@@ Ncam EMU @@

Freesky

عضو
إنضم
13 جانفي 2012
المشاركات
68
مستوى التفاعل
66
لا تحتاج الى اي شيء إضافي .... فقط ثبت ipk وفعل السيرفرات المجانية..... والافضل ان تضع سطر سيرفر رسمي انت مشترنه يكون مضمون ...
السيرفرات المجانية غير مضمونه انا دمجتها في الايمو للمساعدة حينما تتوقف السيرفرات الرسمية ...
عندي أسطر من سيرفر الاخ linuxsat وهي تعمل اذا فعلت ايمو سي سي كام

أضفت الاسطر لملف cccam.cfg الموجود في نفس مسار ncam و اللي هو etc/tuxbox/config ولكن للاسف لم تفتح اي قناة

مادري وين المشكلة بالضبط

فتحت ملف اللوج .. وجودت هذا السطر متكرر حتى تحت السيفرارت التي اضفتها انا وهي اساسا تعمل على السي سي كام

(main) ERROR: can't create client work thread (errno=11 Resource temporarily unavailable)
(work) ERROR: can't create thread for reader (errno=11 Resource temporarily unavailable)
 
التعديل الأخير:

ahmedgalasaadl

نجم المنتدى
إنضم
6 أوت 2016
المشاركات
2.627
مستوى التفاعل
4.150

الشامي جلال

عضو فعال
عضو قيم
إنضم
16 ديسمبر 2020
المشاركات
549
مستوى التفاعل
2.757
ممكن الكونفيج الخاص بك
اخي لا يوجد ملف config خاص بي
كما قلت لك ملف config يتثبت مع الإيمو مباشرة أنا ما أضفت شيئ
فقط وضعت سطر الإشتراك واشتغلت القنوات
وهذا هو الملف أسفله
 

المرفقات

  • config.zip
    47,3 KB · المشاهدات: 19

julian05

عضو
إنضم
7 ديسمبر 2013
المشاركات
64
مستوى التفاعل
22
good morning sir fairman: ncam12.2 is installing but dont run looked this log please: thank you

Unbenannt.PNGUnbenannt.PNG2.PNGUnbenannt.PNG3.PNGUnbenannt.PNG4.PNG
 
التعديل الأخير بواسطة المشرف:

fairman

كبير مراقبي فريق الدريم بوكس
طاقم الإدارة
إنضم
8 جانفي 2012
المشاركات
28.008
مستوى التفاعل
113.131
We discussed in the previous responses this problem .... The problem you have is in the settings files or in the free servers that do not work for you, or your Internet service is blocked from these sites ...

Also try yo test other images.
 

julian05

عضو
إنضم
7 ديسمبر 2013
المشاركات
64
مستوى التفاعل
22
thank you sir for your answer. i have install new ncam the same dont running i dont use free server i have deleted from conf. oscam from mr mohammed is running. i have no problem with my server. setting file is new. looked please new log i hope thanks
 
التعديل الأخير:

fairman

كبير مراقبي فريق الدريم بوكس
طاقم الإدارة
إنضم
8 جانفي 2012
المشاركات
28.008
مستوى التفاعل
113.131
please don't send screenshots .... We need full log as like txt file .. And you should be to tell use what device you have and what image you are testing
 
التعديل الأخير:

julian05

عضو
إنضم
7 ديسمبر 2013
المشاركات
64
مستوى التفاعل
22
hallo sir my device is 7080hd image: newniga2.
>> NCam << cardserver log switched at Sun Oct 17 12:00:21 2021
-------------------------------------------------------------------------------
2021-10-17 12:00:21 00000000 s >> NCam << cardserver log switched, version 12.2, revision r1 build 12-10-2021 (mipsel-tuxbox-linux-gnu-libcurl)
2021-10-17 12:00:21 00000000 s (main) System name = Linux
2021-10-17 12:00:21 00000000 s (main) Host name = dm7080
2021-10-17 12:00:21 00000000 s (main) Release = 3.4-4.0-dm7080
2021-10-17 12:00:21 00000000 s (main) Version = #1 SMP Mon Oct 30 15:06:16 CET 2017
2021-10-17 12:00:21 00000000 s (main) Machine = mips
2021-10-17 12:00:21 00000000 s (main) Stb model = dm7080
2021-10-17 12:00:21 00000000 s (main) creating pidfile /tmp/.ncam/ncam.pid with pid 5767
2021-10-17 12:00:21 00000000 s (config) services reloaded: 0 services freed, 60 services loaded, rejected 0
2021-10-17 12:00:21 00000000 s (emu) NCam-emu version 798
2021-10-17 12:00:21 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2021-10-17 12:00:21 00000000 s (main) signal handling initialized
2021-10-17 12:00:21 00000000 s (config) 108 provid's loaded
2021-10-17 12:00:21 00000000 s (config) 1 service-id's loaded in 1 ms
2021-10-17 12:00:21 00000000 s (net) cs378x: initialized (fd=7, port=13001, prio=1 [ SO_PRIORITY IP_TOS ])
2021-10-17 12:00:21 00000000 s (net) newcamd: initialized (fd=8, port=12121, prio=1 [ SO_PRIORITY IP_TOS ])
2021-10-17 12:00:21 00000000 s (net) cccam: initialized (fd=9, port=12000, prio=1 [ SO_PRIORITY IP_TOS ])
2021-10-17 12:00:21 00000000 s (main) ERROR: can't create http thread (errno=11 Resource temporarily unavailable)
2021-10-17 12:00:21 00000000 s (main) ERROR: can't create reader check thread (errno=11 Resource temporarily unavailable)
2021-10-17 12:00:21 00000000 s (main) ERROR: can't create cw_process thread (errno=11 Resource temporarily unavailable)
2021-10-17 12:00:21 00000000 s (main) ERROR: can't create chkcache_process thread (errno=11 Resource temporarily unavailable)
2021-10-17 12:00:21 00000000 s (reader) emulator [emu] creating thread for device emulator
2021-10-17 12:00:21 00000000 s (main) ERROR: can't create client work thread (errno=11 Resource temporarily unavailable)
2021-10-17 12:00:21 00000000 s (work) ERROR: can't create thread for reader (errno=11 Resource temporarily unavailable)
2021-10-17 12:00:21 00000000 s (reader) sharing1 [cccam] creating thread for device s1.xtr7.xyz
2021-10-17 12:00:21 00000000 s (main) ERROR: can't create client work thread (errno=11 Resource temporarily unavailable)
2021-10-17 12:00:21 00000000 s (work) ERROR: can't create thread for reader (errno=11 Resource temporarily unavailable)
2021-10-17 12:00:21 00000000 s (reader) sharing2 [cccam] creating thread for device s2.xtr7.xyz
2021-10-17 12:00:21 00000000 s (main) ERROR: can't create client work thread (errno=11 Resource temporarily unavailable)
2021-10-17 12:00:21 00000000 s (work) ERROR: can't create thread for reader (errno=11 Resource temporarily unavailable)
2021-10-17 12:00:21 00000000 s (reader) sharing3 [cccam] creating thread for device s3.xtr77.xyz
2021-10-17 12:00:21 00000000 s (main) ERROR: can't create client work thread (errno=11 Resource temporarily unavailable)
2021-10-17 12:00:21 00000000 s (work) ERROR: can't create thread for reader (errno=11 Resource temporarily unavailable)
2021-10-17 12:00:21 00000000 s (reader) sharing4 [cccam] creating thread for device s4.xtr7.xyz
2021-10-17 12:00:21 00000000 s (main) ERROR: can't create client work thread (errno=11 Resource temporarily unavailable)
2021-10-17 12:00:21 00000000 s (work) ERROR: can't create thread for reader (errno=11 Resource temporarily unavailable)
2021-10-17 12:00:21 00000000 s (reader) sharing5 [cccam] creating thread for device s5.xtr77.xyz
2021-10-17 12:00:21 00000000 s (main) ERROR: can't create client work thread (errno=11 Resource temporarily unavailable)
2021-10-17 12:00:21 00000000 s (work) ERROR: can't create thread for reader (errno=11 Resource temporarily unavailable)
2021-10-17 12:00:21 00000000 s (reader) sharing6 [cccam] creating thread for device s6.xtr77.xyz
2021-10-17 12:00:21 00000000 s (main) ERROR: can't create client work thread (errno=11 Resource temporarily unavailable)
2021-10-17 12:00:21 00000000 s (work) ERROR: can't create thread for reader (errno=11 Resource temporarily unavailable)
2021-10-17 12:00:21 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2021-10-17 12:00:21 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2021-10-17 12:00:21 00000000 s (anticasc) anti cascading disabled
2021-10-17 12:00:21 00000000 s (gbox) local gbox failed init
2021-10-17 12:00:21 00000000 s (main) ERROR: can't create card poll thread (errno=11 Resource temporarily unavailable)
2021-10-17 12:00:21 6F341AA8 c (client) plain dvbapi-client granted (dvbapiau, au=auto (9 reader))
2021-10-17 12:00:21 6F341AA8 c (dvbapi) dvbapi channelcache loaded from /var/tuxbox/config/ncam.ccache
2021-10-17 12:00:21 6F341AA8 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0 maximum number of filters is 64 (ncam limit is 64)
2021-10-17 12:00:21 6F341AA8 c (dvbapi) Detected /dev/dvb/adapter0/ca0 device, total available descramblers: 8
2021-10-17 12:00:22 6F341AA8 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1830 ECM_PID: 1CAF PROVID: 000000
2021-10-17 12:00:22 6F341AA8 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1843 ECM_PID: 19AF PROVID: 000000
2021-10-17 12:00:22 6F341AA8 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 09C4 ECM_PID: 1BAF PROVID: 000000
2021-10-17 12:00:22 6F341AA8 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 098C ECM_PID: 1AAF PROVID: 000000
2021-10-17 12:00:22 6F341AA8 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 1860 ECM_PID: 1EAF PROVID: 000000
2021-10-17 12:00:22 6F341AA8 c (dvbapi) Demuxer 0 ecmpid 5 CAID: 186A ECM_PID: 1DAF PROVID: 000000
2021-10-17 12:00:22 6F341AA8 c (dvbapi) Demuxer 0 ecmpid 6 CAID: 0500 ECM_PID: 1DE7 PROVID: 051900
2021-10-17 12:00:22 6F341AA8 c (dvbapi) Demuxer 0 ecmpid 7 CAID: 098D ECM_PID: 18AF PROVID: 000000
2021-10-17 12:00:22 6F341AA8 c (dvbapi) Demuxer 0 ecmpid 8 CAID: 186D ECM_PID: 1DE6 PROVID: 000000
2021-10-17 12:00:22 6F341AA8 c (dvbapi) Demuxer 0 ecmpid 9 CAID: 1842 ECM_PID: 1CE5 PROVID: 000000
2021-10-17 12:00:22 6F341AA8 c (dvbapi) Demuxer 0 ecmpid 10 CAID: 4B64 ECM_PID: 1CE5 PROVID: 000000
2021-10-17 12:00:22 6F341AA8 c (dvbapi) Demuxer 0 ecmpid 11 CAID: 4AF4 ECM_PID: 17AF PROVID: 000001
2021-10-17 12:00:22 6F341AA8 c (dvbapi) Demuxer 0 ecmpid 12 CAID: 06E2 ECM_PID: 1DE8 PROVID: 000000
2021-10-17 12:00:22 6F341AA8 c (dvbapi) Demuxer 0 found 13 ECM pids and 5 STREAM pids in CA PMT
2021-10-17 12:00:22 6F341AA8 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2021-10-17 12:00:25 6F341AA8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2021-10-17 12:01:34 6F341AA8 c (-) -- Skipped 13 duplicated log lines --
2021-10-17 12:02:35 6F341AA8 c (-) -- Skipped 12 duplicated log lines --
2021-10-17 12:03:35 6F341AA8 c (-) -- Skipped 12 duplicated log lines --
 

fairman

كبير مراقبي فريق الدريم بوكس
طاقم الإدارة
إنضم
8 جانفي 2012
المشاركات
28.008
مستوى التفاعل
113.131
As I said ... Don't send log like this
change ncam.log to ncam.txt and upload it in next time

Anyway >>>> try this file
download > extract > send to /usr/bin > give chomd 755 > do restart enigma2
Then test it with same config file in first post for OE2.5 don't use file for OE2.0

Selection_001.png


Don't forget to send log as txt file not copy past lines if you get same issue
 
التعديل الأخير:
أعلى