1. عرض جديد خاص بالإشتراك في سيرفر الأحلام و IPTV

Barryallen 4.6.73

الموضوع في 'ملفات القنوات و البلاكين و المحاكيات' بواسطة karimsara, بتاريخ ‏30 نوفمبر 2007.

  1. karimsara

    karimsara كبار الشخصيات

    إنضم إلينا في:
    ‏1 جانفي 2006
    المشاركات:
    1.969
    الإعجابات المتلقاة:
    2.206
      30-11-2007 00:26
    Barry Allen, the second Flash für PowerPC Boxen

    Hi !

    Nachdem Barry Allen als Multiboot Lösung jetzt auch für die OE basierenden PowerPC CPU basierenden boxen in der Grundfunktionalität verfügbar ist (also 7020 und 600er) ist es Zeit die Bastelstube zu verlassen und auf breiterer Basis zu testen und eure Inputs und Feedback einzuholen.

    Wenn man auf der 7020 ein Enigma1 Image in den Flash tut kann man eigentlich bereits jetzt die volle Funktionalität des BA Plugins nutzen, selbst der Bootmanager funktioniert dann wie gewohnt.

    Die gewohnten BA menu als E1 Plugin gibt es derzeit nicht, also nicht danach suchen :)

    Da die E2 Images auf der 600er noch sehr experiementell sind hat man dort halt nur das shell script interface zur verfügung, kann damit aber genauso images auf die harddisk auspacken und zum booten auswählen, was ja bis jetzt mangels Unterstützung des Flashwizzward nicht möglich war !

    Tut man ein Enigma1 Image inden Flash dann kann man mit:

    ba.sh flashforce namedesausgepacktene2imagesohnenfi

    die head.ko auch von einem ausgepackten e2 image in den Flash kopieren und den Bootmanager verwenden, aber eben mit der Einschränkung der head.ko vom E2 bei texteingaben,...

    Aber es geht iegentlich auch ohne bootmanager ganz gut wen man mit ba.sh boot das jeweilige image auswählt - siehe weiter unten.

    Wenn also wer das Beta des Barry Allen für den PowerPC testen will, anbei der Kit.

    Installation entweder über manual install im BP nachdem man es per FTp auf /tmp kopiert hat, oder:

    cd /tmp
    ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk

    die wichtigsten Befehle im Telnet:

    cd /media/ba
    ba.sh extract namedesimagesohnenfi nameimbootmenu

    (image muss man vorher auf /MB_mages auf der dreambox FTPed haben, ist normal ein link zu /media/hdd/MB_Images)

    ba.sh boot nameimbootmenu

    ba.sh info

    zeigt an was man gebootet hat.

    ba.sh disablebootmanager

    das disabled den bootmanager falls man eh immer nur 1 image booten will, bzw er eh noch nicht funktioniert weil man nur enigma1 images verwenden will

    ba.sh backup nameimbootmenu

    erstellt ein nfi backup (booted für das gebootete image verwenden)

    Also Viel Spass beim testen, und wenn wer die Menus vom Barry Allen als Enigma1 Plugin nachbauen will soll er sich in der Bastelstube melden (vor miraus erstmals auch nur mit dem Flexmenu - es sind ja eh nur immer die Shell script aufrufe dahinter die die eigentliche Arbeit tun) !

    Am portieren des Bootmanagers das er auch ohne E2 image im Flash bzw. head.ko tauschen geht und auch auf der 600er funktioniert wird übrigens schon gearbeitet, aber da müsst Ihr Euch noch ein bischen gedulden !

    Und falls sich wer noch nicht mit BA auseinadergesetzt hat - die Doku dafür gibt es auf www.oozoon.de, in einem enimga2 image für die 7020 gilt die im Prinzip 1:1 genauso wie auf der 7025 für die sie geschrieben wurde.

    LG
    gutemine2

    PS: Und Nein, für die nicht OE basierenden boxen (7000,...) ist es nicht geplant BA verfügbar zu machen, obwohl das theoretisch auch ginge.

    EDIT - der restart enigma1 und der timers share bug unter enigma1 sollten jetzt gefixed sein, einfach den neuen r6 kit mit den bugfixes nochmals runterladen und damit dann nochmals ipkg install damit machen.

    thx to gutemine2

    enigma2-plugin-extensions-barryallen_0.3 .2-r6_powerpc.ipk
     

    الملفات المرفقة:


  2. karimsara

    karimsara كبار الشخصيات

    إنضم إلينا في:
    ‏1 جانفي 2006
    المشاركات:
    1.969
    الإعجابات المتلقاة:
    2.206
      28-01-2008 09:54
    ================================================== ==
    Barry Allen for Dreambox 7025, 7020 and 600
    ================================================== ==
    Version 4.4.2 by gutemine from 20.01.2008
    ================================================== ==
    Release infos
    ================================================== ==
    0.1.0 first official Version
    0.1.1 add LCD support, copy, rename and erase
    0.2.0 add backup and more tools options
    0.2.1 bugfixes
    0.2.2 quod erat demonstrandum
    0.3.0 WebIF and Wizards
    0.3.1 nl, 12 images, bugfixes
    0.3.2 tar.bz2 images, instant extract
    0.4.0 OE 1.5 support, Flashing and user scripts WebIF
    0.4.1 keep squashfs and Barry Allen gets fat
    0.4.2 time for a new version and new language fr
    0.4.3 feeding the GNU
    0.4.4 time for a new version
    ================================================== ==
    Thanks to noggie for his nfi file tools !
    Thanks to DarkVolli for the enigma1 plugin !
    ================================================== ==

    1) Prerequisites

    During the installation there has to be CF
    card in the Dreambox (attention: insert or remove
    into Dreambox 7025 cardreader only when Dreambox
    is turned off), or an USB stick which is successfully
    detected (in case of problems try an USB Hub).

    If Barry Allen on USB is used then put
    the CVS Image from OoZooN in Flash, because this image
    has the USB drivers permanently built into the kernel.

    If neither CF card not USB Stick are attached then
    installation takes place on the Harddisk. Because
    the images then also run from there it will run
    permanently and it could be necessary that you disable
    Harddisk Standby in the images to allow running Barry
    Allen stable from Harddisk.


    2) Installation

    First boot from Flash and then copy the file
    enigma2-plugin-extensions-barryallen*.ipk
    to /tmp with ftp (TCP/IP must be working already).

    If you have an image in Flash that offers a Blue
    Pannel Manual Addon Install, then you can use this
    functionality to install the ipk file.

    If not, then install Barry Allen by entering the
    following commands in a Telnet session:

    cd /
    ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk

    Then restart enigma2 and the Barry Allen Plugin
    shoudl show up under Games / Plugins.

    In the Images installed by Barry Allen you don't have
    to install the Barry Allen Plugin anymore.
    The Barry Allen Plugin integrates himself into then
    automatically during the image extract.

    And you can remove Barry Allen if you are booted
    from Flash:

    ipkg remove enigma2-plugin-extensions-barryallen

    3) Usage

    There is now the enigma2 Plugin of Barry Allen included
    under Games / Plugins of the enigma2 menu,
    which offers the full functionality of Barry Allen.

    For extracting of nfi images in Barry Allen copy the
    image files to /MB_Images (normally a link to
    /media/hdd/MB_Images created during Barry Allen
    installation)

    If there are Problems with image extraction or other tasks
    with the enigma2 plugin try doing it in telnet:

    cd /media/ba
    ba.sh extract nameoftheimage

    On the next reboot this new Image should be available
    in the bootmanager for choosing to boot it and then it
    can be customized and used as usual.

    The Bootmanager now should remember the last booted
    image and hence recordings from Deepstandby should work
    now.

    ================================================== ==
    Have Fun using Barry Allen on the Dreambox !!!!
    ================================================== ==
     
    4 شخص معجب بهذا.
  3. zaghouanibechir

    zaghouanibechir عضو مميز

    إنضم إلينا في:
    ‏20 جوان 2006
    المشاركات:
    661
    الإعجابات المتلقاة:
    356
      04-03-2008 01:32
    الاصدار الأخير لبلاجين BarryAllen

    الخصائص و طريقة التنصيب :

    كود (text):
    ====================================================
    Barry Allen for Dreambox 7025, 7020 and 600 (and a little bit of 800)
    ====================================================
    Version 4.4.6 by gutemine from 29.02.2008
    ====================================================
    Release infos
    ====================================================
    0.1.0 first official Version
    0.1.1 add LCD support, copy, rename and erase
    0.2.0 add backup and more tools options
    0.2.1 bugfixes
    0.2.2 quod erat demonstrandum
    0.3.0 WebIF and Wizards
    0.3.1 nl, 12 images, bugfixes
    0.3.2 tar.bz2 images, instant extract
    0.4.0 OE 1.5 support, Flashing and user scripts WebIF
    0.4.1 keep squashfs and Barry Allen gets fat
    0.4.2 time for a new version and new language fr
    0.4.3 feeding the GNU
    0.4.4 time for a new version
    4.4.6 preliminary dm800 support
    ====================================================
    1) Prerequisites
     
    During the installation there has to be CF
    card in the Dreambox (attention: insert or remove
    into Dreambox 7025 cardreader only when Dreambox
    is turned off), or an USB stick which is successfully
    detected (in case of problems try an USB Hub).
     
    If Barry Allen on USB is used then put
    the CVS Image from OoZooN in Flash, because this image
    has the USB drivers permanently built into the kernel.
     
    If neither CF card not USB Stick are attached then
    installation takes place on the Harddisk. Because
    the images then also run from there it will run
    permanently and it could be necessary that you disable
    Harddisk Standby in the images to allow running Barry
    Allen stable from Harddisk.
     
     
    2) Installation
     
    First boot from Flash and then copy the file
    enigma2-plugin-extensions-barryallen*.ipk
    to /tmp with ftp (TCP/IP must be working already).
     
    If you have an image in Flash that offers a Blue
    Pannel Manual Addon Install, then you can use this
    functionality to install the ipk file.
     
    If not, then install Barry Allen by entering the
    following commands in a Telnet session:
     
    cd /
    ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk
     
    Then restart enigma2 and the Barry Allen Plugin
    shoudl show up under Games / Plugins.
     
    In the Images installed by Barry Allen you don't have
    to install the Barry Allen Plugin anymore.
    The Barry Allen Plugin integrates himself into then
    automatically during the image extract.
     
    And you can remove Barry Allen if you are booted
    from Flash:
     
    ipkg remove enigma2-plugin-extensions-barryallen
     
    3) Usage
     
    There is now the enigma2 Plugin of Barry Allen included
    under Games / Plugins of the enigma2 menu,
    which offers the full functionality of Barry Allen.
     
    For extracting of nfi images in Barry Allen copy the
    image files to /MB_Images (normally a link to
    /media/hdd/MB_Images created during Barry Allen
    installation)
     
    If there are Problems with image extraction or other tasks
    with the enigma2 plugin try doing it in telnet:
     
    cd /media/ba
    ba.sh extract nameoftheimage
     
    On the next reboot this new Image should be available
    in the bootmanager for choosing to boot it and then it
    can be customized and used as usual.
     
    The Bootmanager now should remember the last booted
    image and hence recordings from Deepstandby should work
    now.
     
    ====================================================
    Have Fun using Barry Allen on the Dreambox !!!!
    ====================================================
     
     
     
     

    الملفات المرفقة:

    3 شخص معجب بهذا.
  4. zaghouanibechir

    zaghouanibechir عضو مميز

    إنضم إلينا في:
    ‏20 جوان 2006
    المشاركات:
    661
    الإعجابات المتلقاة:
    356
      21-03-2008 00:43
    في المرفقات الاصدار الأخير من بلاجين Barry Allen 4.4.8

    كود (text):
    ====================================================
    Barry Allen for Dreambox 7025, 7020 and 600 (and a little bit of 800)
    ====================================================
    Version 4.4.8 by gutemine from 16.03.2008
    ====================================================
    Release infos
    ====================================================
    0.1.0 first official Version
    0.1.1 add LCD support, copy, rename and erase
    0.2.0 add backup and more tools options
    0.2.1 bugfixes
    0.2.2 quod erat demonstrandum
    0.3.0 WebIF and Wizards
    0.3.1 nl, 12 images, bugfixes
    0.3.2 tar.bz2 images, instant extract
    0.4.0 OE 1.5 support, Flashing and user scripts WebIF
    0.4.1 keep squashfs and Barry Allen gets fat
    0.4.2 time for a new version and new language fr
    0.4.3 feeding the GNU
    0.4.4 time for a new version
    4.4.6 preliminary dm800 support
    ====================================================
    Thanks to noggie for his nfi file tools !
    Thanks to DarkVolli for the enigma1 plugin !
    ====================================================
     
    1) Prerequisites
     
    During the installation there has to be CF
    card in the Dreambox (attention: insert or remove
    into Dreambox 7025 cardreader only when Dreambox
    is turned off), or an USB stick which is successfully
    detected (in case of problems try an USB Hub).
     
    If Barry Allen on USB is used then put
    the CVS Image from OoZooN in Flash, because this image
    has the USB drivers permanently built into the kernel.
     
    If neither CF card not USB Stick are attached then
    installation takes place on the Harddisk. Because
    the images then also run from there it will run
    permanently and it could be necessary that you disable
    Harddisk Standby in the images to allow running Barry
    Allen stable from Harddisk.
     
     
    2) Installation
     
    First boot from Flash and then copy the file
    enigma2-plugin-extensions-barryallen*.ipk
    to /tmp with ftp (TCP/IP must be working already).
     
    If you have an image in Flash that offers a Blue
    Pannel Manual Addon Install, then you can use this
    functionality to install the ipk file.
     
    If not, then install Barry Allen by entering the
    following commands in a Telnet session:
     
    cd /
    ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk
     
    Then restart enigma2 and the Barry Allen Plugin
    shoudl show up under Games / Plugins.
     
    In the Images installed by Barry Allen you don't have
    to install the Barry Allen Plugin anymore.
    The Barry Allen Plugin integrates himself into then
    automatically during the image extract.
     
    And you can remove Barry Allen if you are booted
    from Flash:
     
    ipkg remove enigma2-plugin-extensions-barryallen
     
    3) Usage
     
    There is now the enigma2 Plugin of Barry Allen included
    under Games / Plugins of the enigma2 menu,
    which offers the full functionality of Barry Allen.
     
    For extracting of nfi images in Barry Allen copy the
    image files to /MB_Images (normally a link to
    /media/hdd/MB_Images created during Barry Allen
    installation)
     
    If there are Problems with image extraction or other tasks
    with the enigma2 plugin try doing it in telnet:
     
    cd /media/ba
    ba.sh extract nameoftheimage
     
    On the next reboot this new Image should be available
    in the bootmanager for choosing to boot it and then it
    can be customized and used as usual.
     
    The Bootmanager now should remember the last booted
    image and hence recordings from Deepstandby should work
    now.
     
    ====================================================
    Have Fun using Barry Allen on the Dreambox !!!!
    ====================================================
     
     

    الملفات المرفقة:

    2 شخص معجب بهذا.
  5. rayda

    rayda عضو فعال

    إنضم إلينا في:
    ‏26 نوفمبر 2005
    المشاركات:
    419
    الإعجابات المتلقاة:
    88
      25-03-2008 20:04
    ====================================================
    Barry Allen for Dreambox 7020 and 600
    ====================================================
    Version 4.4.9 / 24.03.2008
    ====================================================
    Release infos
    ====================================================
    0.1.0 first official Version
    0.1.1 add LCD support, copy, rename and erase
    0.2.0 add backup and more tools options
    0.2.1 bugfixes
    0.2.2 quod erat demonstrandum
    0.3.0 WebIF and Wizards
    0.3.1 nl, 12 images, bugfixes
    0.3.2 tar.bz2 images, instant extract
    0.4.0 OE 1.5 and user scripts WebIF
    0.4.1 keep squashfs and Barry Allen gets fat
    0.4.2 time for a new version and new language fr,
    enigma1 plugin
    0.4.3 feeding the gnu
    4.4.0 time for a new version
    4.4.6 preliminary DM800 support
    ====================================================


    1) Prerequisites

    During the installation there has to be CF
    card in the Dreambox (attention: insert or remove
    into Dreambox 7025 cardreader only when Dreambox
    is turned off), or an USB stick which is successfully
    detected (in case of problems try an USB Hub).

    If Barry Allen on USB is used then put
    the CVS Image from OoZooN in Flash, because this image
    has the USB drivers permanently built into the kernel.

    If neither CF card not USB Stick are attached then
    installation takes place on the Harddisk. Because
    the images then also run from there it will run
    permanently and it could be necessary that you disable
    Harddisk Standby in the images to allow running Barry
    Allen stable from Harddisk.


    2) Installation

    First boot from Flash and then copy the file
    enigma2-plugin-extensions-barryallen*.ipk
    to /tmp with ftp (TCP/IP must be working already).

    If you have an image in Flash that offers a Blue
    Pannel Manual Addon Install, then you can use this
    functionality to install the ipk file.

    If not, then install Barry Allen by entering the
    following commands in a Telnet session:

    cd /
    ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk

    Then restart enigma2 and the Barry Allen Plugin
    shoudl show up under Games / Plugins.

    In the Images installed by Barry Allen you don't have
    to install the Barry Allen Plugin anymore.
    The Barry Allen Plugin integrates himself into then
    automatically during the image extract.

    And you can remove Barry Allen if you are booted
    from Flash:

    ipkg remove enigma2-plugin-extensions-barryallen

    3) Usage

    There is now the enigma2 Plugin of Barry Allen included
    under Games / Plugins of the enigma2 menu,
    which offers the full functionality of Barry Allen.

    For extracting of nfi images in Barry Allen copy the
    image files to /MB_Images (normally a link to
    /media/hdd/MB_Images created during Barry Allen
    installation)

    If there are Problems with image extraction or other tasks
    with the enigma2 plugin try doing it in telnet:

    cd /media/ba
    ba.sh extract nameoftheimage

    On the next reboot this new Image should be available
    in the bootmanager for choosing to boot it and then it
    can be customized and used as usual.

    The Bootmanager now should remember the last booted
    image and hence recordings from Deepstandby should work
    now.

    ====================================================
    Have Fun using Barry Allen
    on your Dreambox !!!!
    ====================================================
     

    الملفات المرفقة:

    2 شخص معجب بهذا.
  6. mbm2004

    mbm2004 خبير الدريم بوكس

    إنضم إلينا في:
    ‏5 جانفي 2007
    المشاركات:
    84
    الإعجابات المتلقاة:
    414
      11-06-2008 03:48






    Barry Allen v4.5.6 for Dreambox 7025, 7020, 600 and 800

    [​IMG]

    كود (text):

    Version 4.5.6 by gutemine from 09.06.2008
    ================================================== ==
    Release infos
    ================================================== ==
    0.1.0 first official Version
    0.1.1 add LCD support, copy, rename and erase
    0.2.0 add backup and more tools options
    0.2.1 bugfixes
    0.2.2 quod erat demonstrandum
    0.3.0 WebIF and Wizards
    0.3.1 nl, 12 images, bugfixes
    0.3.2 tar.bz2 images, instant extract
    0.4.0 OE 1.5 support, Flashing and user scripts WebIF
    0.4.1 keep squashfs and Barry Allen gets fat
    0.4.2 time for a new version and new language fr
    0.4.3 feeding the GNU
    0.4.4 time for a new version
    4.4.6 preliminary dm800 support
    4.5.1 DM 800 support
    ================================================== ==
    Thanks to noggie for his nfi file tools !
    Thanks to DarkVolli for the enigma1 plugin !
    ================================================== ==

    1) Prerequisites

    During the installation there has to be CF
    card in the Dreambox (attention: insert or remove
    into Dreambox 7025 cardreader only when Dreambox
    is turned off), or an USB stick which is successfully
    detected (in case of problems try an USB Hub).

    If Barry Allen on USB is used then put
    the CVS Image from OoZooN in Flash, because this image
    has the USB drivers permanently built into the kernel.

    If neither CF card not USB Stick are attached then
    installation takes place on the Harddisk. Because
    the images then also run from there it will run
    permanently and it could be necessary that you disable
    Harddisk Standby in the images to allow running Barry
    Allen stable from Harddisk.


    2) Installation

    First boot from Flash and then copy the file
    enigma2-plugin-extensions-barryallen*.ipk
    to /tmp with ftp (TCP/IP must be working already).

    If you have an image in Flash that offers a Blue
    Pannel Manual Addon Install, then you can use this
    functionality to install the ipk file.

    If not, then install Barry Allen by entering the
    following commands in a Telnet session:

    cd /
    ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk

    Then restart enigma2 and the Barry Allen Plugin
    shoudl show up under Games / Plugins.

    In the Images installed by Barry Allen you don't have
    to install the Barry Allen Plugin anymore.
    The Barry Allen Plugin integrates himself into then
    automatically during the image extract.

    And you can remove Barry Allen if you are booted
    from Flash:

    ipkg remove enigma2-plugin-extensions-barryallen

    3) Usage

    There is now the enigma2 Plugin of Barry Allen included
    under Games / Plugins of the enigma2 menu,
    which offers the full functionality of Barry Allen.

    For extracting of nfi images in Barry Allen copy the
    image files to /MB_Images (normally a link to
    /media/hdd/MB_Images created during Barry Allen
    installation)

    If there are Problems with image extraction or other tasks
    with the enigma2 plugin try doing it in telnet:

    cd /media/ba
    ba.sh extract nameoftheimage

    On the next reboot this new Image should be available
    in the bootmanager for choosing to boot it and then it
    can be customized and used as usual.

    The Bootmanager now should remember the last booted
    image and hence recordings from Deepstandby should work
    now.

    ================================================== ==
    Have Fun using Barry Allen on the Dreambox !!!!

    [​IMG]


    :satelite::satelite:
    :kiss:

     

    الملفات المرفقة:

    2 شخص معجب بهذا.

  7. rayda

    rayda عضو فعال

    إنضم إلينا في:
    ‏26 نوفمبر 2005
    المشاركات:
    419
    الإعجابات المتلقاة:
    88
      03-08-2008 01:32
    voici le tout dernier barry allen plugin




    par contre ma question est quelle est la difference entre l'extension powerpc et mipsel car j'ai une dreambox 600 et n'accepte que les powerpc du coup je suis arreté à la version 4.5.6
    svp si qqleq'un connait une solution qu'il n'hésites pas et merci
     

    الملفات المرفقة:

    1 person likes this.
  8. SIOUD

    SIOUD مستشار فريق الدريم بوكس طاقم الإدارة

    إنضم إلينا في:
    ‏5 نوفمبر 2007
    المشاركات:
    6.309
    الإعجابات المتلقاة:
    20.746
      14-09-2008 21:24
    Barry Allen v. 4.6.4 for Enigma2


    [​IMG]
     

    الملفات المرفقة:

  9. sami73

    sami73 مسؤول سابق

    إنضم إلينا في:
    ‏6 فيفري 2007
    المشاركات:
    10.460
    الإعجابات المتلقاة:
    30.180
      22-10-2008 00:56
    :besmellah1:

    Barry allen version: 4.6.11
    Du 21-10-2008



    :satelite:
     

    الملفات المرفقة:

    1 person likes this.
  10. sami73

    sami73 مسؤول سابق

    إنضم إلينا في:
    ‏6 فيفري 2007
    المشاركات:
    10.460
    الإعجابات المتلقاة:
    30.180
      19-12-2008 22:08
    :besmellah2:


    Barry Allen 4.6.44 version pour DM7025


    :tunis:
     

    الملفات المرفقة:

    1 person likes this.

مشاركة هذه الصفحة

جاري تحميل الصفحة...