FoXconn Motherbord

الموضوع في 'طلبات و إستفسارات الهردوير' بواسطة sabri_iocne, بتاريخ ‏16 أكتوبر 2008.

  1. sabri_iocne

    sabri_iocne عضو

    إنضم إلينا في:
    ‏28 أكتوبر 2007
    الإعجابات المتلقاة:
      16-10-2008 11:26


    Processor: Intel® Core™2 Quad, Core™2 Extreme, Core™2 Duo, Pentium® D, Pentium® EE, Pentium® 4 processors, Socket T (LGA775)
    Chipset: Intel® 975X + ICH7R
    Front Side Bus: FSB 1066/800/533 MHz
    Memory: Dual channel DDR2 800 (OC) / 667 / 533 x 4 DIMMs /ECC, Max. 8GB
    VGA on Die: N/A
    Expansion Slots: 3 x PCIe x16 slots ( Run x8 + x8 + x4 mode, dual graphics cards technology compatible ), 2 x PCI slots
    IDE: 1 x ATA 133 + 1 x ATA 100
    (To advance IDE transfer speed, you may install JMicron IDE-SATA RAID Drive. You can download the drive by clicking the "drive" icon at the left side.)
    Serial ATA(SATA)/RAID: 4 x SATAII + 1 x eSATA w / RAID 0, 1, 0+1, 5
    Audio: 7.1 channel with Realtek ALC 888 (HDA)
    LAN: Dual GbE LAN with Marvell 88E8056 + Realtek 8110SC
    IEEE1394: 2 x 1394a with VT6308P ( one pin header and one rear port)
    Back Panel I/O Ports: 1x Parallel port
    1x PS/2 keyboard port
    1x PS/2 mouse port
    1x S/PDIF Fibre out
    1x S/PDIF Coaxial out
    1x audio jack supports 5 jacks
    1x IEEE1394 port
    4x USB 2.0 ports
    1x RJ45 LAN jacks
    1x External SATA Port
    Internal I/O Connectors: ATX 24-Pin power connector
    8-pin ATX 12V power connector
    CPU / System / NB FAN connectors
    CD-in connector
    1x Front Audio Header
    2x ATA HD connectors
    1x IRDA
    1x speaker
    1x Front panel connector
    1x IEEE1394 connector support additional one port
    2x USB 2.0 connector support additional 4 ports
    1x Floppy disk drive connector
    4x Serial ATAII
    1x Buzzer
    1x SPDIF out header
    1x LED onboard
    BIOS Features: 4Mb flash EEPROM w/ LAN boot PnP, ACPI, WfM, DMI 2.0
    Support CD: Drivers, DirectX, Adobe Reader, Super Utility, Norton Internet Security
    Standards/Manageability: PCI 2.3, USB2.0, DMI 2.0
    Form Factor: ATX (12” x 9.6”)
    LES amis j'ai une question a propos de cette carte mere
    Pourquoi est-ce qu'elle n'accepte pas les core 2 gravée sur 45 nm
  2. abd-alwahid

    abd-alwahid عضو نشيط

    إنضم إلينا في:
    ‏10 أوت 2008
    الإعجابات المتلقاة:
      17-10-2008 15:49
    bien sure qu il ne marche pa avec cette carte
  3. sabri_iocne

    sabri_iocne عضو

    إنضم إلينا في:
    ‏28 أكتوبر 2007
    الإعجابات المتلقاة:
      18-10-2008 11:12
    mais pourquoi ,peut - tu m'expliquer le probleme
    il est meme pas indiqué dans les caractéristiques
    qu'ellen'accepte pas le CPU gravée sur 45nm

مشاركة هذه الصفحة

جاري تحميل الصفحة...