 'id': 'channels', 'condition': u'from Components.NimManager import nimmanager\nself.condition = nimmanager.somethingConnected() and config.misc.installwizard.hasnetwork.value and config.misc.installwizard.ipkgloaded.value', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': '', 'config': {'screen': <class 'Screens.InstallWizard.InstallWizard'>, 'args': '1', 'type': 'ConfigList'}}
<  277.749> wizard text Do you want to install a channel list?
<  277.750> code self.clearSelectedKeys()
self.selectKey("LEFT")
self.selectKey("RIGHT")<  277.750>
<  277.754> selectPic: arrowup
<  277.756> selectPic: arrowup2
<  277.758> showing list, 17
<  277.758> self.list: <Components.Sources.List.List object at 0x73f62270>
<  277.759> self.list: <Components.Sources.List.List object at 0x73f62270>
<  277.759> setZPosition
<  277.766> showing config
<  277.767> wizard screen <class 'Screens.InstallWizard.InstallWizard'>
<  277.772> [SKIN] No skin to read...
<  277.777> warning, skin is missing element config in <class 'Screens.InstallWizard.InstallWizard'>
<  277.779> clearConfigList <Components.ConfigList.ConfigList object at 0x73f34770> <Components.ConfigList.ConfigList object at 0x73f621f0>
<  277.781> clearConfigList <Components.ConfigList.ConfigList object at 0x73f621f0> <Components.ConfigList.ConfigList object at 0x73f621f0>
<  277.782> Now: 17
<  277.782> Now: 17
<  278.485> action ->  WizardActions ok
<  278.486> OK
<  278.491> executing opkg remove enigma2-plugin-settings-*
<  278.499> [SKIN] Unable to find screen 'WizardMarginsTemplate' referred in screen 'InstallWizardIpkgUpdater'
<  278.502> [SKIN] Unable to find screen 'RemoteControlTemplate' referred in screen 'InstallWizardIpkgUpdater'
<  278.552> finished
<  278.554> Updating values in step 18
<  278.560> wizard step: {'code': u'self.hideRc()', 'text': 'Do you want to do a service scan?', 'id': 'scanquestion', 'condition': u'from Components.NimManager import nimmanager\nself.condition = nimmanager.somethingConnected() and not config.misc.installwizard.channellistdownloaded.value', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [('No', 'finisheddefaultsatlists'), ('Yes, do an automatic scan now', 'scan'), ('Yes, do a manual scan now', 'manualscan')], 'timeout': None, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
<  278.561> wizard text Do you want to do a service scan?
<  278.563> code self.hideRc()
<  278.566> showing list, 18
<  278.567> self.list: <Components.Sources.List.List object at 0x73f62270>
<  278.567> self.list: <Components.Sources.List.List object at 0x73f62270>
<  278.568> setZPosition
<  278.576> showing config
<  278.577> Now: 18
<  278.578> Now: 18
<  278.881> data: No packages removed.
<  278.881>
<  278.883> executing opkg install enigma2-plugin-settings-henksat-19e-23e-basis
<  281.034> data: Collected errors:
<  281.035>
<  281.036> data:  * opkg_prepare_url_for_install: Couldn't find anything to satisfy 'enigma2-plugin-settings-henksat-19e-23e-basis'.
<  281.036>
<  281.056> Updating values in step 18
<  281.059> keys*******************: ['code', 'evaluatedlist', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
<  281.059> Updating values in step 19
<  281.062> keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
<  281.063> Updating values in step 20
<  281.066> keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
<  281.067> Updating values in step 21
<  281.070> keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
<  281.070> Updating values in step 22
<  281.072> wizard step: {'code': '', 'text': 'Do you want to enable the parental control feature on your reciver?', 'id': 'finisheddefaultsatlists', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [('Yes', 'parentalsetup'), ('No', 'end')], 'timeout': None, 'codeafter': u'if self["list"].index == 0:\n\tconfig.ParentalControl.configured.value = True\nelse:\n\tconfig.ParentalControl.configured.value = False\nconfig.ParentalControl.configured.save()', 'config': {'screen': None, 'args': None, 'type': ''}}
<  281.073> wizard text Do you want to enable the parental control feature on your reciver?
<  281.075> showing list, 22
<  281.076> self.list: <Components.Sources.List.List object at 0x73f62270>
<  281.076> self.list: <Components.Sources.List.List object at 0x73f62270>
<  281.077> setZPosition
<  281.083> showing config
<  281.084> setPixmapNum(1) failed! defined pixmaps: []
<  281.901> action ->  WizardActions ok
<  281.902> OK
<  281.902> finished
<  281.904> current: ('Yes', 'parentalsetup')
<  281.905> getStepWithID: parentalsetup
<  281.906> result: 22
<  281.906> code if self["list"].index == 0:
   config.ParentalControl.configured.value = True
else:
   config.ParentalControl.configured.value = False
config.ParentalControl.configured.save()<  281.907>
<  281.910> Updating values in step 23
<  281.912> wizard step: {'code': '', 'text': 'You need to set a PIN code and hide it from your children.\n\nDo you want to set the pin now?', 'id': 'parentalsetup', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [('Yes', 'finishparentalsetup'), ('No', 'warnpin')], 'timeout': None, 'codeafter': u'from ParentalControlSetup import ParentalControlChangePin\nif self["list"].index == 0:\n\tself.session.open(ParentalControlChangePin, config.ParentalControl.servicepin[0], _("parental control pin"))', 'config': {'screen': None, 'args': None, 'type': ''}}
<  281.912> wizard text You need to set a PIN code and hide it from your children.

Do you want to set the pin now?<  281.913>
<  281.914> showing list, 23
<  281.915> self.list: <Components.Sources.List.List object at 0x73f62270>
<  281.916> self.list: <Components.Sources.List.List object at 0x73f62270>
<  281.916> setZPosition
<  281.923> showing config
<  281.924> Now: 23
<  281.924> Now: 23
<  282.994> action ->  WizardActions down
<  282.999> down
<  283.469> action ->  WizardActions ok
<  283.469> OK
<  283.469> finished
<  283.471> current: ('No', 'warnpin')
<  283.472> getStepWithID: warnpin
<  283.473> result: 23
<  283.474> code from ParentalControlSetup import ParentalControlChangePin
if self["list"].index == 0:
   self.session.open(ParentalControlChangePin, config.ParentalControl.servicepin[0], _("parental control pin"))<  283.474>
<  283.477> Traceback (most recent call last):
<  283.477>  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 66, in action
<  283.478>  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
<  283.478>  File "/usr/lib/enigma2/python/Screens/Wizard.py", line 376, in ok
<  283.479>  File "/usr/lib/enigma2/python/Screens/Wizard.py", line 345, in finished
<  283.479>  File "/usr/lib/enigma2/python/Screens/Wizard.py", line 454, in runCode
<  283.480>  File "<string>", line 1, in <module>
<  283.481> ImportError: cannot import name ParentalControlChangePin
 
@merdas
هذا هو الموجود في فيد core pli 5 ويأتي مع البناء بشكل آلي عندما أقوم ببناء الفيد بالكامل .. انا لم أضفه من أي مكان ...
حمل وجرب صورة openpli 4 الرسمية لفريق openpli ؟! وانظر للخاصية هي نفسيها التي موجوده في صورتي ...

@mohammed kam
اخي هل قرات بداية الموضوع ؟!
الدعم فقط للفلاش الداخلي لا ادعم الفلاش الخارجي نهائياً
 
عزيزي ردي واضح يا غالي .. في هذا الموضوع لا يوجد أي دعم للفلاش الخارجي (جميع الفرق لصور الاصلية لو تسألهم عن الفلاش الخارجي لم يجيبونك) بسبب كثرة المشاكل .. جرب الصورة على الداخلي وإذا واجهت مشكلة أرسلها
 
نزلتها على الفلاش الداخلى و اعطانى كراش ايضا عند محاولة ضبط الاعدادات
كود:
BlackHole Enigma2 crash log

crashdate=Thu Jan  1 01:04:49 1970
compiledate=Nov 15 2016
skin=skin.xml
sourcedate=2016-11-15
branch=master
rev=1ef370b
component=Enigma2

stbmodel=dm800se
kernelcmdline=root=/dev/mtdblock3 rootfstype=jffs2 rw console=ttyS0,115200 bmem=116M@140M
nimsockets=NIM Socket 0:
imageversion=version=1000201604070040
imageissue=[0;35m  [1;32m  .--.


dd sat 1082
<  283.598> [SecConfigure] Add sat 1083
<  283.599> [SecConfigure] Add sat 1106
<  283.599> [SecConfigure] Add sat 1130
<  283.600> [SecConfigure] Add sat 1131
<  283.600> [SecConfigure] Add sat 1156
<  283.601> [SecConfigure] Add sat 1160
<  283.602> [SecConfigure] Add sat 1195
<  283.602> [SecConfigure] Add sat 1201
<  283.603> [SecConfigure] Add sat 1222
<  283.603> [SecConfigure] Add sat 1223
<  283.604> [SecConfigure] Add sat 1240
<  283.604> [SecConfigure] Add sat 1251
<  283.605> [SecConfigure] Add sat 1280
<  283.606> [SecConfigure] Add sat 1285
<  283.606> [SecConfigure] Add sat 1320
<  283.607> [SecConfigure] Add sat 1321
<  283.607> [SecConfigure] Add sat 1340
<  283.608> [SecConfigure] Add sat 1341
<  283.608> [SecConfigure] Add sat 1380
<  283.609> [SecConfigure] Add sat 1381
<  283.610> [SecConfigure] Add sat 1400
<  283.610> [SecConfigure] Add sat 1401
<  283.611> [SecConfigure] Add sat 1440
<  283.611> [SecConfigure] Add sat 1520
<  283.612> [SecConfigure] Add sat 1540
<  283.612> [SecConfigure] Add sat 1560
<  283.613> [SecConfigure] Add sat 1590
<  283.613> [SecConfigure] Add sat 1591
<  283.614> [SecConfigure] Add sat 1600
<  283.615> [SecConfigure] Add sat 1620
<  283.616> [SecConfigure] Add sat 1660
<  283.616> [SecConfigure] Add sat 1661
<  283.617> [SecConfigure] Add sat 1690
<  283.617> [SecConfigure] Add sat 1691
<  283.618> [SecConfigure] Add sat 1720
<  283.618> [SecConfigure] Add sat 1721
<  283.619> [SecConfigure] Add sat 1800
<  283.620> [SecConfigure] Add sat 1801
<  283.620> [SecConfigure] Add sat 1829
<  283.621> [SecConfigure] Add sat 2209
<  283.621> [SecConfigure] Add sat 2249
<  283.622> [SecConfigure] Add sat 2269
<  283.622> [SecConfigure] Add sat 2289
<  283.623> [SecConfigure] Add sat 2310
<  283.624> [SecConfigure] Add sat 2329
<  283.624> [SecConfigure] Add sat 2330
<  283.625> [SecConfigure] Add sat 2349
<  283.625> [SecConfigure] Add sat 2350
<  283.626> [SecConfigure] Add sat 2369
<  283.626> [SecConfigure] Add sat 2370
<  283.627> [SecConfigure] Add sat 2389
<  283.628> [SecConfigure] Add sat 2390
<  283.628> [SecConfigure] Add sat 2409
<  283.629> [SecConfigure] Add sat 2410
<  283.629> [SecConfigure] Add sat 2431
<  283.630> [SecConfigure] Add sat 2432
<  283.630> [SecConfigure] Add sat 2469
<  283.631> [SecConfigure] Add sat 2470
<  283.632> [SecConfigure] Add sat 2487
<  283.632> [SecConfigure] Add sat 2488
<  283.633> [SecConfigure] Add sat 2489
<  283.633> [SecConfigure] Add sat 2500
<  283.634> [SecConfigure] Add sat 2526
<  283.635> [SecConfigure] Add sat 2549
<  283.635> [SecConfigure] Add sat 2550
<  283.636> [SecConfigure] Add sat 2569
<  283.637> [SecConfigure] Add sat 2570
<  283.637> [SecConfigure] Add sat 2589
<  283.638> [SecConfigure] Add sat 2590
<  283.638> [SecConfigure] Add sat 2607
<  283.639> [SecConfigure] Add sat 2608
<  283.639> [SecConfigure] Add sat 2629
<  283.640> [SecConfigure] Add sat 2630
<  283.641> [SecConfigure] Add sat 2649
<  283.641> [SecConfigure] Add sat 2650
<  283.642> [SecConfigure] Add sat 2689
<  283.642> [SecConfigure] Add sat 2690
<  283.643> [SecConfigure] Add sat 2709
<  283.643> [SecConfigure] Add sat 2710
<  283.644> [SecConfigure] Add sat 2728
<  283.645> [SecConfigure] Add sat 2729
<  283.645> [SecConfigure] Add sat 2769
<  283.646> [SecConfigure] Add sat 2780
<  283.646> [SecConfigure] Add sat 2790
<  283.647> [SecConfigure] Add sat 2812
<  283.647> [SecConfigure] Add sat 2819
<  283.648> [SecConfigure] Add sat 2820
<  283.649> [SecConfigure] Add sat 2830
<  283.649> [SecConfigure] Add sat 2849
<  283.650> [SecConfigure] Add sat 2850
<  283.650> [SecConfigure] Add sat 2873
<  283.651> [SecConfigure] Add sat 2881
<  283.652> [SecConfigure] Add sat 2899
<  283.652> [SecConfigure] Add sat 2900
<  283.653> [SecConfigure] Add sat 2930
<  283.653> [SecConfigure] Add sat 2949
<  283.654> [SecConfigure] Add sat 2950
<  283.654> [SecConfigure] Add sat 2970
<  283.655> [SecConfigure] Add sat 2985
<  283.656> [SecConfigure] Add sat 2989
<  283.657> [SecConfigure] Add sat 2990
<  283.657> [SecConfigure] Add sat 3019
<  283.658> [SecConfigure] Add sat 3020
<  283.658> [SecConfigure] Add sat 3044
<  283.659> [SecConfigure] Add sat 3069
<  283.659> [SecConfigure] Add sat 3070
<  283.660> [SecConfigure] Add sat 3099
<  283.661> [SecConfigure] Add sat 3100
<  283.661> [SecConfigure] Add sat 3124
<  283.662> [SecConfigure] Add sat 3149
<  283.662> [SecConfigure] Add sat 3150
<  283.663> [SecConfigure] Add sat 3168
<  283.663> [SecConfigure] Add sat 3169
<  283.664> [SecConfigure] Add sat 3194
<  283.664> [SecConfigure] Add sat 3195
<  283.665> [SecConfigure] Add sat 3224
<  283.666> [SecConfigure] Add sat 3225
<  283.666> [SecConfigure] Add sat 3254
<  283.667> [SecConfigure] Add sat 3255
<  283.667> [SecConfigure] Add sat 3284
<  283.668> [SecConfigure] Add sat 3285
<  283.669> [SecConfigure] Add sat 3300
<  283.669> [SecConfigure] Add sat 3324
<  283.670> [SecConfigure] Add sat 3325
<  283.670> [SecConfigure] Add sat 3354
<  283.671> [SecConfigure] Add sat 3355
<  283.671> [SecConfigure] Add sat 3379
<  283.672> [SecConfigure] Add sat 3380
<  283.673> [SecConfigure] Add sat 3400
<  283.673> [SecConfigure] Add sat 3419
<  283.674> [SecConfigure] Add sat 3420
<  283.674> [SecConfigure] Add sat 3450
<  283.675> [SecConfigure] Add sat 3460
<  283.676> [SecConfigure] Add sat 3475
<  283.676> [SecConfigure] Add sat 3489
<  283.677> [SecConfigure] Add sat 3490
<  283.677> [SecConfigure] Add sat 3519
<  283.678> [SecConfigure] Add sat 3520
<  283.679> [SecConfigure] Add sat 3530
<  283.679> [SecConfigure] Add sat 3549
<  283.680> [SecConfigure] Add sat 3550
<  283.680> [SecConfigure] Add sat 3560
<  283.681> [SecConfigure] Add sat 3569
<  283.681> [SecConfigure] Add sat 3570
<  283.682> [SecConfigure] Add sat 3591
<  283.683> [SecConfigure] Add sat 3592
<  283.683> [SecConfigure] sec config completed
<  283.688> finished
<  283.688> Updating values in step 7
<  283.690> playing None
<  283.696> keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
<  283.696> Updating values in step 8
<  283.699> keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
<  283.700> Updating values in step 9
<  283.703> keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
<  283.703> Updating values in step 10
<  283.706> keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
<  283.707> Updating values in step 11
<  283.709> keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
<  283.710> Updating values in step 12
<  283.713> keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
<  283.713> Updating values in step 13
<  283.717> keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
<  283.717> Updating values in step 14
<  283.720> keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
<  283.721> Updating values in step 15
<  283.723> keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
<  283.724> Updating values in step 16
<  283.727> keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
<  283.727> Updating values in step 17
<  283.731> wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("LEFT")\nself.selectKey("RIGHT")', 'evaluatedlist': [], 'text': 'Do you want to install a channel list?', 'id': 'channels', 'condition': u'from Components.NimManager import nimmanager\nself.condition = nimmanager.somethingConnected() and config.misc.installwizard.hasnetwork.value and config.misc.installwizard.ipkgloaded.value', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': '', 'config': {'screen': <class 'Screens.InstallWizard.InstallWizard'>, 'args': '1', 'type': 'ConfigList'}}
<  283.733> wizard text Do you want to install a channel list?
<  283.734> code self.clearSelectedKeys()
self.selectKey("LEFT")
self.selectKey("RIGHT")<  283.734>
<  283.738> selectPic: arrowup
<  283.740> selectPic: arrowup2
<  283.742> showing list, 17
<  283.742> self.list: <Components.Sources.List.List object at 0x7398bdd0>
<  283.743> self.list: <Components.Sources.List.List object at 0x7398bdd0>
<  283.743> setZPosition
<  283.750> showing config
<  283.751> wizard screen <class 'Screens.InstallWizard.InstallWizard'>
<  283.756> [SKIN] No skin to read...
<  283.761> warning, skin is missing element config in <class 'Screens.InstallWizard.InstallWizard'>
<  283.763> clearConfigList <Components.ConfigList.ConfigList object at 0x7397aef0> <Components.ConfigList.ConfigList object at 0x7398bd50>
<  283.764> clearConfigList <Components.ConfigList.ConfigList object at 0x7398bd50> <Components.ConfigList.ConfigList object at 0x7398bd50>
<  283.766> Now: 17
<  283.766> Now: 17
<  284.461> action ->  WizardActions ok
<  284.462> OK
<  284.467> executing opkg remove enigma2-plugin-settings-*
<  284.474> [SKIN] Unable to find screen 'WizardMarginsTemplate' referred in screen 'InstallWizardIpkgUpdater'
<  284.478> [SKIN] Unable to find screen 'RemoteControlTemplate' referred in screen 'InstallWizardIpkgUpdater'
<  284.528> finished
<  284.529> Updating values in step 18
<  284.535> wizard step: {'code': u'self.hideRc()', 'text': 'Do you want to do a service scan?', 'id': 'scanquestion', 'condition': u'from Components.NimManager import nimmanager\nself.condition = nimmanager.somethingConnected() and not config.misc.installwizard.channellistdownloaded.value', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [('No', 'finisheddefaultsatlists'), ('Yes, do an automatic scan now', 'scan'), ('Yes, do a manual scan now', 'manualscan')], 'timeout': None, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
<  284.537> wizard text Do you want to do a service scan?
<  284.538> code self.hideRc()
<  284.541> showing list, 18
<  284.542> self.list: <Components.Sources.List.List object at 0x7398bdd0>
<  284.543> self.list: <Components.Sources.List.List object at 0x7398bdd0>
<  284.543> setZPosition
<  284.551> showing config
<  284.552> Now: 18
<  284.553> Now: 18
<  284.854> data: No packages removed.
<  284.854>
<  284.856> executing opkg install enigma2-plugin-settings-henksat-19e-23e-basis
<  286.981> data: Collected errors:
<  286.981>
<  286.982> data:  * opkg_prepare_url_for_install: Couldn't find anything to satisfy 'enigma2-plugin-settings-henksat-19e-23e-basis'.
<  286.982>
<  287.001> Updating values in step 18
<  287.004> keys*******************: ['code', 'evaluatedlist', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
<  287.005> Updating values in step 19
<  287.008> keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
<  287.009> Updating values in step 20
<  287.012> keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
<  287.012> Updating values in step 21
<  287.016> keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
<  287.016> Updating values in step 22
<  287.018> wizard step: {'code': '', 'text': 'Do you want to enable the parental control feature on your reciver?', 'id': 'finisheddefaultsatlists', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [('Yes', 'parentalsetup'), ('No', 'end')], 'timeout': None, 'codeafter': u'if self["list"].index == 0:\n\tconfig.ParentalControl.configured.value = True\nelse:\n\tconfig.ParentalControl.configured.value = False\nconfig.ParentalControl.configured.save()', 'config': {'screen': None, 'args': None, 'type': ''}}
<  287.019> wizard text Do you want to enable the parental control feature on your reciver?
<  287.021> showing list, 22
<  287.021> self.list: <Components.Sources.List.List object at 0x7398bdd0>
<  287.022> self.list: <Components.Sources.List.List object at 0x7398bdd0>
<  287.022> setZPosition
<  287.029> showing config
<  287.030> setPixmapNum(1) failed! defined pixmaps: []
<  287.955> action ->  WizardActions ok
<  287.955> OK
<  287.956> finished
<  287.957> current: ('Yes', 'parentalsetup')
<  287.958> getStepWithID: parentalsetup
<  287.959> result: 22
<  287.960> code if self["list"].index == 0:
   config.ParentalControl.configured.value = True
else:
   config.ParentalControl.configured.value = False
config.ParentalControl.configured.save()<  287.960>
<  287.963> Updating values in step 23
<  287.965> wizard step: {'code': '', 'text': 'You need to set a PIN code and hide it from your children.\n\nDo you want to set the pin now?', 'id': 'parentalsetup', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [('Yes', 'finishparentalsetup'), ('No', 'warnpin')], 'timeout': None, 'codeafter': u'from ParentalControlSetup import ParentalControlChangePin\nif self["list"].index == 0:\n\tself.session.open(ParentalControlChangePin, config.ParentalControl.servicepin[0], _("parental control pin"))', 'config': {'screen': None, 'args': None, 'type': ''}}
<  287.966> wizard text You need to set a PIN code and hide it from your children.

Do you want to set the pin now?<  287.966>
<  287.968> showing list, 23
<  287.968> self.list: <Components.Sources.List.List object at 0x7398bdd0>
<  287.969> self.list: <Components.Sources.List.List object at 0x7398bdd0>
<  287.969> setZPosition
<  287.976> showing config
<  287.977> Now: 23
<  287.978> Now: 23
<  289.019> action ->  WizardActions down
<  289.025> down
<  289.478> action ->  WizardActions ok
<  289.478> OK
<  289.479> finished
<  289.480> current: ('No', 'warnpin')
<  289.481> getStepWithID: warnpin
<  289.482> result: 23
<  289.483> code from ParentalControlSetup import ParentalControlChangePin
if self["list"].index == 0:
   self.session.open(ParentalControlChangePin, config.ParentalControl.servicepin[0], _("parental control pin"))<  289.483>
<  289.486> Traceback (most recent call last):
<  289.486>  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 66, in action
<  289.486>  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
<  289.487>  File "/usr/lib/enigma2/python/Screens/Wizard.py", line 376, in ok
<  289.488>  File "/usr/lib/enigma2/python/Screens/Wizard.py", line 345, in finished
<  289.488>  File "/usr/lib/enigma2/python/Screens/Wizard.py", line 454, in runCode
<  289.489>  File "<string>", line 1, in <module>
<  289.489> ImportError: cannot import name ParentalControlChangePin
 
التعديل الأخير بواسطة المشرف:
ممتاز
تستطيع تجربتها على الداخلي او الخارجي (ولكن الداخلي اولاً) لاني لا ادعم الخارجي

حمل من المرفقات الملف المضغوط وفك الضغط عنه واجعل الصورة تقلع من جديد وعند الوصول الى قامة الإعدادات اعطي هذا الامر في التلنت
كود:
init 4
ثم ارسل الملف الذي حملته الى المسار التالي ووافق على الاستبدال
usr/share/enigma2/
ثم اعطي امر
كود:
init 3
وجرب من جديد ...
 

المرفقات

  • startwizard.xml.zip
    1,7 KB · المشاهدات: 42
الحالة
مغلق و غير مفتوح للمزيد من الردود.
أعلى