blm qtek 2020

الموضوع في 'منتدى ويندوز فون Windows Phone' بواسطة juba, بتاريخ ‏18 مارس 2009.

  1. juba

    juba عضو جديد

    إنضم إلينا في:
    ‏14 جانفي 2007
    المشاركات:
    39
    الإعجابات المتلقاة:
    7
      18-03-2009 21:57
    bonjour à tous
    g 1 blm sur mon pocket pc qtek2020 quand je le l'ouvre il reste bloquer sur win c koi la solution et merci d'avance
     
  2. klodtn2

    klodtn2 عضو نشيط

    إنضم إلينا في:
    ‏4 أوت 2008
    المشاركات:
    127
    الإعجابات المتلقاة:
    107
      23-03-2009 23:28
    fait un hard reset
     
  3. klodtn2

    klodtn2 عضو نشيط

    إنضم إلينا في:
    ‏4 أوت 2008
    المشاركات:
    127
    الإعجابات المتلقاة:
    107
      23-03-2009 23:31
    Qtek 2020i










    Resetting Your Pocket PC Phone

    You can perform a soft reset or a full reset. During a soft reset, the Pocket PC Phone is restarted and only some data in opened programs may be lost. However, a full reset turns the battery off, returns the device to its original factory settings, and deletes all programs, files, contacts, and other information you have saved to the device. Therefore, it is extremely important to back up data to a storage card or your computer on a regular basis in the event that a full reset has to be performed.

    Soft reset

    [​IMG]

    To perform a soft reset:

    If your Pocket PC Phone responds slowly, stops responding, or freezes, you can soft reset it. A soft reset causes the Pocket PC Phone to restart and re-adjust memory allocation. Unsaved data in any opened applications may be lost. Use the stylus to press and hold the Reset button, as shown below on the left.

    Press the Reset button to return all parameters to their default value

    [​IMG]

    Hard reset

    To perform a full reset
    A full device reset clears memory, deletes all data, and restores the Pocket PC Phone to its default settings. Programs installed at the factory remain. All data that you have created and programs you have installed are erased.
    Press and hold the Power button, and then use your stylus to press the “soft reset button” at the same time, as shown above on the right. Be sure you have backed up all your data on an SD card or on a desktop PC before performing a full reset.

    [​IMG]
     
  4. klodtn2

    klodtn2 عضو نشيط

    إنضم إلينا في:
    ‏4 أوت 2008
    المشاركات:
    127
    الإعجابات المتلقاة:
    107
      25-03-2009 00:45
    ou etes vous???? ??
     
  5. juba

    juba عضو جديد

    إنضم إلينا في:
    ‏14 جانفي 2007
    المشاركات:
    39
    الإعجابات المتلقاة:
    7
      25-03-2009 04:26
    merci frero pour votre attention oui g fé 7 hard reset mais le back up g pas fé .quand g fé le HR il s'affiche sur l'écran serial 1.1
    dc le blm il faut mnt flasher le pocket ou non? si oui comment le faire
    merci d'avance
     

مشاركة هذه الصفحة

جاري تحميل الصفحة...