j'ai besoin d'aide pour installer WM6

الموضوع في 'منتدى ويندوز فون Windows Phone' بواسطة tiger224, بتاريخ ‏9 فيفري 2009.

  1. tiger224

    tiger224 عضو جديد

    إنضم إلينا في:
    ‏11 نوفمبر 2006
    المشاركات:
    22
    الإعجابات المتلقاة:
    2
      09-02-2009 17:24
    j'ai besoin d'aide pour installer Windows Mobile 6
    telephone treo 750v
    svp
     
  2. majoras54

    majoras54 عضو جديد

    إنضم إلينا في:
    ‏3 سبتمبر 2007
    المشاركات:
    40
    الإعجابات المتلقاة:
    18
      10-02-2009 07:22
    :besmellah1:

    1. Download, extract, and run MAGIC_UNLOCKER on your phone.
    2. Select both options in MAGIC_UNLOCKER and click unlock. This will unlock your phone.
    3. Format your SD card to FAT32.
    4. Extract Treo750_OS5_2_19199WWE_STD.rar and copy/paste CHEEIMG.nbh to the formatted SD card.
    5. Transfer 1_CHEE_MountExtROM.cab and 2_Chee_Extrom_rename.cab to your Treo 750.
    5. Run/Install 1_CHEE_MountExtROM.cab and then soft reset the phone.
    7. Run/Install 2_Chee_Extrom_rename.cab and then soft reset the phone.
    8. Click and run Start>Programs>Chee_Extrom_Unlocker. Run it about 3 or 4 time and you should some type of error messages. Just OK or X them and soft reset the phone again.
    9. Open File Explorer and click the drop down arrow, in which you will now see ExtendROM. Open it and delete the 2 files in the partition folder.
    10. Download, extract, and run CheetahUnlocker on your computer. For this part make sure you have an ActiveSync (XP) or WMDC (Vista) connection to your phone. Click Flash SPL and go through the steps for CheetahUnlocker to Flash SPL. Don't worry about any of the other items in the menu.
    11. After going through the steps in CheetahUnlocker and the phone, the phone will enter into tri-color bootloader screen momentarily followed by Loading screen...
    12. Next, you'll see a light blue screen with the heading CHEEIMG.nhb followed by a few other entries below it. At this point, it will tell you press the power button. Go ahead and press the End Call/Power button. This will begin the ROM flashing. The ROM flashing takes about 5 to 15 minutes.
    13. When the flashing is completed, the bottom of the screen will say Update successful and the entries above with the OK seen at the end. Now reset the Treo 750 with the stylus and immediately (during the Palm Logo) perform a Hard Reset. This is accomplished by pressing and holding the End Call/Power button and simultaneously resetting the Treo 750.
    14. You will now be prompted to Erase All Data. Press the Up key of the D-Pad to continue and erase the data. This will format the phone.
    11. Upon completion, the Treo 750 will continue to boot-up and go through the initial start-up steps and wizard. Once completed, your phone will now be unlocked, unbranded, and updated to Windows Mobile 6.1.

    :satelite:
     
    1 person likes this.
  3. majoras54

    majoras54 عضو جديد

    إنضم إلينا في:
    ‏3 سبتمبر 2007
    المشاركات:
    40
    الإعجابات المتلقاة:
    18
      10-02-2009 07:25
    :oh:

    pour télécharger les fichiers nécessaire par ici
     
    1 person likes this.
  4. tiger224

    tiger224 عضو جديد

    إنضم إلينا في:
    ‏11 نوفمبر 2006
    المشاركات:
    22
    الإعجابات المتلقاة:
    2
      10-02-2009 21:20
    machkour
    baraka allaho fik
    wa7dek :kiss:
    :kiss:
     
جاري تحميل الصفحة...
مواضيع مشابهة التاريخ
code deblocage de carte sim pour nokia lumia 800 T-mobile united kingdom ‏24 ماي 2016
J'ai Oublié le Code Verrou de mon telephone nokia 501s ‏8 جويلية 2016

مشاركة هذه الصفحة

جاري تحميل الصفحة...