Barryallen 4.6.73

karimsara

كبار الشخصيات
إنضم
1 جانفي 2006
المشاركات
2.052
مستوى التفاعل
2.543
Barry Allen, the second Flash für PowerPC Boxen

Hi !

Nachdem Barry Allen als Multiboot Lösung jetzt auch für die OE basierenden PowerPC CPU basierenden boxen in der Grundfunktionalität verfügbar ist (also 7020 und 600er) ist es Zeit die Bastelstube zu verlassen und auf breiterer Basis zu testen und eure Inputs und Feedback einzuholen.

Wenn man auf der 7020 ein Enigma1 Image in den Flash tut kann man eigentlich bereits jetzt die volle Funktionalität des BA Plugins nutzen, selbst der Bootmanager funktioniert dann wie gewohnt.

Die gewohnten BA menu als E1 Plugin gibt es derzeit nicht, also nicht danach suchen :)

Da die E2 Images auf der 600er noch sehr experiementell sind hat man dort halt nur das shell script interface zur verfügung, kann damit aber genauso images auf die harddisk auspacken und zum booten auswählen, was ja bis jetzt mangels Unterstützung des Flashwizzward nicht möglich war !

Tut man ein Enigma1 Image inden Flash dann kann man mit:

ba.sh flashforce namedesausgepacktene2imagesohnenfi

die head.ko auch von einem ausgepackten e2 image in den Flash kopieren und den Bootmanager verwenden, aber eben mit der Einschränkung der head.ko vom E2 bei texteingaben,...

Aber es geht iegentlich auch ohne bootmanager ganz gut wen man mit ba.sh boot das jeweilige image auswählt - siehe weiter unten.

Wenn also wer das Beta des Barry Allen für den PowerPC testen will, anbei der Kit.

Installation entweder über manual install im BP nachdem man es per FTp auf /tmp kopiert hat, oder:

cd /tmp
ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk

die wichtigsten Befehle im Telnet:

cd /media/ba
ba.sh extract namedesimagesohnenfi nameimbootmenu

(image muss man vorher auf /MB_mages auf der dreambox FTPed haben, ist normal ein link zu /media/hdd/MB_Images)

ba.sh boot nameimbootmenu

ba.sh info

zeigt an was man gebootet hat.

ba.sh disablebootmanager

das disabled den bootmanager falls man eh immer nur 1 image booten will, bzw er eh noch nicht funktioniert weil man nur enigma1 images verwenden will

ba.sh backup nameimbootmenu

erstellt ein nfi backup (booted für das gebootete image verwenden)

Also Viel Spass beim testen, und wenn wer die Menus vom Barry Allen als Enigma1 Plugin nachbauen will soll er sich in der Bastelstube melden (vor miraus erstmals auch nur mit dem Flexmenu - es sind ja eh nur immer die Shell script aufrufe dahinter die die eigentliche Arbeit tun) !

Am portieren des Bootmanagers das er auch ohne E2 image im Flash bzw. head.ko tauschen geht und auch auf der 600er funktioniert wird übrigens schon gearbeitet, aber da müsst Ihr Euch noch ein bischen gedulden !

Und falls sich wer noch nicht mit BA auseinadergesetzt hat - die Doku dafür gibt es auf www.oozoon.de, in einem enimga2 image für die 7020 gilt die im Prinzip 1:1 genauso wie auf der 7025 für die sie geschrieben wurde.

LG
gutemine2

PS: Und Nein, für die nicht OE basierenden boxen (7000,...) ist es nicht geplant BA verfügbar zu machen, obwohl das theoretisch auch ginge.

EDIT - der restart enigma1 und der timers share bug unter enigma1 sollten jetzt gefixed sein, einfach den neuen r6 kit mit den bugfixes nochmals runterladen und damit dann nochmals ipkg install damit machen.

thx to gutemine2

enigma2-plugin-extensions-barryallen_0.3 .2-r6_powerpc.ipk
 

المرفقات

  • barryalien for enigma1.zip
    2,9 MB · المشاهدات: 129
================================================== ==
Barry Allen for Dreambox 7025, 7020 and 600
================================================== ==
Version 4.4.2 by gutemine from 20.01.2008
================================================== ==
Release infos
================================================== ==
0.1.0 first official Version
0.1.1 add LCD support, copy, rename and erase
0.2.0 add backup and more tools options
0.2.1 bugfixes
0.2.2 quod erat demonstrandum
0.3.0 WebIF and Wizards
0.3.1 nl, 12 images, bugfixes
0.3.2 tar.bz2 images, instant extract
0.4.0 OE 1.5 support, Flashing and user scripts WebIF
0.4.1 keep squashfs and Barry Allen gets fat
0.4.2 time for a new version and new language fr
0.4.3 feeding the GNU
0.4.4 time for a new version
================================================== ==
Thanks to noggie for his nfi file tools !
Thanks to DarkVolli for the enigma1 plugin !
================================================== ==

1) Prerequisites

During the installation there has to be CF
card in the Dreambox (attention: insert or remove
into Dreambox 7025 cardreader only when Dreambox
is turned off), or an USB stick which is successfully
detected (in case of problems try an USB Hub).

If Barry Allen on USB is used then put
the CVS Image from OoZooN in Flash, because this image
has the USB drivers permanently built into the kernel.

If neither CF card not USB Stick are attached then
installation takes place on the Harddisk. Because
the images then also run from there it will run
permanently and it could be necessary that you disable
Harddisk Standby in the images to allow running Barry
Allen stable from Harddisk.


2) Installation

First boot from Flash and then copy the file
enigma2-plugin-extensions-barryallen*.ipk
to /tmp with ftp (TCP/IP must be working already).

If you have an image in Flash that offers a Blue
Pannel Manual Addon Install, then you can use this
functionality to install the ipk file.

If not, then install Barry Allen by entering the
following commands in a Telnet session:

cd /
ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk

Then restart enigma2 and the Barry Allen Plugin
shoudl show up under Games / Plugins.

In the Images installed by Barry Allen you don't have
to install the Barry Allen Plugin anymore.
The Barry Allen Plugin integrates himself into then
automatically during the image extract.

And you can remove Barry Allen if you are booted
from Flash:

ipkg remove enigma2-plugin-extensions-barryallen

3) Usage

There is now the enigma2 Plugin of Barry Allen included
under Games / Plugins of the enigma2 menu,
which offers the full functionality of Barry Allen.

For extracting of nfi images in Barry Allen copy the
image files to /MB_Images (normally a link to
/media/hdd/MB_Images created during Barry Allen
installation)

If there are Problems with image extraction or other tasks
with the enigma2 plugin try doing it in telnet:

cd /media/ba
ba.sh extract nameoftheimage

On the next reboot this new Image should be available
in the bootmanager for choosing to boot it and then it
can be customized and used as usual.

The Bootmanager now should remember the last booted
image and hence recordings from Deepstandby should work
now.

================================================== ==
Have Fun using Barry Allen on the Dreambox !!!!
================================================== ==
 
الاصدار الأخير لبلاجين BarryAllen

الخصائص و طريقة التنصيب :

كود:
====================================================
Barry Allen for Dreambox 7025, 7020 and 600 (and a little bit of 800)
====================================================
Version 4.4.6 by gutemine from 29.02.2008
====================================================
Release infos 
====================================================
0.1.0 first official Version 
0.1.1 add LCD support, copy, rename and erase 
0.2.0 add backup and more tools options
0.2.1 bugfixes
0.2.2 quod erat demonstrandum
0.3.0 WebIF and Wizards
0.3.1 nl, 12 images, bugfixes
0.3.2 tar.bz2 images, instant extract
0.4.0 OE 1.5 support, Flashing and user scripts WebIF
0.4.1 keep squashfs and Barry Allen gets fat
0.4.2 time for a new version and new language fr
0.4.3 feeding the GNU
0.4.4 time for a new version
4.4.6 preliminary dm800 support 
====================================================
1) Prerequisites
 
During the installation there has to be CF
card in the Dreambox (attention: insert or remove
into Dreambox 7025 cardreader only when Dreambox
is turned off), or an USB stick which is successfully
detected (in case of problems try an USB Hub).
 
If Barry Allen on USB is used then put
the CVS Image from OoZooN in Flash, because this image
has the USB drivers permanently built into the kernel.
 
If neither CF card not USB Stick are attached then
installation takes place on the Harddisk. Because
the images then also run from there it will run 
permanently and it could be necessary that you disable
Harddisk Standby in the images to allow running Barry
Allen stable from Harddisk.
 
 
2) Installation
 
First boot from Flash and then copy the file 
enigma2-plugin-extensions-barryallen*.ipk 
to /tmp with ftp (TCP/IP must be working already). 
 
If you have an image in Flash that offers a Blue 
Pannel Manual Addon Install, then you can use this 
functionality to install the ipk file.
 
If not, then install Barry Allen by entering the 
following commands in a Telnet session:
 
cd /
ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk
 
Then restart enigma2 and the Barry Allen Plugin
shoudl show up under Games / Plugins.
 
In the Images installed by Barry Allen you don't have 
to install the Barry Allen Plugin anymore. 
The Barry Allen Plugin integrates himself into then
automatically during the image extract.
 
And you can remove Barry Allen if you are booted
from Flash:
 
ipkg remove enigma2-plugin-extensions-barryallen
 
3) Usage
 
There is now the enigma2 Plugin of Barry Allen included
under Games / Plugins of the enigma2 menu,
which offers the full functionality of Barry Allen.
 
For extracting of nfi images in Barry Allen copy the
image files to /MB_Images (normally a link to 
/media/hdd/MB_Images created during Barry Allen 
installation)
 
If there are Problems with image extraction or other tasks 
with the enigma2 plugin try doing it in telnet:
 
cd /media/ba
ba.sh extract nameoftheimage
 
On the next reboot this new Image should be available
in the bootmanager for choosing to boot it and then it
can be customized and used as usual.
 
The Bootmanager now should remember the last booted
image and hence recordings from Deepstandby should work
now.
 
====================================================
Have Fun using Barry Allen on the Dreambox !!!!
====================================================
 

المرفقات

  • enigma2-plugin-extensions-barryallen_4[1].4.6_mipsel.rar
    3,7 MB · المشاهدات: 40
في المرفقات الاصدار الأخير من بلاجين Barry Allen 4.4.8

كود:
==================================================== 
Barry Allen for Dreambox 7025, 7020 and 600 (and a little bit of 800) 
==================================================== 
Version 4.4.8 by gutemine from 16.03.2008 
==================================================== 
Release infos 
==================================================== 
0.1.0 first official Version 
0.1.1 add LCD support, copy, rename and erase 
0.2.0 add backup and more tools options 
0.2.1 bugfixes 
0.2.2 quod erat demonstrandum 
0.3.0 WebIF and Wizards 
0.3.1 nl, 12 images, bugfixes 
0.3.2 tar.bz2 images, instant extract 
0.4.0 OE 1.5 support, Flashing and user scripts WebIF 
0.4.1 keep squashfs and Barry Allen gets fat 
0.4.2 time for a new version and new language fr 
0.4.3 feeding the GNU 
0.4.4 time for a new version 
4.4.6 preliminary dm800 support 
==================================================== 
Thanks to noggie for his nfi file tools ! 
Thanks to DarkVolli for the enigma1 plugin ! 
==================================================== 
 
1) Prerequisites 
 
During the installation there has to be CF 
card in the Dreambox (attention: insert or remove 
into Dreambox 7025 cardreader only when Dreambox 
is turned off), or an USB stick which is successfully 
detected (in case of problems try an USB Hub). 
 
If Barry Allen on USB is used then put 
the CVS Image from OoZooN in Flash, because this image 
has the USB drivers permanently built into the kernel. 
 
If neither CF card not USB Stick are attached then 
installation takes place on the Harddisk. Because 
the images then also run from there it will run 
permanently and it could be necessary that you disable 
Harddisk Standby in the images to allow running Barry 
Allen stable from Harddisk. 
 
 
2) Installation 
 
First boot from Flash and then copy the file 
enigma2-plugin-extensions-barryallen*.ipk 
to /tmp with ftp (TCP/IP must be working already). 
 
If you have an image in Flash that offers a Blue 
Pannel Manual Addon Install, then you can use this 
functionality to install the ipk file. 
 
If not, then install Barry Allen by entering the 
following commands in a Telnet session: 
 
cd / 
ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk 
 
Then restart enigma2 and the Barry Allen Plugin 
shoudl show up under Games / Plugins. 
 
In the Images installed by Barry Allen you don't have 
to install the Barry Allen Plugin anymore. 
The Barry Allen Plugin integrates himself into then 
automatically during the image extract. 
 
And you can remove Barry Allen if you are booted 
from Flash: 
 
ipkg remove enigma2-plugin-extensions-barryallen 
 
3) Usage 
 
There is now the enigma2 Plugin of Barry Allen included 
under Games / Plugins of the enigma2 menu, 
which offers the full functionality of Barry Allen. 
 
For extracting of nfi images in Barry Allen copy the 
image files to /MB_Images (normally a link to 
/media/hdd/MB_Images created during Barry Allen 
installation) 
 
If there are Problems with image extraction or other tasks 
with the enigma2 plugin try doing it in telnet: 
 
cd /media/ba 
ba.sh extract nameoftheimage 
 
On the next reboot this new Image should be available 
in the bootmanager for choosing to boot it and then it 
can be customized and used as usual. 
 
The Bootmanager now should remember the last booted 
image and hence recordings from Deepstandby should work 
now. 
 
==================================================== 
Have Fun using Barry Allen on the Dreambox !!!! 
====================================================
 

المرفقات

  • enigma2-plugin-extensions-barryallen_4[1].4.8_mipsel.rar
    3,8 MB · المشاهدات: 26
====================================================
Barry Allen for Dreambox 7020 and 600
====================================================
Version 4.4.9 / 24.03.2008
====================================================
Release infos
====================================================
0.1.0 first official Version
0.1.1 add LCD support, copy, rename and erase
0.2.0 add backup and more tools options
0.2.1 bugfixes
0.2.2 quod erat demonstrandum
0.3.0 WebIF and Wizards
0.3.1 nl, 12 images, bugfixes
0.3.2 tar.bz2 images, instant extract
0.4.0 OE 1.5 and user scripts WebIF
0.4.1 keep squashfs and Barry Allen gets fat
0.4.2 time for a new version and new language fr,
enigma1 plugin
0.4.3 feeding the gnu
4.4.0 time for a new version
4.4.6 preliminary DM800 support
====================================================


1) Prerequisites

During the installation there has to be CF
card in the Dreambox (attention: insert or remove
into Dreambox 7025 cardreader only when Dreambox
is turned off), or an USB stick which is successfully
detected (in case of problems try an USB Hub).

If Barry Allen on USB is used then put
the CVS Image from OoZooN in Flash, because this image
has the USB drivers permanently built into the kernel.

If neither CF card not USB Stick are attached then
installation takes place on the Harddisk. Because
the images then also run from there it will run
permanently and it could be necessary that you disable
Harddisk Standby in the images to allow running Barry
Allen stable from Harddisk.


2) Installation

First boot from Flash and then copy the file
enigma2-plugin-extensions-barryallen*.ipk
to /tmp with ftp (TCP/IP must be working already).

If you have an image in Flash that offers a Blue
Pannel Manual Addon Install, then you can use this
functionality to install the ipk file.

If not, then install Barry Allen by entering the
following commands in a Telnet session:

cd /
ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk

Then restart enigma2 and the Barry Allen Plugin
shoudl show up under Games / Plugins.

In the Images installed by Barry Allen you don't have
to install the Barry Allen Plugin anymore.
The Barry Allen Plugin integrates himself into then
automatically during the image extract.

And you can remove Barry Allen if you are booted
from Flash:

ipkg remove enigma2-plugin-extensions-barryallen

3) Usage

There is now the enigma2 Plugin of Barry Allen included
under Games / Plugins of the enigma2 menu,
which offers the full functionality of Barry Allen.

For extracting of nfi images in Barry Allen copy the
image files to /MB_Images (normally a link to
/media/hdd/MB_Images created during Barry Allen
installation)

If there are Problems with image extraction or other tasks
with the enigma2 plugin try doing it in telnet:

cd /media/ba
ba.sh extract nameoftheimage

On the next reboot this new Image should be available
in the bootmanager for choosing to boot it and then it
can be customized and used as usual.

The Bootmanager now should remember the last booted
image and hence recordings from Deepstandby should work
now.

====================================================
Have Fun using Barry Allen
on your Dreambox !!!!
====================================================
 

المرفقات

  • enigma2-plugin-extensions-barryallen_4.4.9_powerpc.rar
    3 MB · المشاهدات: 136






Barry Allen v4.5.6 for Dreambox 7025, 7020, 600 and 800

barryallenko5.jpg


كود:
Version 4.5.6 by gutemine from 09.06.2008
================================================== ==
Release infos
================================================== ==
0.1.0 first official Version
0.1.1 add LCD support, copy, rename and erase
0.2.0 add backup and more tools options
0.2.1 bugfixes
0.2.2 quod erat demonstrandum
0.3.0 WebIF and Wizards
0.3.1 nl, 12 images, bugfixes
0.3.2 tar.bz2 images, instant extract
0.4.0 OE 1.5 support, Flashing and user scripts WebIF
0.4.1 keep squashfs and Barry Allen gets fat
0.4.2 time for a new version and new language fr
0.4.3 feeding the GNU
0.4.4 time for a new version
4.4.6 preliminary dm800 support
4.5.1 DM 800 support
================================================== ==
Thanks to noggie for his nfi file tools !
Thanks to DarkVolli for the enigma1 plugin !
================================================== ==

1) Prerequisites

During the installation there has to be CF
card in the Dreambox (attention: insert or remove
into Dreambox 7025 cardreader only when Dreambox
is turned off), or an USB stick which is successfully
detected (in case of problems try an USB Hub).

If Barry Allen on USB is used then put
the CVS Image from OoZooN in Flash, because this image
has the USB drivers permanently built into the kernel.

If neither CF card not USB Stick are attached then
installation takes place on the Harddisk. Because
the images then also run from there it will run
permanently and it could be necessary that you disable
Harddisk Standby in the images to allow running Barry
Allen stable from Harddisk.


2) Installation

First boot from Flash and then copy the file
enigma2-plugin-extensions-barryallen*.ipk
to /tmp with ftp (TCP/IP must be working already).

If you have an image in Flash that offers a Blue
Pannel Manual Addon Install, then you can use this
functionality to install the ipk file.

If not, then install Barry Allen by entering the
following commands in a Telnet session:

cd /
ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk

Then restart enigma2 and the Barry Allen Plugin
shoudl show up under Games / Plugins.

In the Images installed by Barry Allen you don't have
to install the Barry Allen Plugin anymore.
The Barry Allen Plugin integrates himself into then
automatically during the image extract.

And you can remove Barry Allen if you are booted
from Flash:

ipkg remove enigma2-plugin-extensions-barryallen

3) Usage

There is now the enigma2 Plugin of Barry Allen included
under Games / Plugins of the enigma2 menu,
which offers the full functionality of Barry Allen.

For extracting of nfi images in Barry Allen copy the
image files to /MB_Images (normally a link to
/media/hdd/MB_Images created during Barry Allen
installation)

If there are Problems with image extraction or other tasks
with the enigma2 plugin try doing it in telnet:

cd /media/ba
ba.sh extract nameoftheimage

On the next reboot this new Image should be available
in the bootmanager for choosing to boot it and then it
can be customized and used as usual.

The Bootmanager now should remember the last booted
image and hence recordings from Deepstandby should work
now.

================================================== ==
Have Fun using Barry Allen on the Dreambox !!!!



:satelite::satelite:
:kiss:

 

المرفقات

  • enigma2-plugin-extensions-barryallen_4.5.8_mipsel.rar
    3,8 MB · المشاهدات: 84
  • enigma2-plugin-extensions-barryallen_4.5.9_mipsel.zip
    3,8 MB · المشاهدات: 76
voici le tout dernier barry allen plugin




par contre ma question est quelle est la difference entre l'extension powerpc et mipsel car j'ai une dreambox 600 et n'accepte que les powerpc du coup je suis arreté à la version 4.5.6
svp si qqleq'un connait une solution qu'il n'hésites pas et merci
 

المرفقات

  • enigma2-plugin-extensions-barryallen_4.6.0_mipsel.rar
    3,8 MB · المشاهدات: 53
Barry Allen v. 4.6.4 for Enigma2


soretbarryallenqb8aj5.png
 

المرفقات

  • enigma2-plugin-extensions-barryallen_4.6.4_mipsel.rar
    3,9 MB · المشاهدات: 60
:besmellah1:

Barry allen version: 4.6.11
Du 21-10-2008



:satelite:
 

المرفقات

  • enigma2-plugin-extensions-barryallen_4.6.11_mipsel.rar
    3,8 MB · المشاهدات: 89
:besmellah2:


Barry Allen 4.6.44 version pour DM7025


:tunis:
 

المرفقات

  • Barry Allen 4.6.44.rar
    4,1 MB · المشاهدات: 49
أعلى