ncamaddons

أبوياسين الجزائري

نجم المنتدى
عضو قيم
إنضم
27 جانفي 2008
المشاركات
2.306
مستوى التفاعل
11.706
السلام عليكم ورحمة الله تعالى
أولا أتقدم بالشكر والتحية الخالصتين لأخوي حسين وفرج
هذا عمل يخص Ncam
أقدم لكم هذه النسخة
enigma2-plugin-extensions-ncamaddons
يمكنكم من خلاله
تحميل الملفات التي يطرحها دائما اخونا حسين
سرفرات مجانية
يجب تحديد البيانات ip & port
حتى يعمل معكم state of server ncam

enigma2-plugin-extensions-ncamaddons

ملاحظة بسيطة
أرجو أن لا يوضع الملف في المرفقات
هكذا يتجدد الملف برابط واحد

إذا لاحظت رسالة عند استعمال Free Cccam To Ncam Emu

يجب تسطيب curl
كود:
opkg update; opkg install curl

عملية تثبيت ملف deb بعد تحميل الملف من المرفقات وفك الضغط عن zip إرسال الملف الى tmp/ ثم هذا الأمر
كود:
apt update
dpkg -i --force-overwrite /tmp/*.deb
apt-get install --yes --force-yes --assume-yes -f

 

المرفقات

  • I1.jpg
    I1.jpg
    103 KB · المشاهدات: 259
  • I2.jpg
    I2.jpg
    120 KB · المشاهدات: 259
  • I3.jpg
    I3.jpg
    125,4 KB · المشاهدات: 243
  • I4.jpg
    I4.jpg
    102,9 KB · المشاهدات: 244
  • I5.jpg
    I5.jpg
    98 KB · المشاهدات: 253
  • enigma2-plugin-extensions-ncamaddons-1.3-r0-deb.zip
    1,9 MB · المشاهدات: 199
التعديل الأخير بواسطة المشرف:
السلام عليكم اخونا و حبيبنا ابو ياسين من فضلك ما دور هذا البلوغين

الصورة الاخيرة تعطيك الاجابة
تحديث ملف الايمو ncam عند صدور تحديثات جديدة من طرف الاخ حسين
مباشرة دون تثبيت الايمو كل مرة ...
تحميل سرفرات مجانية ...متابعة حالة السرفرات وخصائص اخرى يمكن استكشافها بعد استخدام البلجن...
 
يعطيك الف عافيه ياغالي .....
للاسف عند الضغط على SETUP وهاي الكراش لوغو:
كود:
BlackHole Enigma2 crash log

crashdate=Wed Nov 21 19:13:06 2018
compiledate=Oct 26 2018
skin=Pal.5.FullHD/skin.xml
sourcedate=2018-10-25
branch=develop
rev=d5eb1d9
component=Enigma2

stbmodel=dm800
kernelcmdline=root=/dev/mtdblock3 rootfstype=jffs2 rw console=ttyS0,115200
nimsockets=NIM Socket 0:
imageversion=box_type=Dreambox
imageissue=[0;35m        [1;32m     .--.


lliteEquipmentControl] ret 15000, score old 0
[eDVBSatelliteEquipmentControl] score new 15000
[eDVBSatelliteEquipmentControl] lnb 1 found
[eDVBSatelliteEquipmentControl] sat 3520 found
[eDVBSatelliteEquipmentControl] ret1 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 15000
[eDVBSatelliteEquipmentControl] score new 15000
[eDVBSatelliteEquipmentControl] final score 14962
[eDVBFrontend0] opening frontend
[eDVBFrontend0] tune
[eDVBSatelliteEquipmentControl] direct_connected 1
[eDVBSatelliteEquipmentControl] canTune 1
[eDVBSatelliteEquipmentControl] lnb 0 found
[eDVBSatelliteEquipmentControl] sat 3520 found
[eDVBSatelliteEquipmentControl] ret1 15000
[eDVBSatelliteEquipmentControl] ret5 15000
[eDVBSatelliteEquipmentControl] ret 15000, score old 0
[eDVBSatelliteEquipmentControl] score new 15000
[eDVBSatelliteEquipmentControl] lnb 1 found
[eDVBSatelliteEquipmentControl] sat 3520 found
[eDVBSatelliteEquipmentControl] ret1 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 15000
[eDVBSatelliteEquipmentControl] score new 15000
[eDVBSatelliteEquipmentControl] final score 14962
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend0] prepare_sat System 0 Freq 11471000 Pol 1 SR 27500000 INV 2 FEC 4 orbpos 3520 system 0 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0
[eDVBFrontend0] tuning to 1721 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:6:3B:800:DC00000:0:0:0:
[eDVBChannel] getDemux cap=00
[eDVBResourceManager] allocate demux cap=00
[eDVBResourceManager] allocating demux adapter=0, demux=0, source=-1 fesource=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[Avahi] watch activated: 0x1
[Console] finished: ('/sbin/ip', '/sbin/ip', '-o', 'addr', 'show', 'dev', 'eth0')
[Console] command: route -n | grep eth0
[eConsoleAppContainer] Starting /bin/sh
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eDVBFrontend0] set static current limiting
[Console] finished: route -n | grep eth0
192.168
0.0.0.0
nameservers: [[192, 168, 0, 1]]
read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 0, 100], 'up': True, 'mac': '00:09:34:29:41:0e', 'dhcp': True, 'bcast': [192, 168, 0, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 0, 1]}}
SerienRecorder plugin not found
EPG Refresh Plugin not found
[OpenWebif] no plugins to load
[OpenWebif] started on 80
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] Registered dm800 (_http._tcp) on dm800:80
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eDVBFrontend0] invalidate current switch params
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eDVBFrontend0] setVoltage 1
[Avahi] timeout elapsed
[Avahi] Resolving service 'dm800' of type '_e2stream._tcp'
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[eDVBFrontend0] sleep 10ms
[Avahi] timeout elapsed
[Avahi] Resolving service 'dm800' of type '_e2stream._tcp'
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[eDVBFrontend0] set sequence pos 3
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eDVBFrontend0] update current switch params
[Avahi] timeout elapsed
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[eDVBFrontend0] startTuneTimeout 5000
[Avahi] timeout elapsed
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] sleep 500ms
[eDVBFrontend0] fe event: status 1, inversion off, m_tuning 2
[eDVBFrontend0] fe event: status 1f, inversion off, m_tuning 3
[eDVBChannel] OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x14da9d0 running
[eDVBChannel] getDemux cap=00
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=20
[eEPGCache] channel 0x14da9d0 running
[eDVBChannel] getDemux cap=00
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBResourceManager] stop release channel timer
[eDVBChannel] getDemux cap=01
[eDVBResourceManager] allocate demux cap=01
[eDVBResourceManager] allocating shared demux adapter=0, demux=0, source=0
[eDVBServicePMTHandler] ok ... now we start!!
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
[eDVBServicePlay] have 1 video stream(s) (0259), and 1 audio stream(s) (025a), and the pcr pid is 0259, and the text pid is ffffffff
[eDVBChannel] getDemux cap=01
[eEPGCache] next update in 2 sec
[eTSMPEGDecoder] decoder state: play, vpid=0259, apid=025a
[eDVBPCR0] DMX_SET_PES_FILTER pid=0x0259 ok
[eDVBPCR0] DEMUX_START ok
[eDVBAudio0] DMX_SET_PES_FILTER pid=0x025a ok
[eDVBAudio0] DEMUX_START ok
[eDVBAudio0] AUDIO_SET_BYPASS bypass=1 ok
[eDVBAudio0] AUDIO_PAUSE ok
[eDVBAudio0] AUDIO_PLAY ok
[eDVBVideo] Video Device: /dev/dvb/adapter0/video0
[eDVBVideo] demux device: /dev/dvb/adapter0/demux0
[eDVBVideo0] VIDEO_SET_STREAMTYPE 0 - ok
[eDVBVideo0] DMX_SET_PES_FILTER pid=0x0259 ok
[eDVBVideo0] DEMUX_START ok
[eDVBVideo0] VIDEO_FREEZE ok
[eDVBVideo0] VIDEO_PLAY ok
[eDVBVideo0] VIDEO_SLOWMOTION 0 ok
[eDVBVideo0] VIDEO_FAST_FORWARD 0 ok
[eDVBVideo0] VIDEO_CONTINUE ok
[eDVBAudio0] AUDIO_CONTINUE ok
[eDVBAudio0] AUDIO_CHANNEL_SELECT 0 ok
[eDVBTeletextParser] Starting!
[eDVBTeletextParser] disable teletext subtitles page ffffffffffffffff (und)
[eDVBPESReader] Created. Opening demux
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBTeletextParser] created teletext subtitle PES reader!
[eDVBPESReader] Created. Opening demux
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBTeletextParser] starting PES reader on pid=ffffffff
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
[eDVBCAService] new service 1:0:1:6:3B:800:DC00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:6:3B:800:DC00000:0:0:0:
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=18
RemovePopup, id = ZapError
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBFrontend0] set dynamic current limiting
[eEPGCache] start caching events(1542820372)
[eDVBSectionReader] DMX_SET_FILTER pid=3842
[eDVBSectionReader] DMX_SET_FILTER pid=3003
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=5000
[eDVBSectionReader] DMX_SET_FILTER pid=5000
[eDVBSectionReader] DMX_SET_FILTER pid=57
[Avahi] watch activated: 0x1
[Avahi] avahi_timeout_update
[eDVBLocalTimerHandler] diff is -6
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 19:12:47
[eDVBLocalTimerHandler] m_time_difference is -6
[eDVBLocalTimerHandler] set Linux Time
[eDVBChannel] getDemux cap=00
[eDVBVideo0] VIDEO_GET_EVENT SIZE_CHANGED 720x576 aspect 3
[eDVBVideo0] VIDEO_GET_EVENT PROGRESSIVE_CHANGED 0
[eDVBServicePMTHandler] PATready
[eDVBServicePMTHandler] use pmtpid 0258 for service_id 0006
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=600
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=200
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
[eDVBServicePlay] have 1 video stream(s) (0259), and 1 audio stream(s) (025a), and the pcr pid is 0259, and the text pid is ffffffff
[eTSMPEGDecoder] decoder state: play, vpid=0259, apid=025a
[eDVBVideo0] VIDEO_SLOWMOTION 0 ok
[eDVBVideo0] VIDEO_FAST_FORWARD 0 ok
[eDVBVideo0] VIDEO_CONTINUE ok
[eDVBAudio0] AUDIO_CONTINUE ok
[eDVBCIInterfaces] gotPMT
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=600
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=300
[ePicLoad] thread failed to modify scheduling priority (Success)
[ePicLoad] decode picture... /usr/share/enigma2/Pal.5.FullHD/WeatherIcon/29.png
[EXIF] getting exif from PNG
[ePicLoad] thread failed to modify scheduling priority (Success)
[ePicLoad] decode picture... /usr/share/enigma2/Pal.5.FullHD/WeatherIcon/29.png
[EXIF] getting exif from PNG
[ePicLoad] thread failed to modify scheduling priority (Success)
[ePicLoad] decode picture... /usr/share/enigma2/Pal.5.FullHD/WeatherIcon/4.png
[EXIF] getting exif from PNG
[ePicLoad] thread failed to modify scheduling priority (Success)
[ePicLoad] decode picture... /usr/share/enigma2/Pal.5.FullHD/WeatherIcon/11.png
[EXIF] getting exif from PNG
[ePicLoad] thread failed to modify scheduling priority (Success)
[ePicLoad] decode picture... /usr/share/enigma2/Pal.5.FullHD/WeatherIcon/30.png
[EXIF] getting exif from PNG
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=400
[eDVBServicePMTHandler] sdt update done!
[ePicLoad] <format not supported>
[ActionMap] Keymap 'InfobarSubserviceSelectionActions' -> Action = 'DeliteGpshow'
[gAccel] alloc failed
[gSurface] ERROR: accelAlloc failed
[gAccel] alloc failed
[gSurface] ERROR: accelAlloc failed
[ePNG] couldn't open /usr/lib/enigma2/python/Plugins/Extensions/NcamAddons/NcamAddons.png
[Skin] Processing screen: DeliteGreenPanel
[gAccel] alloc failed
[gSurface] ERROR: accelAlloc failed
[Skin] Processing screen: SimpleSummary
[eEPGCache] abort non avail netmed schedule reading
[eEPGCache] abort non avail netmed schedule other reading
[eEPGCache] abort non avail FreeSat schedule_other reading
[eEPGCache] abort non avail viasat reading
[eEPGCache] nownext finished(1542820375)
[ActionMap] Keymap 'WizardActions' -> Unknown action 'right'! (Typo in keymap?)
[ActionMap] Keymap 'WizardActions' -> Unknown action 'down'! (Typo in keymap?)
[ActionMap] Keymap 'WizardActions' -> Unknown action 'down'! (Typo in keymap?)
[ActionMap] Keymap 'WizardActions' -> Unknown action 'down'! (Typo in keymap?)
[ActionMap] Keymap 'WizardActions' -> Action = 'ok'
 0.Ncam Bin Updat
 1.Free Cccam To Ncam Emu
 2.State Of Server Ncam
 3.Setup
 4.About
 5.New
 6.Updat Plugin
[Skin] Processing screen: NcamAddonsScreenn
warning, skin is missing element ecminfo in <class 'Plugins.Extensions.NcamAddons.plugin.NcamAddonsScreenn'>
[gAccel] alloc failed
[gSurface] ERROR: accelAlloc failed
warning, skin is missing element info_15 in <class 'Plugins.Extensions.NcamAddons.plugin.NcamAddonsScreenn'>
[gAccel] alloc failed
[gSurface] ERROR: accelAlloc failed
[Skin] Processing screen: SimpleSummary
[eTextPara] unicode U+fe8e not present
[eTextPara] unicode U+fe8c not present
[eTextPara] unicode U+fef4 not present
[eTextPara] unicode U+feb7 not present
[eTextPara] unicode U+feb2 not present
[eTextPara] unicode U+fee4 not present
[eTextPara] unicode U+fee0 not present
[eTextPara] unicode U+fe97 not present
[eTextPara] unicode U+fefb not present
[eTextPara] unicode U+feff not present
[eTextPara] unicode U+fe95 not present
[eTextPara] unicode U+fe8e not present
[eTextPara] unicode U+fed4 not present
[eTextPara] unicode U+fee0 not present
[eTextPara] unicode U+fee3 not present
[eTextPara] unicode U+fede not present
[eTextPara] unicode U+fef4 not present
[eTextPara] unicode U+fee4 not present
[eTextPara] unicode U+fea4 not present
[eTextPara] unicode U+fe97 not present
[eTextPara] unicode U+fe94 not present
[eTextPara] unicode U+fee0 not present
[eTextPara] unicode U+fecc not present
[eTextPara] unicode U+fed4 not present
[eTextPara] unicode U+fee3 not present
[eTextPara] unicode U+feae not present
[eTextPara] unicode U+fef4 not present
[eTextPara] unicode U+fecf not present
[ActionMap] Keymap 'DirectionActions' -> Action = 'down'
[eTextPara] unicode U+fe94 not present
[eTextPara] unicode U+fef4 not present
[eTextPara] unicode U+fee7 not present
[eTextPara] unicode U+fe8e not present
[eTextPara] unicode U+fea0 not present
[eTextPara] unicode U+fee3 not present
[eTextPara] unicode U+fe95 not present
[eTextPara] unicode U+fe8d not present
[eTextPara] unicode U+feae not present
[eTextPara] unicode U+fed3 not present
[eTextPara] unicode U+feae not present
[eTextPara] unicode U+feb3 not present
[ActionMap] Keymap 'DirectionActions' -> Unknown action 'downUp'! (Typo in keymap?)
[ActionMap] Keymap 'DirectionActions' -> Action = 'down'
[eTextPara] unicode U+fe95 not present
[eTextPara] unicode U+fe8d not present
[eTextPara] unicode U+feae not present
[eTextPara] unicode U+fed3 not present
[eTextPara] unicode U+feae not present
[eTextPara] unicode U+feb4 not present
[eTextPara] unicode U+fedf not present
[eTextPara] unicode U+fe8d not present
[eTextPara] unicode U+fe95 not present
[eTextPara] unicode U+fefb not present
[eTextPara] unicode U+feff not present
[eTextPara] unicode U+fe8e not present
[eTextPara] unicode U+fea3 not present
[ActionMap] Keymap 'DirectionActions' -> Unknown action 'downUp'! (Typo in keymap?)
[ActionMap] Keymap 'DirectionActions' -> Action = 'down'
[eTextPara] unicode U+fede not present
[eTextPara] unicode U+fef4 not present
[eTextPara] unicode U+fedf not present
[eTextPara] unicode U+fea9 not present
[eTextPara] unicode U+feed not present
[eTextPara] unicode U+feed not present
[eTextPara] unicode U+fe94 not present
[eTextPara] unicode U+fe8c not present
[eTextPara] unicode U+fef4 not present
[eTextPara] unicode U+feec not present
[eTextPara] unicode U+fe97 not present
[ActionMap] Keymap 'DirectionActions' -> Unknown action 'downUp'! (Typo in keymap?)
[ActionMap] Keymap 'SetupActions' -> Action = 'ok'
3
loadSkin: Screen already defined elsewhere: NcamAddonsScreenn
loadSkin: Screen already defined elsewhere: NcamUpdat_About
loadSkin: Screen already defined elsewhere: VirtualKeyBoard_1
loadSkin: Screen already defined elsewhere: MessageBoxNcam
loadSkin: Screen already defined elsewhere: ScreenNcamUpdatSetup
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 49, in action
  File "/usr/lib/enigma2/python/Plugins/Extensions/NcamAddons/plugin.py", line 216, in ok
  File "/usr/lib/enigma2/python/Plugins/Extensions/NcamAddons/plugin.py", line 186, in settings
  File "/usr/lib/enigma2/python/mytest.py", line 299, in open
    dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
  File "/usr/lib/enigma2/python/mytest.py", line 242, in instantiateDialog
    return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
  File "/usr/lib/enigma2/python/mytest.py", line 259, in doInstantiateDialog
    dlg = screen(self, *arguments, **kwargs)
  File "/usr/lib/enigma2/python/Plugins/Extensions/NcamAddons/Outils/NcamUpdatSetup.py", line 81, in __init__
  File "/usr/lib/enigma2/python/Plugins/Extensions/NcamAddons/Componen/ConfigListNcam.py", line 134, in __init__
  File "/usr/lib/enigma2/python/Plugins/Extensions/NcamAddons/Componen/ConfigListNcam.py", line 14, in __init__
TypeError: 'int' object is not iterable
[ePyObject] (CallObject(<bound method ActionMap.action of <Components.ActionMap.ActionMap instance at 0x315f61c0>>,('SetupActions', 'ok')) failed)


dmesg

<4>[  846.904000] stop pcr0 on dmx 0 pid:d53
<4>[  846.913000] stop audio on dmx 0 pid:d54
<4>[  846.917000] audio: xpt stop(1)
<4>[  846.920000] audio: decoder stop
<4>[  846.950000] bcm_audio_channel_stop(1) done
<4>[  846.956000] stop video0 on dmx 0 pid:d53
<4>[  846.963000] VIDEO0: stop decode
<4>[  846.966000] no decoder left in sync handling so disable xpt_sync
<4>[  847.017000] alps_bsbe2 is in powersave mode now
<4>[  847.087000] VIDEO0: set blank to 0
<4>[  847.092000] sync is off so we enable it
<4>[  847.096000] playback!
<4>[  847.099000] total video delay: 0 (0 ms)
<4>[  847.145000] VIDEO0: start decode
<4>[  847.188000] flush video decoder
<4>[  847.191000] VIDEO0 use saved pts 0xb9db0e76 (ret 0)
<4>[  847.352000] VIDEO0: first pts 0x0
<4>[  847.355000] VIDEO0: resolution changed (1280 720)
<4>[  847.360000] VIDEO0: aspect changed 3
<4>[  847.365000] VIDEO:0 scale mode is enabled... no aspect handling active!!
<4>[  847.424000] VIDEO0: set blank to 0
<4>[  847.429000] VIDEO0: stop decode
<4>[  847.434000] VIDEO0: set blank to 0
<4>[  847.438000] no decoder left in sync handling so disable xpt_sync
<4>[  848.112000] VIDEO0: progressive changed (1)
<3>[  851.114000] bcm_accel: invalid opcode! 00000080
<6>[  851.125000] bcmfb: enable manual blit
<4>[  854.268000] alps_bsbe2 is in normal mode now
<4>[  854.436000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[  854.552000] set current avs auto aspect to 16:9
<4>[  854.557000] disable wss on display 0
<4>[  854.560000] set wss 7 on display 1
<4>[  854.564000] set sb to 3(1)
<4>[  855.755000] 488960 ms: 100
<4>[  855.808000] 50 ms: 0
<4>[  857.279000] alps_bsbe2 is in powersave mode now
<4>[  860.320000] 4510 ms: 0
<4>[  860.492000] 170 ms: 4
<4>[  860.557000] 62 ms: 4
<4>[  860.564000] 5 ms: 4
<4>[  860.722000] 156 ms: 4
<4>[  862.228000] 1503 ms: 5
<4>[  862.281000] 51 ms: 6
<4>[  862.289000] 5 ms: 6
<4>[  862.297000] 5 ms: 6
<4>[  877.087000] 14788 ms: 6
<4>[  877.095000] 5 ms: 21
<4>[  877.307000] 209 ms: 21
<4>[  877.594000] 284 ms: 21
<4>[  877.601000] 4 ms: 22
<4>[  877.644000] 40 ms: 22
<4>[  877.653000] 6 ms: 22
<4>[  877.660000] 5 ms: 22
<4>[  878.334000] 671 ms: 22
<4>[  878.463000] 126 ms: 22
<4>[  878.587000] 121 ms: 22
<4>[  879.024000] 434 ms: 23
<4>[  879.031000] 5 ms: 23
<4>[  879.605000] 571 ms: 23
<4>[  880.340000] 733 ms: 24
<4>[  880.417000] 74 ms: 25
<4>[  880.539000] 120 ms: 25
<4>[  880.545000] 3 ms: 25
<4>[  880.555000] 7 ms: 25
<4>[  880.599000] 41 ms: 25
<4>[  899.157000] 18556 ms: 25
<4>[  899.165000] 5 ms: 43
<4>[  899.537000] 370 ms: 43
<4>[  899.543000] 4 ms: 43
<4>[  899.696000] 151 ms: 43
<4>[  899.707000] 8 ms: 43
<4>[  899.716000] 7 ms: 43
<4>[  899.734000] 15 ms: 43
<4>[  899.786000] 50 ms: 43
<4>[  899.796000] 7 ms: 43
<4>[  900.323000] 525 ms: 43
<4>[  900.659000] 333 ms: 45
<4>[  900.754000] set current avs auto aspect to 16:9
<4>[  900.759000] disable wss on display 0
<4>[  900.762000] set wss 7 on display 1
<4>[  900.766000] set sb to 3(1)
<4>[  900.771000] set current avs auto aspect to 16:9
<4>[  900.777000] disable wss on display 0
<4>[  900.781000] set wss 7 on display 1
<4>[  900.784000] set sb to 3(1)
<4>[  900.792000] disable wss on display 0
<4>[  900.797000] set wss 7 on display 1
<4>[  900.803000] set input to 0
<4>[  900.805000] set fb to 2(0)
<4>[  900.809000] set current avs auto aspect to 16:9
<4>[  900.814000] disable wss on display 0
<4>[  900.818000] set wss 7 on display 1
<4>[  900.821000] set sb to 3(1)
<4>[  900.837000] set ac3 to downmix
<4>[  900.846000] set aac to downmix
<4>[  900.871000] set mute 0 (111) 0
<4>[  900.880000] 219 ms: 45
<4>[  900.919000] 37 ms: 45
<4>[  901.802000] 880 ms: 45
<4>[  902.136000] 331 ms: 46
<4>[  903.243000] 1105 ms: 46
<4>[  903.336000] 91 ms: 48
<4>[  903.405000] 66 ms: 48
<4>[  903.439000] 31 ms: 48
<4>[  903.446000] 5 ms: 48
<4>[  903.455000] 7 ms: 48
<4>[  909.303000] set current avs auto aspect to 16:9
<4>[  909.307000] disable wss on display 0
<4>[  909.311000] set wss 7 on display 1
<4>[  909.316000] set sb to 3(1)
<4>[  909.325000] set current avs auto aspect to 16:9
<4>[  909.329000] disable wss on display 0
<4>[  909.334000] set wss 7 on display 1
<4>[  909.338000] set sb to 3(1)
<4>[  909.345000] disable wss on display 0
<4>[  909.349000] set wss 7 on display 1
<4>[  909.357000] set current avs auto aspect to 16:9
<4>[  909.362000] disable wss on display 0
<4>[  909.366000] set wss 7 on display 1
<4>[  909.369000] set sb to 3(1)
<4>[  909.384000] set current avs auto aspect to 16:9
<4>[  909.389000] disable wss on display 0
<4>[  909.393000] set wss 7 on display 1
<4>[  909.397000] set sb to 3(1)
<4>[  909.403000] set current avs auto aspect to 16:9
<4>[  909.408000] disable wss on display 0
<4>[  909.412000] set wss 7 on display 1
<4>[  909.416000] set sb to 3(1)
<4>[  909.424000] disable wss on display 0
<4>[  909.428000] set wss 7 on display 1
<4>[  909.436000] set current avs auto aspect to 16:9
<4>[  909.441000] disable wss on display 0
<4>[  909.445000] set wss 7 on display 1
<4>[  909.448000] set sb to 3(1)
<4>[  909.470000] set current avs auto aspect to 16:9
<4>[  909.476000] disable wss on display 0
<4>[  909.480000] set wss 7 on display 1
<4>[  909.483000] set sb to 3(1)
<4>[  909.493000] set current avs auto aspect to 16:9
<4>[  909.498000] disable wss on display 0
<4>[  909.502000] set wss 7 on display 1
<4>[  909.505000] set sb to 3(1)
<4>[  909.512000] disable wss on display 0
<4>[  909.516000] set wss 7 on display 1
<4>[  909.525000] set current avs auto aspect to 16:9
<4>[  909.529000] disable wss on display 0
<4>[  909.534000] set wss 7 on display 1
<4>[  909.538000] set sb to 3(1)
<4>[  909.554000] set current avs auto aspect to 16:9
<4>[  909.559000] disable wss on display 0
<4>[  909.562000] set wss 7 on display 1
<4>[  909.566000] set sb to 3(1)
<4>[  909.573000] set current avs auto aspect to 16:9
<4>[  909.578000] disable wss on display 0
<4>[  909.582000] set wss 7 on display 1
<4>[  909.585000] set sb to 3(1)
<4>[  909.594000] disable wss on display 0
<4>[  909.598000] set wss 7 on display 1
<4>[  909.605000] set current avs auto aspect to 16:9
<4>[  909.609000] disable wss on display 0
<4>[  909.614000] set wss 7 on display 1
<4>[  909.617000] set sb to 3(1)
<4>[  909.634000] set current avs auto aspect to 16:9
<4>[  909.639000] disable wss on display 0
<4>[  909.642000] set wss 7 on display 1
<4>[  909.646000] set sb to 3(1)
<4>[  909.654000] set current avs auto aspect to 16:9
<4>[  909.659000] disable wss on display 0
<4>[  909.663000] set wss 7 on display 1
<4>[  909.667000] set sb to 3(1)
<4>[  909.683000] set current avs auto aspect to 16:9
<4>[  909.688000] disable wss on display 0
<4>[  909.692000] set wss 7 on display 1
<4>[  909.696000] set sb to 3(1)
<4>[  909.703000] set current avs auto aspect to 16:9
<4>[  909.708000] disable wss on display 0
<4>[  909.711000] set wss 7 on display 1
<4>[  909.716000] set sb to 3(1)
<4>[  909.722000] disable wss on display 0
<4>[  909.726000] set wss 7 on display 1
<4>[  909.735000] set current avs auto aspect to 16:9
<4>[  909.740000] disable wss on display 0
<4>[  909.744000] set wss 7 on display 1
<4>[  909.747000] set sb to 3(1)
<4>[  934.957000] 31500 ms: 48
<4>[  935.651000] 692 ms: 80
<4>[  955.997000] 20342 ms: 80
<4>[  956.206000] 206 ms: 99
<4>[  956.228000] 20 ms: 99
<4>[  956.236000] 5 ms: 99
<4>[  957.563000] alps_bsbe2 is in normal mode now
<7>[  960.651000] unknown fec code: 0
<4>[  960.807000] start pcr0 on dmx 0 pid:259 index 1
<4>[  960.815000] start audio on dmx 0 pid:25a
<4>[  960.819000] audio xpt start
<4>[  960.822000] sync is off so we enable it
<4>[  960.826000] demux-index 0 pcr0pid 259
<4>[  960.830000] using 1 as pcr0 pidchannel
<4>[  960.838000] MPEG
<4>[  960.841000] audio: decoder start 0
<4>[  960.859000] video delay 0 (0 ms)
<4>[  960.862000] total video delay: 0 (0 ms)
<4>[  960.869000] start video0 on dmx 0 pid:259
<4>[  960.873000] total video delay: 0 (0 ms)
<4>[  960.877000] ch0: lock
<4>[  960.892000] VIDEO0: start decode
<4>[  960.956000] RAP first pts 0x6476ad30, stc 0x64769b4c, pcr valid
<4>[  961.064000] RAP sampling rate info isr (48000)
<4>[  961.069000] eBitRateChange Isr.. set source_changed_event!
<4>[  961.075000] eModeChange Isr.. set source_changed_event!
<4>[  961.254000] VIDEO0: first pts 0x647783ba
<4>[  961.258000] VIDEO0: resolution changed (720 576)
<4>[  961.413000] enable tsm0
<4>[  961.894000] VIDEO0: progressive changed (0)
 
يعطيك الف عافيه ياغالي .....
للاسف عند الضغط على SETUP وهاي الكراش لوغو:
كود:
BlackHole Enigma2 crash log

crashdate=Wed Nov 21 19:13:06 2018
compiledate=Oct 26 2018
skin=Pal.5.FullHD/skin.xml
sourcedate=2018-10-25
branch=develop
rev=d5eb1d9
component=Enigma2

stbmodel=dm800
kernelcmdline=root=/dev/mtdblock3 rootfstype=jffs2 rw console=ttyS0,115200
nimsockets=NIM Socket 0:
imageversion=box_type=Dreambox
imageissue=[0;35m        [1;32m     .--.


lliteEquipmentControl] ret 15000, score old 0
[eDVBSatelliteEquipmentControl] score new 15000
[eDVBSatelliteEquipmentControl] lnb 1 found
[eDVBSatelliteEquipmentControl] sat 3520 found
[eDVBSatelliteEquipmentControl] ret1 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 15000
[eDVBSatelliteEquipmentControl] score new 15000
[eDVBSatelliteEquipmentControl] final score 14962
[eDVBFrontend0] opening frontend
[eDVBFrontend0] tune
[eDVBSatelliteEquipmentControl] direct_connected 1
[eDVBSatelliteEquipmentControl] canTune 1
[eDVBSatelliteEquipmentControl] lnb 0 found
[eDVBSatelliteEquipmentControl] sat 3520 found
[eDVBSatelliteEquipmentControl] ret1 15000
[eDVBSatelliteEquipmentControl] ret5 15000
[eDVBSatelliteEquipmentControl] ret 15000, score old 0
[eDVBSatelliteEquipmentControl] score new 15000
[eDVBSatelliteEquipmentControl] lnb 1 found
[eDVBSatelliteEquipmentControl] sat 3520 found
[eDVBSatelliteEquipmentControl] ret1 10000
[eDVBSatelliteEquipmentControl] ret5 10000
[eDVBSatelliteEquipmentControl] ret 10000, score old 15000
[eDVBSatelliteEquipmentControl] score new 15000
[eDVBSatelliteEquipmentControl] final score 14962
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend0] prepare_sat System 0 Freq 11471000 Pol 1 SR 27500000 INV 2 FEC 4 orbpos 3520 system 0 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0
[eDVBFrontend0] tuning to 1721 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:6:3B:800:DC00000:0:0:0:
[eDVBChannel] getDemux cap=00
[eDVBResourceManager] allocate demux cap=00
[eDVBResourceManager] allocating demux adapter=0, demux=0, source=-1 fesource=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[Avahi] watch activated: 0x1
[Console] finished: ('/sbin/ip', '/sbin/ip', '-o', 'addr', 'show', 'dev', 'eth0')
[Console] command: route -n | grep eth0
[eConsoleAppContainer] Starting /bin/sh
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eDVBFrontend0] set static current limiting
[Console] finished: route -n | grep eth0
192.168
0.0.0.0
nameservers: [[192, 168, 0, 1]]
read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 0, 100], 'up': True, 'mac': '00:09:34:29:41:0e', 'dhcp': True, 'bcast': [192, 168, 0, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 0, 1]}}
SerienRecorder plugin not found
EPG Refresh Plugin not found
[OpenWebif] no plugins to load
[OpenWebif] started on 80
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] Registered dm800 (_http._tcp) on dm800:80
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eDVBFrontend0] invalidate current switch params
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eDVBFrontend0] setVoltage 1
[Avahi] timeout elapsed
[Avahi] Resolving service 'dm800' of type '_e2stream._tcp'
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[eDVBFrontend0] sleep 10ms
[Avahi] timeout elapsed
[Avahi] Resolving service 'dm800' of type '_e2stream._tcp'
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[eDVBFrontend0] set sequence pos 3
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eDVBFrontend0] update current switch params
[Avahi] timeout elapsed
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[eDVBFrontend0] startTuneTimeout 5000
[Avahi] timeout elapsed
[Avahi] avahi_timeout_new
[Avahi] avahi_timeout_free
[Avahi] avahi_timeout_update
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] sleep 500ms
[eDVBFrontend0] fe event: status 1, inversion off, m_tuning 2
[eDVBFrontend0] fe event: status 1f, inversion off, m_tuning 3
[eDVBChannel] OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x14da9d0 running
[eDVBChannel] getDemux cap=00
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=20
[eEPGCache] channel 0x14da9d0 running
[eDVBChannel] getDemux cap=00
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBResourceManager] stop release channel timer
[eDVBChannel] getDemux cap=01
[eDVBResourceManager] allocate demux cap=01
[eDVBResourceManager] allocating shared demux adapter=0, demux=0, source=0
[eDVBServicePMTHandler] ok ... now we start!!
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
[eDVBServicePlay] have 1 video stream(s) (0259), and 1 audio stream(s) (025a), and the pcr pid is 0259, and the text pid is ffffffff
[eDVBChannel] getDemux cap=01
[eEPGCache] next update in 2 sec
[eTSMPEGDecoder] decoder state: play, vpid=0259, apid=025a
[eDVBPCR0] DMX_SET_PES_FILTER pid=0x0259 ok
[eDVBPCR0] DEMUX_START ok
[eDVBAudio0] DMX_SET_PES_FILTER pid=0x025a ok
[eDVBAudio0] DEMUX_START ok
[eDVBAudio0] AUDIO_SET_BYPASS bypass=1 ok
[eDVBAudio0] AUDIO_PAUSE ok
[eDVBAudio0] AUDIO_PLAY ok
[eDVBVideo] Video Device: /dev/dvb/adapter0/video0
[eDVBVideo] demux device: /dev/dvb/adapter0/demux0
[eDVBVideo0] VIDEO_SET_STREAMTYPE 0 - ok
[eDVBVideo0] DMX_SET_PES_FILTER pid=0x0259 ok
[eDVBVideo0] DEMUX_START ok
[eDVBVideo0] VIDEO_FREEZE ok
[eDVBVideo0] VIDEO_PLAY ok
[eDVBVideo0] VIDEO_SLOWMOTION 0 ok
[eDVBVideo0] VIDEO_FAST_FORWARD 0 ok
[eDVBVideo0] VIDEO_CONTINUE ok
[eDVBAudio0] AUDIO_CONTINUE ok
[eDVBAudio0] AUDIO_CHANNEL_SELECT 0 ok
[eDVBTeletextParser] Starting!
[eDVBTeletextParser] disable teletext subtitles page ffffffffffffffff (und)
[eDVBPESReader] Created. Opening demux
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBTeletextParser] created teletext subtitle PES reader!
[eDVBPESReader] Created. Opening demux
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBTeletextParser] starting PES reader on pid=ffffffff
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
not pauseable.
[eDVBServicePlay] timeshift
[eDVBCAService] new service 1:0:1:6:3B:800:DC00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:6:3B:800:DC00000:0:0:0:
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=18
RemovePopup, id = ZapError
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBFrontend0] set dynamic current limiting
[eEPGCache] start caching events(1542820372)
[eDVBSectionReader] DMX_SET_FILTER pid=3842
[eDVBSectionReader] DMX_SET_FILTER pid=3003
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=18
[eDVBSectionReader] DMX_SET_FILTER pid=5000
[eDVBSectionReader] DMX_SET_FILTER pid=5000
[eDVBSectionReader] DMX_SET_FILTER pid=57
[Avahi] watch activated: 0x1
[Avahi] avahi_timeout_update
[eDVBLocalTimerHandler] diff is -6
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 19:12:47
[eDVBLocalTimerHandler] m_time_difference is -6
[eDVBLocalTimerHandler] set Linux Time
[eDVBChannel] getDemux cap=00
[eDVBVideo0] VIDEO_GET_EVENT SIZE_CHANGED 720x576 aspect 3
[eDVBVideo0] VIDEO_GET_EVENT PROGRESSIVE_CHANGED 0
[eDVBServicePMTHandler] PATready
[eDVBServicePMTHandler] use pmtpid 0258 for service_id 0006
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=600
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=0
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=200
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[Avahi] timeout elapsed
[Avahi] avahi_timeout_update
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
[eDVBServicePlay] have 1 video stream(s) (0259), and 1 audio stream(s) (025a), and the pcr pid is 0259, and the text pid is ffffffff
[eTSMPEGDecoder] decoder state: play, vpid=0259, apid=025a
[eDVBVideo0] VIDEO_SLOWMOTION 0 ok
[eDVBVideo0] VIDEO_FAST_FORWARD 0 ok
[eDVBVideo0] VIDEO_CONTINUE ok
[eDVBAudio0] AUDIO_CONTINUE ok
[eDVBCIInterfaces] gotPMT
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=600
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=300
[ePicLoad] thread failed to modify scheduling priority (Success)
[ePicLoad] decode picture... /usr/share/enigma2/Pal.5.FullHD/WeatherIcon/29.png
[EXIF] getting exif from PNG
[ePicLoad] thread failed to modify scheduling priority (Success)
[ePicLoad] decode picture... /usr/share/enigma2/Pal.5.FullHD/WeatherIcon/29.png
[EXIF] getting exif from PNG
[ePicLoad] thread failed to modify scheduling priority (Success)
[ePicLoad] decode picture... /usr/share/enigma2/Pal.5.FullHD/WeatherIcon/4.png
[EXIF] getting exif from PNG
[ePicLoad] thread failed to modify scheduling priority (Success)
[ePicLoad] decode picture... /usr/share/enigma2/Pal.5.FullHD/WeatherIcon/11.png
[EXIF] getting exif from PNG
[ePicLoad] thread failed to modify scheduling priority (Success)
[ePicLoad] decode picture... /usr/share/enigma2/Pal.5.FullHD/WeatherIcon/30.png
[EXIF] getting exif from PNG
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=400
[eDVBServicePMTHandler] sdt update done!
[ePicLoad] <format not supported>
[ActionMap] Keymap 'InfobarSubserviceSelectionActions' -> Action = 'DeliteGpshow'
[gAccel] alloc failed
[gSurface] ERROR: accelAlloc failed
[gAccel] alloc failed
[gSurface] ERROR: accelAlloc failed
[ePNG] couldn't open /usr/lib/enigma2/python/Plugins/Extensions/NcamAddons/NcamAddons.png
[Skin] Processing screen: DeliteGreenPanel
[gAccel] alloc failed
[gSurface] ERROR: accelAlloc failed
[Skin] Processing screen: SimpleSummary
[eEPGCache] abort non avail netmed schedule reading
[eEPGCache] abort non avail netmed schedule other reading
[eEPGCache] abort non avail FreeSat schedule_other reading
[eEPGCache] abort non avail viasat reading
[eEPGCache] nownext finished(1542820375)
[ActionMap] Keymap 'WizardActions' -> Unknown action 'right'! (Typo in keymap?)
[ActionMap] Keymap 'WizardActions' -> Unknown action 'down'! (Typo in keymap?)
[ActionMap] Keymap 'WizardActions' -> Unknown action 'down'! (Typo in keymap?)
[ActionMap] Keymap 'WizardActions' -> Unknown action 'down'! (Typo in keymap?)
[ActionMap] Keymap 'WizardActions' -> Action = 'ok'
 0.Ncam Bin Updat
 1.Free Cccam To Ncam Emu
 2.State Of Server Ncam
 3.Setup
 4.About
 5.New
 6.Updat Plugin
[Skin] Processing screen: NcamAddonsScreenn
warning, skin is missing element ecminfo in <class 'Plugins.Extensions.NcamAddons.plugin.NcamAddonsScreenn'>
[gAccel] alloc failed
[gSurface] ERROR: accelAlloc failed
warning, skin is missing element info_15 in <class 'Plugins.Extensions.NcamAddons.plugin.NcamAddonsScreenn'>
[gAccel] alloc failed
[gSurface] ERROR: accelAlloc failed
[Skin] Processing screen: SimpleSummary
[eTextPara] unicode U+fe8e not present
[eTextPara] unicode U+fe8c not present
[eTextPara] unicode U+fef4 not present
[eTextPara] unicode U+feb7 not present
[eTextPara] unicode U+feb2 not present
[eTextPara] unicode U+fee4 not present
[eTextPara] unicode U+fee0 not present
[eTextPara] unicode U+fe97 not present
[eTextPara] unicode U+fefb not present
[eTextPara] unicode U+feff not present
[eTextPara] unicode U+fe95 not present
[eTextPara] unicode U+fe8e not present
[eTextPara] unicode U+fed4 not present
[eTextPara] unicode U+fee0 not present
[eTextPara] unicode U+fee3 not present
[eTextPara] unicode U+fede not present
[eTextPara] unicode U+fef4 not present
[eTextPara] unicode U+fee4 not present
[eTextPara] unicode U+fea4 not present
[eTextPara] unicode U+fe97 not present
[eTextPara] unicode U+fe94 not present
[eTextPara] unicode U+fee0 not present
[eTextPara] unicode U+fecc not present
[eTextPara] unicode U+fed4 not present
[eTextPara] unicode U+fee3 not present
[eTextPara] unicode U+feae not present
[eTextPara] unicode U+fef4 not present
[eTextPara] unicode U+fecf not present
[ActionMap] Keymap 'DirectionActions' -> Action = 'down'
[eTextPara] unicode U+fe94 not present
[eTextPara] unicode U+fef4 not present
[eTextPara] unicode U+fee7 not present
[eTextPara] unicode U+fe8e not present
[eTextPara] unicode U+fea0 not present
[eTextPara] unicode U+fee3 not present
[eTextPara] unicode U+fe95 not present
[eTextPara] unicode U+fe8d not present
[eTextPara] unicode U+feae not present
[eTextPara] unicode U+fed3 not present
[eTextPara] unicode U+feae not present
[eTextPara] unicode U+feb3 not present
[ActionMap] Keymap 'DirectionActions' -> Unknown action 'downUp'! (Typo in keymap?)
[ActionMap] Keymap 'DirectionActions' -> Action = 'down'
[eTextPara] unicode U+fe95 not present
[eTextPara] unicode U+fe8d not present
[eTextPara] unicode U+feae not present
[eTextPara] unicode U+fed3 not present
[eTextPara] unicode U+feae not present
[eTextPara] unicode U+feb4 not present
[eTextPara] unicode U+fedf not present
[eTextPara] unicode U+fe8d not present
[eTextPara] unicode U+fe95 not present
[eTextPara] unicode U+fefb not present
[eTextPara] unicode U+feff not present
[eTextPara] unicode U+fe8e not present
[eTextPara] unicode U+fea3 not present
[ActionMap] Keymap 'DirectionActions' -> Unknown action 'downUp'! (Typo in keymap?)
[ActionMap] Keymap 'DirectionActions' -> Action = 'down'
[eTextPara] unicode U+fede not present
[eTextPara] unicode U+fef4 not present
[eTextPara] unicode U+fedf not present
[eTextPara] unicode U+fea9 not present
[eTextPara] unicode U+feed not present
[eTextPara] unicode U+feed not present
[eTextPara] unicode U+fe94 not present
[eTextPara] unicode U+fe8c not present
[eTextPara] unicode U+fef4 not present
[eTextPara] unicode U+feec not present
[eTextPara] unicode U+fe97 not present
[ActionMap] Keymap 'DirectionActions' -> Unknown action 'downUp'! (Typo in keymap?)
[ActionMap] Keymap 'SetupActions' -> Action = 'ok'
3
loadSkin: Screen already defined elsewhere: NcamAddonsScreenn
loadSkin: Screen already defined elsewhere: NcamUpdat_About
loadSkin: Screen already defined elsewhere: VirtualKeyBoard_1
loadSkin: Screen already defined elsewhere: MessageBoxNcam
loadSkin: Screen already defined elsewhere: ScreenNcamUpdatSetup
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 49, in action
  File "/usr/lib/enigma2/python/Plugins/Extensions/NcamAddons/plugin.py", line 216, in ok
  File "/usr/lib/enigma2/python/Plugins/Extensions/NcamAddons/plugin.py", line 186, in settings
  File "/usr/lib/enigma2/python/mytest.py", line 299, in open
    dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
  File "/usr/lib/enigma2/python/mytest.py", line 242, in instantiateDialog
    return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
  File "/usr/lib/enigma2/python/mytest.py", line 259, in doInstantiateDialog
    dlg = screen(self, *arguments, **kwargs)
  File "/usr/lib/enigma2/python/Plugins/Extensions/NcamAddons/Outils/NcamUpdatSetup.py", line 81, in __init__
  File "/usr/lib/enigma2/python/Plugins/Extensions/NcamAddons/Componen/ConfigListNcam.py", line 134, in __init__
  File "/usr/lib/enigma2/python/Plugins/Extensions/NcamAddons/Componen/ConfigListNcam.py", line 14, in __init__
TypeError: 'int' object is not iterable
[ePyObject] (CallObject(<bound method ActionMap.action of <Components.ActionMap.ActionMap instance at 0x315f61c0>>,('SetupActions', 'ok')) failed)


dmesg

<4>[  846.904000] stop pcr0 on dmx 0 pid:d53
<4>[  846.913000] stop audio on dmx 0 pid:d54
<4>[  846.917000] audio: xpt stop(1)
<4>[  846.920000] audio: decoder stop
<4>[  846.950000] bcm_audio_channel_stop(1) done
<4>[  846.956000] stop video0 on dmx 0 pid:d53
<4>[  846.963000] VIDEO0: stop decode
<4>[  846.966000] no decoder left in sync handling so disable xpt_sync
<4>[  847.017000] alps_bsbe2 is in powersave mode now
<4>[  847.087000] VIDEO0: set blank to 0
<4>[  847.092000] sync is off so we enable it
<4>[  847.096000] playback!
<4>[  847.099000] total video delay: 0 (0 ms)
<4>[  847.145000] VIDEO0: start decode
<4>[  847.188000] flush video decoder
<4>[  847.191000] VIDEO0 use saved pts 0xb9db0e76 (ret 0)
<4>[  847.352000] VIDEO0: first pts 0x0
<4>[  847.355000] VIDEO0: resolution changed (1280 720)
<4>[  847.360000] VIDEO0: aspect changed 3
<4>[  847.365000] VIDEO:0 scale mode is enabled... no aspect handling active!!
<4>[  847.424000] VIDEO0: set blank to 0
<4>[  847.429000] VIDEO0: stop decode
<4>[  847.434000] VIDEO0: set blank to 0
<4>[  847.438000] no decoder left in sync handling so disable xpt_sync
<4>[  848.112000] VIDEO0: progressive changed (1)
<3>[  851.114000] bcm_accel: invalid opcode! 00000080
<6>[  851.125000] bcmfb: enable manual blit
<4>[  854.268000] alps_bsbe2 is in normal mode now
<4>[  854.436000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[  854.552000] set current avs auto aspect to 16:9
<4>[  854.557000] disable wss on display 0
<4>[  854.560000] set wss 7 on display 1
<4>[  854.564000] set sb to 3(1)
<4>[  855.755000] 488960 ms: 100
<4>[  855.808000] 50 ms: 0
<4>[  857.279000] alps_bsbe2 is in powersave mode now
<4>[  860.320000] 4510 ms: 0
<4>[  860.492000] 170 ms: 4
<4>[  860.557000] 62 ms: 4
<4>[  860.564000] 5 ms: 4
<4>[  860.722000] 156 ms: 4
<4>[  862.228000] 1503 ms: 5
<4>[  862.281000] 51 ms: 6
<4>[  862.289000] 5 ms: 6
<4>[  862.297000] 5 ms: 6
<4>[  877.087000] 14788 ms: 6
<4>[  877.095000] 5 ms: 21
<4>[  877.307000] 209 ms: 21
<4>[  877.594000] 284 ms: 21
<4>[  877.601000] 4 ms: 22
<4>[  877.644000] 40 ms: 22
<4>[  877.653000] 6 ms: 22
<4>[  877.660000] 5 ms: 22
<4>[  878.334000] 671 ms: 22
<4>[  878.463000] 126 ms: 22
<4>[  878.587000] 121 ms: 22
<4>[  879.024000] 434 ms: 23
<4>[  879.031000] 5 ms: 23
<4>[  879.605000] 571 ms: 23
<4>[  880.340000] 733 ms: 24
<4>[  880.417000] 74 ms: 25
<4>[  880.539000] 120 ms: 25
<4>[  880.545000] 3 ms: 25
<4>[  880.555000] 7 ms: 25
<4>[  880.599000] 41 ms: 25
<4>[  899.157000] 18556 ms: 25
<4>[  899.165000] 5 ms: 43
<4>[  899.537000] 370 ms: 43
<4>[  899.543000] 4 ms: 43
<4>[  899.696000] 151 ms: 43
<4>[  899.707000] 8 ms: 43
<4>[  899.716000] 7 ms: 43
<4>[  899.734000] 15 ms: 43
<4>[  899.786000] 50 ms: 43
<4>[  899.796000] 7 ms: 43
<4>[  900.323000] 525 ms: 43
<4>[  900.659000] 333 ms: 45
<4>[  900.754000] set current avs auto aspect to 16:9
<4>[  900.759000] disable wss on display 0
<4>[  900.762000] set wss 7 on display 1
<4>[  900.766000] set sb to 3(1)
<4>[  900.771000] set current avs auto aspect to 16:9
<4>[  900.777000] disable wss on display 0
<4>[  900.781000] set wss 7 on display 1
<4>[  900.784000] set sb to 3(1)
<4>[  900.792000] disable wss on display 0
<4>[  900.797000] set wss 7 on display 1
<4>[  900.803000] set input to 0
<4>[  900.805000] set fb to 2(0)
<4>[  900.809000] set current avs auto aspect to 16:9
<4>[  900.814000] disable wss on display 0
<4>[  900.818000] set wss 7 on display 1
<4>[  900.821000] set sb to 3(1)
<4>[  900.837000] set ac3 to downmix
<4>[  900.846000] set aac to downmix
<4>[  900.871000] set mute 0 (111) 0
<4>[  900.880000] 219 ms: 45
<4>[  900.919000] 37 ms: 45
<4>[  901.802000] 880 ms: 45
<4>[  902.136000] 331 ms: 46
<4>[  903.243000] 1105 ms: 46
<4>[  903.336000] 91 ms: 48
<4>[  903.405000] 66 ms: 48
<4>[  903.439000] 31 ms: 48
<4>[  903.446000] 5 ms: 48
<4>[  903.455000] 7 ms: 48
<4>[  909.303000] set current avs auto aspect to 16:9
<4>[  909.307000] disable wss on display 0
<4>[  909.311000] set wss 7 on display 1
<4>[  909.316000] set sb to 3(1)
<4>[  909.325000] set current avs auto aspect to 16:9
<4>[  909.329000] disable wss on display 0
<4>[  909.334000] set wss 7 on display 1
<4>[  909.338000] set sb to 3(1)
<4>[  909.345000] disable wss on display 0
<4>[  909.349000] set wss 7 on display 1
<4>[  909.357000] set current avs auto aspect to 16:9
<4>[  909.362000] disable wss on display 0
<4>[  909.366000] set wss 7 on display 1
<4>[  909.369000] set sb to 3(1)
<4>[  909.384000] set current avs auto aspect to 16:9
<4>[  909.389000] disable wss on display 0
<4>[  909.393000] set wss 7 on display 1
<4>[  909.397000] set sb to 3(1)
<4>[  909.403000] set current avs auto aspect to 16:9
<4>[  909.408000] disable wss on display 0
<4>[  909.412000] set wss 7 on display 1
<4>[  909.416000] set sb to 3(1)
<4>[  909.424000] disable wss on display 0
<4>[  909.428000] set wss 7 on display 1
<4>[  909.436000] set current avs auto aspect to 16:9
<4>[  909.441000] disable wss on display 0
<4>[  909.445000] set wss 7 on display 1
<4>[  909.448000] set sb to 3(1)
<4>[  909.470000] set current avs auto aspect to 16:9
<4>[  909.476000] disable wss on display 0
<4>[  909.480000] set wss 7 on display 1
<4>[  909.483000] set sb to 3(1)
<4>[  909.493000] set current avs auto aspect to 16:9
<4>[  909.498000] disable wss on display 0
<4>[  909.502000] set wss 7 on display 1
<4>[  909.505000] set sb to 3(1)
<4>[  909.512000] disable wss on display 0
<4>[  909.516000] set wss 7 on display 1
<4>[  909.525000] set current avs auto aspect to 16:9
<4>[  909.529000] disable wss on display 0
<4>[  909.534000] set wss 7 on display 1
<4>[  909.538000] set sb to 3(1)
<4>[  909.554000] set current avs auto aspect to 16:9
<4>[  909.559000] disable wss on display 0
<4>[  909.562000] set wss 7 on display 1
<4>[  909.566000] set sb to 3(1)
<4>[  909.573000] set current avs auto aspect to 16:9
<4>[  909.578000] disable wss on display 0
<4>[  909.582000] set wss 7 on display 1
<4>[  909.585000] set sb to 3(1)
<4>[  909.594000] disable wss on display 0
<4>[  909.598000] set wss 7 on display 1
<4>[  909.605000] set current avs auto aspect to 16:9
<4>[  909.609000] disable wss on display 0
<4>[  909.614000] set wss 7 on display 1
<4>[  909.617000] set sb to 3(1)
<4>[  909.634000] set current avs auto aspect to 16:9
<4>[  909.639000] disable wss on display 0
<4>[  909.642000] set wss 7 on display 1
<4>[  909.646000] set sb to 3(1)
<4>[  909.654000] set current avs auto aspect to 16:9
<4>[  909.659000] disable wss on display 0
<4>[  909.663000] set wss 7 on display 1
<4>[  909.667000] set sb to 3(1)
<4>[  909.683000] set current avs auto aspect to 16:9
<4>[  909.688000] disable wss on display 0
<4>[  909.692000] set wss 7 on display 1
<4>[  909.696000] set sb to 3(1)
<4>[  909.703000] set current avs auto aspect to 16:9
<4>[  909.708000] disable wss on display 0
<4>[  909.711000] set wss 7 on display 1
<4>[  909.716000] set sb to 3(1)
<4>[  909.722000] disable wss on display 0
<4>[  909.726000] set wss 7 on display 1
<4>[  909.735000] set current avs auto aspect to 16:9
<4>[  909.740000] disable wss on display 0
<4>[  909.744000] set wss 7 on display 1
<4>[  909.747000] set sb to 3(1)
<4>[  934.957000] 31500 ms: 48
<4>[  935.651000] 692 ms: 80
<4>[  955.997000] 20342 ms: 80
<4>[  956.206000] 206 ms: 99
<4>[  956.228000] 20 ms: 99
<4>[  956.236000] 5 ms: 99
<4>[  957.563000] alps_bsbe2 is in normal mode now
<7>[  960.651000] unknown fec code: 0
<4>[  960.807000] start pcr0 on dmx 0 pid:259 index 1
<4>[  960.815000] start audio on dmx 0 pid:25a
<4>[  960.819000] audio xpt start
<4>[  960.822000] sync is off so we enable it
<4>[  960.826000] demux-index 0 pcr0pid 259
<4>[  960.830000] using 1 as pcr0 pidchannel
<4>[  960.838000] MPEG
<4>[  960.841000] audio: decoder start 0
<4>[  960.859000] video delay 0 (0 ms)
<4>[  960.862000] total video delay: 0 (0 ms)
<4>[  960.869000] start video0 on dmx 0 pid:259
<4>[  960.873000] total video delay: 0 (0 ms)
<4>[  960.877000] ch0: lock
<4>[  960.892000] VIDEO0: start decode
<4>[  960.956000] RAP first pts 0x6476ad30, stc 0x64769b4c, pcr valid
<4>[  961.064000] RAP sampling rate info isr (48000)
<4>[  961.069000] eBitRateChange Isr.. set source_changed_event!
<4>[  961.075000] eModeChange Isr.. set source_changed_event!
<4>[  961.254000] VIDEO0: first pts 0x647783ba
<4>[  961.258000] VIDEO0: resolution changed (720 576)
<4>[  961.413000] enable tsm0
<4>[  961.894000] VIDEO0: progressive changed (0)

السلام عليكم
شكرا على الملاحظة
بالضبط يوجد خطأ إن شاء الله تم تصحيحه وللتأكد حمل هذا الملف ConfigListNcam.py
في المسار /usr/lib/enigma2/python/Plugins/Extensions/NcamAddons/Componen
تجد ملفا اسمه ConfigListNcam.pyo احذفه وعوضه بالموجود في المرفقات ثم اعد اقلاع enigma2
للملاحظة تم تصحيح النسخة المحمولة
 

المرفقات

  • ConfigListNcam.zip
    2,3 KB · المشاهدات: 168
التعديل الأخير:
السلام عليكم
شكرا على الملاحظة
بالضبط يوجد خطأ إن شاء الله تم تصحيحه وللتأكد حمل هذا الملف ConfigListNcam.py
في المسار /usr/lib/enigma2/python/Plugins/Extensions/NcamAddons/Componen
تجد ملفا اسمه ConfigListNcam.pyo احذفه وعوضه بالموجود في المرفقات ثم اعد اقلاع enigma2
البلجن يعمل ممتاز
بس عند خانة جلب سيرفرات السي سي كام للاسف لا تعمل هذه الخانه....اي لا يجلب اي سيرفر بيكتب NOT FOUND
 
البلجن يعمل ممتاز
بس عند خانة جلب سيرفرات السي سي كام للاسف لا تعمل هذه الخانه....اي لا يجلب اي سيرفر بيكتب NOT FOUND
لو ممكن تعطيني صورة عن Free Cccam To Ncam Emu
الظاهر أنك لا تملك curl
 
لو ممكن تعطيني صورة عن Free Cccam To Ncam Emu
الظاهر أنك لا تملك curl
بالفعل ياغالي لم اكن منصب CURL بعد تنصيبه السيرفرات تنزل بكل سهوله ..
بس السيرفرات لا تذهب الى ncam.server
 
بالفعل ياغالي لم اكن منصب CURL بعد تنصيبه السيرفرات تنزل بكل سهوله ..
بس السيرفرات لا تذهب الى ncam.server
إن كان الملف ncam.srver موجودا مثلا في المسار /etc/tuxbox/config/
يجب أن تبدأ بـ / وتنتهي بـ / في الإعدادات Setup
 
اخي ابو ياسين على الفيو بلس سولو عند الدخول setup يحدث كراش جربت حتي الملف اللي في المشاركة رقم 5 ونفس القصه

كود:
Pure2 Enigma2 crash log

crashdate=Wed Nov 21 20:19:29 2018
compiledate=Nov 15 2018
skin=SmallFHD/skin.xml
sourcedate=2018-11-14
branch=master
rev=powervu-titles-ok-63-g3f1bcbd
component=Enigma2

stbmodel=solo
stbmodel=dm500hd
kernelcmdline=bmem=156M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw rootflags=sync
nimsockets=NIM Socket 0:
imageversion=box_type=vusolo
imageissue=


nts/Renderer/PositionGauge.py", line 27, in cutlist_changed
20:19:17.3874 {   } Components/StackTrace.py:49 run File: "/usr/lib/enigma2/python/Components/Element.py", line 13, in wrapper
20:19:17.3884 {   } Components/StackTrace.py:49 run File: "/usr/lib/enigma2/python/Components/Converter/ServicePosition.py", line 100, in getCutlist
20:19:17.3908 {   } Components/StackTrace.py:49 run File: "/usr/lib/enigma2/python/Components/Element.py", line 13, in wrapper
20:19:17.3921 {   } Components/StackTrace.py:49 run ========== Stacktrace end ================================
20:19:17.6022 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 6c 1
20:19:17.6070 {   } Screens/InfoBarGenerics.py:215 actionA KEY: 108 0
20:19:17.8337 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 6c 1
20:19:17.8359 {   } Screens/InfoBarGenerics.py:215 actionA KEY: 108 1
20:19:17.8631 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 6c 1
20:19:17.8663 {   } Screens/InfoBarGenerics.py:215 actionA KEY: 108 0
20:19:18.0947 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 6c 1
20:19:18.0976 {   } Screens/InfoBarGenerics.py:215 actionA KEY: 108 1
20:19:18.1690 [   ] service/servicedvb.cpp:1743 timeshift [eDVBServicePlay] timeshift
20:19:18.2701 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 6a 1
20:19:18.2723 {   } Screens/InfoBarGenerics.py:215 actionA KEY: 106 0
20:19:18.5017 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 6a 1
20:19:18.5046 {   } Screens/InfoBarGenerics.py:215 actionA KEY: 106 1
20:19:19.0247 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 67 1
20:19:19.0279 {   } Screens/InfoBarGenerics.py:215 actionA KEY: 103 0
20:19:19.2558 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 67 1
20:19:19.2582 {   } Screens/InfoBarGenerics.py:215 actionA KEY: 103 1
20:19:19.4218 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 160 1
20:19:19.4243 {   } Screens/InfoBarGenerics.py:215 actionA KEY: 352 0
20:19:19.4279 {   } Components/ActionMap.py:46 action action ->  SetupActions ok
20:19:19.6735 {   } Plugins/Extensions/NcamAddons/Outils/ConfigList.py:25 show_ScreenTest  0.Ncam Bin Updat
20:19:19.6778 {   } Plugins/Extensions/NcamAddons/Outils/ConfigList.py:25 show_ScreenTest  1.Free Cccam To Ncam Emu
20:19:19.6792 {   } Plugins/Extensions/NcamAddons/Outils/ConfigList.py:25 show_ScreenTest  2.State Of Server Ncam
20:19:19.6844 {   } Plugins/Extensions/NcamAddons/Outils/ConfigList.py:25 show_ScreenTest  3.Setup
20:19:19.6858 {   } Plugins/Extensions/NcamAddons/Outils/ConfigList.py:25 show_ScreenTest  4.About
20:19:19.6883 {   } Plugins/Extensions/NcamAddons/Outils/ConfigList.py:25 show_ScreenTest  5.New
20:19:19.6900 {   } Plugins/Extensions/NcamAddons/Outils/ConfigList.py:25 show_ScreenTest  6.Updat Plugin
20:19:19.7361 {   } skin.py:1359 readSkin [SKIN] processing screen NcamAddonsScreenn:
20:19:21.5563 { W } Components/GUISkin.py:35 createGUIScreen warning, skin is missing element ecminfo in <class 'Plugins.Extensions.NcamAddons.plugin.NcamAddonsScreenn'>
20:19:21.5945 { W } Components/GUISkin.py:35 createGUIScreen warning, skin is missing element info_15 in <class 'Plugins.Extensions.NcamAddons.plugin.NcamAddonsScreenn'>
20:19:21.6260 [ E ] gdi/accel.cpp:463 accelAlloc [gAccel] accel alloc failed

20:19:21.6263 [ E ] gdi/gpixmap.cpp:216 gSurface [gSurface] ERROR: accelAlloc failed
20:19:21.8187 [   ] dvb/epgcache.cpp:1985 abortNonAvail [eEPGCache] abort non avail netmed schedule reading
20:19:21.8480 [   ] dvb/epgcache.cpp:1992 abortNonAvail [eEPGCache] abort non avail netmed schedule other reading
20:19:21.8597 [   ] dvb/epgcache.cpp:2001 abortNonAvail [eEPGCache] abort non avail FreeSat schedule_other reading
20:19:21.9107 [   ] dvb/epgcache.cpp:2012 abortNonAvail [eEPGCache] abort non avail viasat reading
20:19:21.9227 <   > dvb/epgcache.cpp:2273 readData [eEPGCache] nownext finished(1542827961)

20:19:23.0922 [   ] gdi/grc.cpp:211 thread [gRC] main thread is non-idle! display spinner!
20:19:23.8242 {   } skin.py:1359 readSkin [SKIN] processing screen SimpleSummary:
20:19:23.9103 {   } Components/StackTrace.py:33 run StackTrace
20:19:23.9610 {   } Screens/Screen.py:150 show [SCREENNAME]  ['NcamAddonsScreenn_summary', 'SimpleSummary']
20:19:24.0514 {   } Screens/Screen.py:150 show [SCREENNAME]  NcamAddonsScreenn
20:19:26.3237 [   ] gdi/grc.cpp:211 thread [gRC] main thread is non-idle! display spinner!
20:19:26.6747 {   } Components/StackTrace.py:49 run ========== Stacktrace of active Python threads ===========
20:19:26.6832 {   } Components/StackTrace.py:49 run ========== Thread ID  0x70fb7440 =========================
20:19:26.6849 {   } Components/StackTrace.py:49 run File: "/usr/lib/python2.7/threading.py", line 774, in __bootstrap
20:19:26.6862 {   } Components/StackTrace.py:49 run File: "/usr/lib/python2.7/threading.py", line 801, in __bootstrap_inner
20:19:26.6934 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 160 1
20:19:26.7232 {   } Components/StackTrace.py:49 run File: "/usr/lib/python2.7/threading.py", line 754, in run
20:19:26.7246 {   } Components/StackTrace.py:49 run File: "/usr/lib/python2.7/site-packages/twisted/_threads/_threadworker.py", line 45, in work
20:19:26.7261 {   } Components/StackTrace.py:49 run File: "/usr/lib/python2.7/Queue.py", line 168, in get
20:19:26.7277 {   } Components/StackTrace.py:49 run File: "/usr/lib/python2.7/threading.py", line 340, in wait
20:19:26.7286 {   } Components/StackTrace.py:49 run ========== Thread ID  0x71824440 =========================
20:19:26.7294 {   } Components/StackTrace.py:49 run File: "/usr/lib/python2.7/threading.py", line 774, in __bootstrap
20:19:26.7316 {   } Components/StackTrace.py:49 run File: "/usr/lib/python2.7/threading.py", line 801, in __bootstrap_inner
20:19:26.7328 {   } Components/StackTrace.py:49 run File: "/usr/lib/python2.7/threading.py", line 754, in run
20:19:26.7347 {   } Screens/InfoBarGenerics.py:215 actionA File: "/usr/lib/python2.7/site-packages/twisted/_threads/_threadworker.py", line 45, in work KEY: 352 1
20:19:26.7470 {   } Components/StackTrace.py:49 run File: "/usr/lib/python2.7/site-packages/twisted/_threads/_threadworker.py", line 45, in work
20:19:26.7486 {   } Components/StackTrace.py:49 run File: "/usr/lib/python2.7/Queue.py", line 168, in get
20:19:26.7507 {   } Components/StackTrace.py:49 run File: "/usr/lib/python2.7/threading.py", line 340, in wait
20:19:26.7519 {   } Components/StackTrace.py:49 run ========== MainThread 0x76a38010 =========================
20:19:26.7529 {   } Components/StackTrace.py:49 run File: "/usr/lib/enigma2/python/mytest.py", line 875, in <module>
20:19:26.7603 {   } Components/StackTrace.py:49 run   runScreenTest()
20:19:26.7621 {   } Components/StackTrace.py:49 run File: "/usr/lib/enigma2/python/mytest.py", line 641, in runScreenTest
20:19:26.7631 {   } Components/StackTrace.py:49 run   runReactor()
20:19:26.8018 {   } Components/StackTrace.py:49 run File: "/usr/lib/enigma2/python/mytest.py", line 120, in runReactor
20:19:26.8029 {   } Components/StackTrace.py:49 run   reactor.run(installSignalHandlers=False)
20:19:26.8040 {   } Components/StackTrace.py:49 run File: "/usr/lib/python2.7/site-packages/twisted/internet/base.py", line 1243, in run
20:19:26.8051 {   } Components/StackTrace.py:49 run File: "/usr/lib/python2.7/site-packages/twisted/internet/base.py", line 1255, in mainLoop
20:19:26.8062 {   } Components/StackTrace.py:49 run File: "/usr/lib/enigma2/python/e2reactor.py", line 150, in doPoll
20:19:26.8072 {   } Components/StackTrace.py:49 run File: "/usr/lib/enigma2/python/e2reactor.py", line 40, in poll
20:19:26.8333 {   } Components/StackTrace.py:49 run File: "/usr/lib/enigma2/python/Components/ActionMap.py", line 48, in action
20:19:26.8344 {   } Components/StackTrace.py:49 run File: "/usr/lib/enigma2/python/Screens/PluginBrowser.py", line 167, in save
20:19:26.8354 {   } Components/StackTrace.py:49 run File: "/usr/lib/enigma2/python/Screens/PluginBrowser.py", line 171, in run
20:19:26.8393 {   } Components/StackTrace.py:49 run File: "/usr/lib/enigma2/python/Plugins/Extensions/NcamAddons/plugin.py", line 253, in main
20:19:26.8404 {   } Components/StackTrace.py:49 run File: "/usr/lib/enigma2/python/mytest.py", line 363, in open
20:19:26.8526 {   } Components/StackTrace.py:49 run   self.execBegin()
20:19:26.8538 {   } Components/StackTrace.py:49 run File: "/usr/lib/enigma2/python/mytest.py", line 244, in execBegin
20:19:26.8586 {   } Components/StackTrace.py:49 run   c.execBegin()
20:19:26.8843 {   } Components/StackTrace.py:49 run File: "/usr/lib/enigma2/python/mytest.py", line 292, in instantiateSummaryDialog
20:19:26.8854 {   } Components/StackTrace.py:49 run   screen.addSummary(self.summary)
20:19:26.8863 {   } Components/StackTrace.py:49 run File: "/usr/lib/enigma2/python/mytest.py", line 319, in doInstantiateDialog
20:19:26.8877 {   } Components/StackTrace.py:49 run   return dlg
20:19:26.8884 {   } Components/StackTrace.py:49 run File: "/usr/lib/enigma2/python/skin.py", line 1373, in readSkin
20:19:26.8913 {   } Components/StackTrace.py:49 run File: "/usr/lib/enigma2/python/skin.py", line 1323, in process_screen
20:19:26.9013 {   } Components/StackTrace.py:49 run File: "/usr/lib/enigma2/python/skin.py", line 1312, in process
20:19:26.9029 {   } Components/StackTrace.py:49 run File: "/usr/lib/enigma2/python/skin.py", line 1271, in process_widget
20:19:26.9060 {   } Components/StackTrace.py:49 run File: "/usr/lib/enigma2/python/Components/Renderer/RollerCharLCD.py", line 17, in __init__
20:19:26.9087 {   } Components/StackTrace.py:49 run ========== Stacktrace end ================================
20:19:27.0790 [   ] gdi/font.cpp:855 renderString [eTextPara] unicode U+feff not present
20:19:27.9191 {   } Components/StackTrace.py:33 run StackTrace
20:19:27.9376 {   } Components/StackTrace.py:49 run ========== Stacktrace of active Python threads ===========
20:19:27.9386 {   } Components/StackTrace.py:49 run ========== Thread ID  0x70fb7440 =========================
20:19:27.9396 {   } Components/StackTrace.py:49 run File: "/usr/lib/python2.7/threading.py", line 774, in __bootstrap
20:19:27.9406 {   } Components/StackTrace.py:49 run File: "/usr/lib/python2.7/threading.py", line 801, in __bootstrap_inner
20:19:27.9415 {   } Components/StackTrace.py:49 run File: "/usr/lib/python2.7/threading.py", line 754, in run
20:19:27.9424 {   } Components/StackTrace.py:49 run File: "/usr/lib/python2.7/site-packages/twisted/_threads/_threadworker.py", line 45, in work
20:19:27.9435 {   } Components/StackTrace.py:49 run File: "/usr/lib/python2.7/Queue.py", line 168, in get
20:19:27.9448 {   } Components/StackTrace.py:49 run File: "/usr/lib/python2.7/threading.py", line 340, in wait
20:19:27.9460 {   } Components/StackTrace.py:49 run ========== Thread ID  0x71824440 =========================
20:19:27.9469 {   } Components/StackTrace.py:49 run File: "/usr/lib/python2.7/threading.py", line 774, in __bootstrap
20:19:27.9479 {   } Components/StackTrace.py:49 run File: "/usr/lib/python2.7/threading.py", line 801, in __bootstrap_inner
20:19:27.9490 {   } Components/StackTrace.py:49 run File: "/usr/lib/python2.7/threading.py", line 754, in run
20:19:27.9518 {   } Components/StackTrace.py:49 run File: "/usr/lib/python2.7/site-packages/twisted/_threads/_threadworker.py", line 45, in work
20:19:27.9540 {   } Components/StackTrace.py:49 run File: "/usr/lib/python2.7/Queue.py", line 168, in get
20:19:27.9552 {   } Components/StackTrace.py:49 run File: "/usr/lib/python2.7/threading.py", line 340, in wait
20:19:27.9566 {   } Components/StackTrace.py:49 run ========== MainThread 0x76a38010 =========================
20:19:27.9574 {   } Components/StackTrace.py:49 run File: "/usr/lib/enigma2/python/mytest.py", line 875, in <module>
20:19:27.9584 {   } Components/StackTrace.py:49 run   runScreenTest()
20:19:27.9593 {   } Components/StackTrace.py:49 run File: "/usr/lib/enigma2/python/mytest.py", line 641, in runScreenTest
20:19:27.9603 {   } Components/StackTrace.py:49 run   runReactor()
20:19:27.9612 {   } Components/StackTrace.py:49 run File: "/usr/lib/enigma2/python/mytest.py", line 120, in runReactor
20:19:27.9621 {   } Components/StackTrace.py:49 run   reactor.run(installSignalHandlers=False)
20:19:27.9630 {   } Components/StackTrace.py:49 run File: "/usr/lib/python2.7/site-packages/twisted/internet/base.py", line 1243, in run
20:19:27.9639 {   } Components/StackTrace.py:49 run File: "/usr/lib/python2.7/site-packages/twisted/internet/base.py", line 1255, in mainLoop
20:19:27.9651 {   } Components/StackTrace.py:49 run File: "/usr/lib/enigma2/python/e2reactor.py", line 150, in doPoll
20:19:27.9661 {   } Components/StackTrace.py:49 run File: "/usr/lib/enigma2/python/e2reactor.py", line 40, in poll
20:19:27.9671 {   } Components/StackTrace.py:49 run ========== Stacktrace end ================================
20:19:28.0828 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 6c 1
20:19:28.0852 {   } Screens/InfoBarGenerics.py:215 actionA KEY: 108 0
20:19:28.0869 {   } Components/ActionMap.py:46 action action ->  DirectionActions down
20:19:28.3147 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 6c 1
20:19:28.3168 {   } Screens/InfoBarGenerics.py:215 actionA KEY: 108 1
20:19:28.3837 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 6c 1
20:19:28.3864 {   } Screens/InfoBarGenerics.py:215 actionA KEY: 108 0
20:19:28.3883 {   } Components/ActionMap.py:46 action action ->  DirectionActions down
20:19:28.4151 [   ] gdi/font.cpp:855 renderString [eTextPara] unicode U+feff not present
20:19:28.5087 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 6c 1
20:19:28.5119 {   } Screens/InfoBarGenerics.py:215 actionA KEY: 108 1
20:19:28.6322 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 6c 1
20:19:28.6342 {   } Screens/InfoBarGenerics.py:215 actionA KEY: 108 0
20:19:28.6360 {   } Components/ActionMap.py:46 action action ->  DirectionActions down
20:19:28.7567 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 6c 1
20:19:28.7591 {   } Screens/InfoBarGenerics.py:215 actionA KEY: 108 1
20:19:29.1031 [   ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 160 1
20:19:29.1060 {   } Screens/InfoBarGenerics.py:215 actionA KEY: 352 0
20:19:29.1081 {   } Components/ActionMap.py:46 action action ->  SetupActions ok
20:19:29.1097 {   } Plugins/Extensions/NcamAddons/plugin.py:215 ok 3
20:19:29.2674 { E } mytest.py:268 create Screen <class 'Plugins.Extensions.NcamAddons.Outils.NcamUpdatSetup.ScreenNcamUpdatSetup'>((), {}): <type 'exceptions.TypeError'>
20:19:29.2749 { D } Traceback (most recent call last):
20:19:29.2764 { D }   File "/usr/lib/enigma2/python/mytest.py", line 265, in create
20:19:29.2776 { D }     return screen(self, *arguments, **kwargs)
20:19:29.2804 { D }   File "/usr/lib/enigma2/python/Plugins/Extensions/NcamAddons/Outils/NcamUpdatSetup.py", line 81, in __init__
20:19:29.2933 { D }   File "/usr/lib/enigma2/python/Plugins/Extensions/NcamAddons/Componen/ConfigListNcam.py", line 134, in __init__
20:19:29.3183 { D }     self["config"] = ConfigListNcam(list, session = session)
20:19:29.3192 { D }   File "/usr/lib/enigma2/python/Plugins/Extensions/NcamAddons/Componen/ConfigListNcam.py", line 15, in __init__
20:19:29.3217 { D }     self.l.setSeperation(seperation)
20:19:29.3363 { D } TypeError: in method 'eListboxPythonConfigContent_setSeperation', argument 2 of type 'int'
20:19:29.3379 {   } mytest.py:270 create [mytest.py] quitMainloop #1
20:19:29.3802 { D } Traceback (most recent call last):
20:19:29.3821 { D }   File "/usr/lib/enigma2/python/Components/ActionMap.py", line 48, in action
20:19:29.4142 { D }   File "/usr/lib/enigma2/python/Plugins/Extensions/NcamAddons/plugin.py", line 216, in ok
20:19:29.4168 { D }   File "/usr/lib/enigma2/python/Plugins/Extensions/NcamAddons/plugin.py", line 186, in settings
20:19:29.4187 { D }   File "/usr/lib/enigma2/python/mytest.py", line 361, in open
20:19:29.4326 { D }     dlg.isTmp = True
20:19:29.4338 { D } AttributeError: 'NoneType' object has no attribute 'isTmp'
20:19:29.4413 [ E ] python/python.cpp:210 call [ePyObject] (PyObject_CallObject(<bound method ActionMap.action of <Components.ActionMap.ActionMap instance at 0x71fcff80>>,('SetupActions', 'ok')) failed)


dmesg

<4>[LCD]:bm730_dbox_lcd_write_read_data len: 8
<4>
<4>[LCD]:rtc data received 4
<4>
<4>[LCD]:bm730_dbox_lcd_write_data
<4>
<4>[LCD]:vfd reply success
<4>
<4>[VID]: VIDEO_STOP 1  1
<4>[AUD]: AUDIO_STOP 0
<4>[AUD]: AUDIO_CONTINUE 0 0 aph=0x0
<4>[AUD]: AUDIO_CONTINUE aph=0 0 0
<2>EXT4-fs error (device sda1): ext4_mb_generate_buddy:749: group 2, 23738 clusters in bitmap, 24250 in gd
<4>[LCD]:bm730_dbox_lcd_write_data
<4>
<4>[LCD]:vfd reply success
<4>
<4>[LCD]:bm730_dbox_lcd_write_read_data len: 8
<4>
<4>[LCD]:rtc data received 4
<4>
<4>[DFP]:dbox_fp_release
<4>
<4>[CI]:ci_dev_release
<4>
<4>[CI]:ci_dev_release
<4>
<4>[VID]: VIDEO_SET_STREAMTYPE 0
<4>[VID]: VIDEO_SELECT_SOURCE 1 
<4>[VID]: VIDEO_PLAY 1  2 0
<4>[VID]: VIDEO_CONTINUE 1  1
<4>[VID]: VIDEO_CLEAR_BUFFER 1  1 0
<4>[VID]: VIDEO_STOP 0  1
<4>[VID]: VIDEO_SELECT_SOURCE 0 
<4>[LCD]:dbox_lcd_open
<4>
<4>[LCD]:dbox_lcd_ioctl cmd : 4117
<4>
<3>[LCD]: unknown cmd 0x1015
<4>[DFP]:dbox_fp_open
<4>
<4>[CI]:ci_dev_open
<4>
<4>[CI]:ci1_dev_open
<4>
<4>[CI]:NEXUS_Remux_Start CI0 0 0
<4>
<4>[CI]:>>close_mpod tuner:0
<4>
<4>[CI]:remux stop
<4>
<4>[CI]:get_remux_startcnt count : 0
<4>
<4>[CI]:get_remux_startcnt() count : 0
<4>
<4>[CI]:get_remux_startcnt count : 0
<4>
<4>[CI]:get_remux_startcnt count : 0
<4>
<4>[CI]:get_remux_startcnt count : 0
<4>
<4>[CI]:get_remux_startcnt() count : 0
<4>
<4>[CI]:>>close_mpod tuner:1
<4>
<4>[CI]:remux stop
<4>
<4>[CI]:get_remux_startcnt count : 0
<4>
<4>[CI]:get_remux_startcnt() count : 0
<4>
<4>[CI]:get_remux_startcnt count : 0
<4>
<4>[CI]:get_remux_startcnt count : 0
<4>
<4>[CI]:get_remux_startcnt count : 0
<4>
<4>[CI]:get_remux_startcnt() count : 0
<4>
<4>[DFP]:dbox_fp_open
<4>
<4>[DFP]:dbox_fp_ioctl cmd : 0
<4>
<4>[DFP]:dbox_fp_ioctl cmd : 256
<4>
<4>[DFP]:dbox_fp_release
<4>
<4>[DFP]:scart_select_screentype aRatio = 2
<4>[DFP]:max9597_slow_blanking data = 0x19
<4>[DFP]:scart_select_tvvideotype TV = 2
<4>[DFP]:max9597_fast_blanking data = 0x19
<4>[DFP]:max9597_enable_output data = 0x3e
<4>[DFP]:scart_select_tvout aTVOutType = 2
<4>[LCD]:bm730_dbox_lcd_write_data
<4>
<4>[LCD]:vfd reply success
<4>
<4>[LCD]:bm730_dbox_lcd_write_data
<4>
<4>[LCD]:vfd reply success
<4>
<4>[LCD]:bm730_dbox_lcd_write_data
<4>
<4>[LCD]:vfd reply success
<4>
<4>[AUD]: AUDIO_SET_MUTE 0
<4>[AUD]: AUDIO_SET_MIXER -2081219088
<4>[DFP]:scart_select_tvvideotype TV = 2
<4>[DFP]:max9597_fast_blanking data = 0x19
<4>[DFP]:max9597_enable_output data = 0x3e
<4>[DFP]:dbox_fp_open
<4>
<4>[DFP]:dbox_fp_ioctl cmd : 0
<4>
<4>[DFP]:dbox_fp_release
<4>
<4>[AUD]: AUDIO_SET_MIXER -2081219088
<4>[DFP]:dbox_fp_ioctl cmd : 7
<4>
<4>[DFP]:dbox_fp_ioctl FP_IOCTL_GET_VCR
<4>
<4>[LCD]:bm730_dbox_lcd_write_data
<4>
<4>[LCD]:vfd reply success
<4>
<4>[LCD]:bm730_dbox_lcd_write_read_data len: 8
<4>
<4>[LCD]:rtc data received 4
<4>
<4>FE tune
<4>[AUD]: AUDIO_SELECT_SOURCE 0
<4>[AUD]: AUDIO_SET_BYPASS_MODE 1
<4>[AUD]: downmix 0 state : 0
<4>[AUD]: AUDIO_PAUSE 0
<4>[AUD]: AUDIO_PLAY 0 decoder start : 0
<4>[VID]: VIDEO_SELECT_SOURCE 0 
<4>[VID]: VIDEO_GET_SIZE src w: 1280 h:720 display w:1280 h:720
<4>[VID]: VIDEO_GET_SIZE aspect: 1 3
<4>[VID]: VIDEO_SET_STREAMTYPE 0
<4>[VID]: VIDEO_FREEZE 0  0
<4>[VID]: VIDEO_PLAY 0  2 2
<4>[VID]: VIDEO_SLOWMOTION 0    1
<4>[VID]: VIDEO_FAST_FORWARD 0    1
<4>[VID]: VIDEO_CONTINUE 0  1
<4>[AUD]: AUDIO_CONTINUE 0 1 aph=0xc0bf61bc
<4>[AUD]: Mute : 0
<4>[AUD]: AUDIO_CHANNEL_SELECT 0
<4>[VID]: VIDEO_SLOWMOTION 0    1
<4>[VID]: VIDEO_FAST_FORWARD 0    1
<4>[VID]: VIDEO_CONTINUE 0  1
<4>[AUD]: AUDIO_CONTINUE 0 1 aph=0xc0bf61bc
<4>[AUD]: Mute : 0
<4>[LCD]:bm730_dbox_lcd_write_data
<4>
<4>[LCD]:vfd reply success
<4>
<4>[LCD]:bm730_dbox_lcd_write_read_data len: 8
<4>
<4>[LCD]:rtc data received 4
<4>
<4>[VID]: VIDEO_STOP 1  1
<4>[AUD]: AUDIO_STOP 0
<4>[AUD]: AUDIO_CONTINUE 0 0 aph=0x0
<4>[AUD]: AUDIO_CONTINUE aph=0 0 0
<4>FE tune
<4>[AUD]: AUDIO_SELECT_SOURCE 0
<4>[AUD]: AUDIO_SET_BYPASS_MODE 1
<4>[AUD]: downmix 0 state : 0
<4>[AUD]: AUDIO_PAUSE 0
<4>[AUD]: AUDIO_PLAY 0 decoder start : 0
<4>[VID]: VIDEO_SELECT_SOURCE 0 
<4>[VID]: VIDEO_SET_STREAMTYPE 1
<4>[VID]: VIDEO_FREEZE 0  0
<4>[VID]: VIDEO_PLAY 0  5 2
<4>[VID]: VIDEO_SLOWMOTION 0    1
<4>[VID]: VIDEO_FAST_FORWARD 0    1
<4>[VID]: VIDEO_CONTINUE 0  1
<4>[AUD]: AUDIO_CONTINUE 0 1 aph=0xc0bf61bc
<4>[AUD]: Mute : 0
<4>[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
<4>[VID]: VIDEO_GET_SIZE aspect: 1 0
<4>[LCD]:bm730_dbox_lcd_write_data
<4>
<4>[LCD]:vfd reply success
<4>
<4>[LCD]:bm730_dbox_lcd_write_read_data len: 8
<4>
<4>[LCD]:rtc data received 4
<4>
<4>[VID]: VIDEO_SLOWMOTION 0    1
<4>[VID]: VIDEO_FAST_FORWARD 0    1
<4>[VID]: VIDEO_CONTINUE 0  1
<4>[AUD]: AUDIO_CONTINUE 0 1 aph=0xc0bf61bc
<4>[AUD]: Mute : 0
 
أعلى